Building Supplies Store

• Professionalism - Designed specifically for Shure MV7 microphones, suppress popping sounds to maintain clear audio.
• 3 Layer Desgin Pop filter is made from double layered steel meshs in outside and one layered foam windscreen in middle. It optimizes air current diffusion for maximum audio transparency that eliminates plosives far more effectively than fabric filters.
• Adjustable Gooseneck - The steel metal gooseneck holder fully supports the filter s weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice.
• Durability - Wind Pop Screen is made of stainless steel material, prevent spattering saliva from rusting that can be used for a long time.
• Easy to Install - Adjustable screw rotating clamp with Rubber pad attached design prevent stand from scratching.adjustable clamp to allow easy adjustment and placement.

• Wall Mount Holder for Boom Arm - Aluminum alloy material, strong and durable. Installed on the wall, it not only solves the trouble of easy displacement of the table clip, but also saves space. Built-in plastic pads keep the screws out of direct contact with the mic stand, protecting it from wear and deformation.
• Upgradedt Desk Clamp - The structure of the pyramid makes the stress act on the table instead of the edge, which can avoid slipping or breaking, the gasket in contact with the table is made of high-quality rubber, and the texture of the surface enhances its friction, making it stronger Excellent grip, thickened metal makes the base stronger, non-slip and anti-break. (Clip up to 6cm / 2.36\" table height.)
• Perfect Boom Arm - Suspension boom arm stand fit your HyperX SoloCast Microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice. Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise.
• Professional Pop Filter - Foam Cover improve audio quality and eliminate background noise. Blocks out plosives, pop, breath and wind noise without noticeable distortion or muffling of the voice. Fits like a glove and protects mic from flying spittle. Protect your HyperX SoloCast from harmful, dust and moisture.
• Package Included - 1x Windscreen only for HyperX SoloCast microphone, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8\" to 5/8\" Match most microphones and shock mount), 1x Desk Clamp, 1x Wall Mount Holder for Boom Arm (including install accessories). Not including HyperX SoloCast the microphone.

• Perfect Effect - Suspension boom arm hold your Shure MV7 USB Podcast Microphone in any position you want. No sag, just rock solid.
• Professional Pop Filter - Foam windscreen cover compatible with Shure MV7 microphones Pop Filter improves the recording quality by drastically filter out all unwanted background noises.
• Mic Stand - Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89\"/4.8cm thick. The stand arm can be extended up to 27.6\"/70cm.
• Sturdy Material & Improved Load-Bearing - The arm stand is made of sturdy steel, it can bear Max weight of 3.1 Pound (1.4 KG).? Ideal for podcasting, broadcasting, streaming and voice recording setups.
• Package -? Includes MV7 Mic stand, table mounting clamp, foam pop fiter and 5/8\" Screw Adapter. Not includes Shure MV7 microphone.

• Perfect Boom Arm: Suspension boom arm stand fit your Fifine K669 Mic suitable. Max support weight is 3 Pound (1.4 KG). Easily adjust the mic to the suitable angle or height.
• Professional Windscreen: Foam pop filter designed for Fifine 669B microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
• Stability: Mic boom arm is dual suspension springs on each boom arm, prevent the microphone from shaking, sinking and making noise.
• Wire hider: Wrap the cable management sleeves around your cords and within a few seconds you can enjoy a tidy and lovable living/working environment.
• Package included: 1 x Fifine K669 Windscreen, 1 x K669 Mic Scissor Arm Stand, 2 x Cable Sleeve. Mic not included.

• Perfect Boom Arm: Suspension boom arm stand fit your Blue Yeti Mic suitable. Max support weight is 3 Pound (1.4 KG). Easily adjust the mic to the suitable angle or height.
• Professional Windscreen: Foam pop filter designed for Blue Yeti Pro microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
• Stability: Mic boom arm is dual suspension springs on each boom arm, prevent the microphone from shaking, sinking and making noise.
• Wire hider: Wrap the cable management sleeves around your cords and within a few seconds you can enjoy a tidy and lovable living/working environment.
• Package included: 1 x Blue Yeti Windscreen, 1 x Yeti Mic Scissor Arm Stand, 2 x Cable Sleeve. Mic not included.

