Rod Fix RS-750 (300 ml) Anchor bolt fixing Chemical (Pack of 12)

By Brand : Rod Fix

Avg Customer Reviews :

Features of Rod Fix RS-750 CHEMICAL: 1)High Load Anchor for concrete 2)Fast Cure 3)Thixotropic, so suitable for vertical or horizontal fixing 4)Works perfectly in dry, wet and even flooded holes 5)High load capacity 6)Expansion-free fixing 7)Very low odour 8)Good Chemical Resistance 9)Anchoring close to substrate edges and at reduced anchor spacing 10)European Technical Approval ETA (ETAG 001 Part 5 Option 7) for threaded bars 11)LEED Tested 12)A+ classification according to compulsory French VOC emissions regulation Usage Instructions for Rod Fix RS-750 CHEMICAL: 1)Drill hole to the correct diameter and depth 2)Clean the hole using a brush and compressed air in the following sequence: 2 × blow, 2 × brush, 2 × blow, 2 × brush, 2 × blow 3)Once the holes are prepared, remove the screw cap from the cartridge 4)Attach mixer nozzle provided with the cartridge 5)Place the cartridge in the applicator gun 6)Dispense approx 10ml of resin to waste until an even colour is achieved 7)Inject resin into the far end of the hole and fill approx 2/3 full 8)Insert a threaded bar with a rotating motion to the bottom of the hole and leave it undisturbed until load time has elapsed 9)Where appropriate attach the fixture and tighten the nut.