Testing Equipments By EIE INSTRUMENTS

• Inbuilt graph in the touch screen display.
• The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure
• Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22
• Dual stage pump assuring fast piston approach and precise test execution
• For easy debugging of unexpected malfunctions.

• The mould is split vertically into two parts
• The mean internal diameter is within + 0.2 mm and height is within + 1 mm
• The ends are machined to +0.05
• The base plate and top plate are machined flat to + 0.03 mm

• Compliance Standards IS: 516, IS : 10086.
• Made of Cast Iron, with base plate, the faces are machined flat to ? 0.02mm accuracy and finished to within ? 0.2 mm of specified dimensions.
• The moulds will be stout enough to prevent distortion.
• It will be constructed in such a manner as to facilitate the removal of the molded specimen without damage and will be so machined that, when they are assembled ready for use, the dimensions and internal faces shall be accurate within the specified limits.
• IS:10086. Weight of the mould will be about 13.5 kg. Strictly as per BIS specifications and within required tolerance. Low cost mould without ISI mark but weighing about 12 kg or 9.5 kg or 7.5 kg also available.

• The mini-slump test was used to find the spread of grout mixtures
• Dimensions of mini-slump apparatus 38 mm high with at the top diameters of 57 mm and 19 mm at the bottom.
• In the mini slump test, CBG mix is poured into a cone until it's full.
• Package Includes: 1 Slump Test Apparatus

• Material for construction of moulds is Cast Iron or Mild stee
• Available with base plate
• The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions.
• Precision engineered range of Concrete Cube Mold that is widely used for cement testing purpose.
• This equipment, especially designed and fabricated for testing of the cement is complete hassle free performance.

• The Slurry-Sampler is designed to collect a sample large enough to run the normal specification tests.
• This reliable sampler is important on projects where sand content is tested prior to concrete placement
• The use of a sampler is important for exact depth confirmation of viscosity, specific gravity, pH, and sand content data collection in the drilling fluid.
• Samples are taken to check slurry properties at a marked depth to guide treatment and maintenance of the fluid, and in accordance with applicable specifications.
• Package Includes : Bentonite Slurry Sampler - 50 Mtr.

• As per IS:1199. Consist of Slump Cone, base plate and graduated Tamping rod.
• The apparatus will comprise of a slump cone with handles made of mild steel sheet, a stainless steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle. As per IS:1199 and IS:7320 with test certificate for conformity.
• Mould: The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions Bottom diameter: 20 cm Top diameter: 10cm Height: 30cm
• Tamping Rod: The tamping rod will be of steel, 16 mm in diameter, 60 cm long and rounded at one end.