• Perfect Boom Arm: Suspension boom arm stand fit your Razer Seiren X Mic suitable. Max support weight is 3 Pound (1.4 KG). Easily adjust the mic to the suitable angle or height.
• Professional Windscreen: Foam pop filter designed for Razer Seiren X microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
• Stability: Mic boom arm is dual suspension springs on each boom arm, prevent the microphone from shaking, sinking and making noise.
• Wire hider: Wrap the cable management sleeves around your cords and within a few seconds you can enjoy a tidy and lovable living/working environment.
• Package included: 1 x Razer Seiren X Windscreen, 1 x Seiren X Mic Scissor Arm Stand, 2 x Cable Sleeve. Mic not included.

• Suspension shock mount mic holder isolates condenser mics from most physical vibration, floor noise. Like floor tapping, desk bumping, adjusting the boom.
• Shockmount made of elasticity rope, the plastic shock mount prevents the microphone from falling all-around and makes your AT2020 microphone more convenient to install.
• Widely used for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x condenser mic.
• The angle-adjustable 3/8\" to 5/8\" screw adapter is easily attached to any universal mic boom arm or mic stand.
• Fits microphone diameter ranging from 1.9\" to 20.\"? ?47mm-51mm?. Package: 1 x Shock Mount.

• Perfect Boom Arm: Suspension boom arm stand fit your Blue Snowball Mic suitable. Max support weight is 3 Pound (1.4 KG). Easily adjust the mic to the suitable angle or height.
• Professional Windscreen: Foam pop filter designed for Blue Snowball Ice microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
• Stability: Mic boom arm is dual suspension springs on each boom arm, prevent the microphone from shaking, sinking and making noise.
• Wire hider: Wrap the cable management sleeves around your cords and within a few seconds you can enjoy a tidy and lovable living/working environment.
• Package included: 1 x Blue Snowball Windscreen, 1 x Snowball Mic Scissor Arm Stand, 2 x Cable Sleeve. Mic not included.

• Boom Arm - Suspension boom arm stand fit your HyperX QuadCast suitable, you can adjust the mic to the suitable angle or height to show your voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic.
• Stability - Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise.
• Mic stand - Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8\"to 5/8\"for adapting HyperX QuadCast.
• Table Clamp Base - Suspension boom arm comes with one desk clamp, can clip to any desktop up to 1.89\"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw.
• Package - Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8\" to 5/8\" match most microphones and shock mount Pre-installation completed). Note: NOT INCLUDED STREAMING MIC.
• Mic Mount Adapter - The product does not include a Mic Mount Adapter. Many users report a lack of accessories.After communicating with them, we found that the original product content was complete and not missing, but rather missing a QuadCast Adapter. This part is provided in the packaging of HyperX Mic. There are also some buyers who are missing and unable to install this part.If you happen to be missing this part, you can purchase it together with our bundling or promotion??
• It s Not Just That - This Mic Arm is also compatible with various models of microphones For example: Blue Yeti, Yeti x, Yeti pro, HyperX solocast,MV7, SM7B, Fifine K688, K658, Rode, Razer Mini etc.

• Perfect Boom Arm - Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice.
• Stability - Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise.
• Mic Clip Holder - A standard microphone clip to mount most standard-sized handheld microphone.
• Mic Stand - Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89\"/4.8cm thick. The stand arm can be extended up to 27.6\"/70cm. Max support weight is 3.1 Pound (1.4 KG).
• Package - Included1x HyperX SoloCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8\" to 5/8\" match most microphones and shock mount). Note: NOT INCLUDED MICROPHONE.

• This Windshield is specially designed for Blue Yeti, Yeti Pro Condenser microphone and other similar sized USB microphones.
• Minimazes wind noise and other noise interference, filter out all unwanted background noises. Improves the recording quality.
• Wind cover can keep your Blue Yeti off harmful dust, moisture, spit, scratches and saliva damages. Give your mic a good protection.
• Blue Yeti Mic Windscreen made from high quality sponge.
• Ideal for podcasting, ASMR videos, field recording, gaming streams and musical instruments. Microphone and Others are NOT Included.

• 6 Layer Pop Filter This mic pop filter combines metal and sponge mateiral. Special look professional design - block out the B P plosives and noisy background more efficiently, provides you with clear vocal, enjoy your recording time and reduce post-editing time.
• High Density Foam Cover The customized windscreen is perfectly adapted to HyperX QuadCast, HyperX QuadCast S, which can reduce the wind noise and keep your HyperX QuadCast mic free from dust and saliva, extend the life of your microphone.
• High Compatibility L-clamp The L-shaped clip design makes it easier to clip more shapes, such as your hyperx quadcast boom arm, mic base, floor mic stand and so on. With rubber pads at the clamp bottom, allows your pop filter keep in place.
• Adjustable Gooseneck The pop screen gooseneck is made of carbon steel material, which is strong and pliable. You can twist as much as you want to change its shape and position, it will stay in place, without falling and wobbling.
• Hily Quality Sound Pop filter for mic can break up the air flow, so the airflow force can be reduced after it pass throught 6 layer screen and mic cover. The pop filter microphone cover set is ideal for vocal recording, podcasting, singing, streaming, broadcasting and so on.

• Professional Shockmount - Special design for Shure SM58-LC, SM58-CN Cardioid Dynamic Vocal Microphone. Fits perfectly, without the slightest fear of it falling out.
• Anti Vibration and Noise - Shock mount keep the mic in place that can effectively absorbing vibrations and noise by the mic from moving or banging on the table.
• Adjustability and Flexibility - Comes with a 5/8\" to 3/8\" screw adapter for easy connection to universal microphone boom or stand. e.g. concert to your Rode PSA1 mic stand.
• High Quality - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.
• Sturdy clip - Clip on the shock mount can hold a fairly heavy dynamic mic to prevent the microphone from falling. 180 degree Ajustable can adjust the angle as you like.

• Perfect Boom Arm: Suspension boom arm stand fit your Audio-Technica AT2020 Mic suitable. Max support weight is 3 Pound (1.4 KG). Easily adjust the mic to the suitable angle or height.
• Professional Windscreen: Foam pop filter designed for Audio-Technica AT2020V microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
• Stability: Mic boom arm is dual suspension springs on each boom arm, prevent the microphone from shaking, sinking and making noise.
• Wire hider: Wrap the cable management sleeves around your cords and within a few seconds you can enjoy a tidy and lovable living/working environment.
• Package included: 1 x Audio-Technica AT2020 Windscreen, 1 x AT2020 Mic Scissor Arm Stand, 2 x Cable Sleeve. Mic not included.

• Professional Shockmount - Special design for SM58S, 58S Cardioid Dynamic Microphone. Fits perfectly, without the slightest fear of it falling out.
• Anti Vibration and Noise - Shock mount keep the mic in place that can effectively absorbing vibrations and noise by the mic from moving or banging on the table.
• Professional Filter - Foam windscreen fit for SM58S, 58S microphones. Pop filter blocks out plosives, pop, breath and wind noise, improve your audio quality.
• Adjustability and Flexibility - Shock mount 180 degree Ajustable can adjust the angle as you like.Comes with a 5/8\" to 3/8\" screw adapter for easy connection to universal microphone boom or stand. e.g. concert to Rode PSA1 mic stand.
• High Quality - Clip on the shock mount can hold a fairly heavy dynamic mic to prevent the microphone from falling. Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.