Industrial & Scientific Store - Abrasive & Finishing Products

• Shank Size: 1/2, 3/4\"
• Min Cutting Diameter: 1/4, 1/2, 1-1/4\"
• Use standard triangle and square inserts
• Positive rake makes for smooth cutting without chatter
• Uses TCMT-32.51 & SCMT-432 inserts

• Function This sink bridge is designed for assist your sharpening lapping work, you can put it on the sink pool to sharpening your knife along with water flushing in the mean while, make your honing work more easily quickly and efficiently.
• Widely Use This sink bridge can be used over your kitchen sink, table top, granite countertop, two extra silicon mats help to prevent slide during the honing work. Center rubber block can firmly hold various stones, eg: wetstone, water stone, oil stone, diamond stone, lapping plate etc.
• Fit Size Fit stones length from 3\" to 11-5/8\" via adjust middle slid blocks. Fit for sink pool inner length from 14-3/8\" to 24\" via adjust the end's flexible slid block.
• Material Durable stainless steel pole in 3/8\" thickness and aluminum metal blocks & screws excellent for anti-rust, center rubber block perfect for anti-slid.
• Dimension Total L x W x H: 16-3/8\" x 4-1/8\" x 2-1/8\". Limited 1-year warranty.

• Many times harder than conventional files
• Cuts 10X faster and in all directions
• Cuts into welds and hardened surfaces where other files can't
• Smooth action
• 12\" overall length with 8\" blade

• [QUALITY]- Proudly Made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options.
• [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use.
• [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish.
• [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle.
• [SILICON CARBIDE ABRASIVE]- Excellent on mild steel, stainless steel, cast iron and other softer ferrous materials.

• Bore Dia. in Shell mill: 1\"
• Gage Length: 1.97\"
• Shell mill pilot T.I.R <0.0002\"
• Made from alloy steel harden to 54-60 HRc
• All critical surface are precision ground

• Coarse and Fine Grinding: The diamond hand polishing pads have Seven grits, electroplated grit and resin grit
• Humanized Design:The radius design of diamond hand pad set and back polishing sponge easy to grab,make more comfortable
• Feature:The diamond hand sanding pad is made of diamond powder,grinding sharp, fast polishing, high brightness
• Application: The diamond sanding pads great work for polishing granite stone marble glass and concrete any where
• Feel Free to Contact Us: IF you have any dissatisfaction after receiving our hand sanding blocks, please feel free to contact us. We will replace it for you immediately, so you can buy with confidence.

• For CNC machines having CAT 40 taper spindles
• Made pf 20CrMnTi alloy steel
• Electrolysis nickel coating
• Balanced to 8,000 RPM
• Tolerance is .0002\" Maximum

• Premium aluminum oxide mineral is durable, cuts fast and performs well on many surfaces
• Strong, C-weight paper backing resists tearing and supports aggressive sanding with extra durability compared to lighter weight paper backings
• Open coat construction and load-resistant coating prevent premature loading of the disc surface to maximize cut and extend abrasive life
• Stikit adhesive backing allows for quick application and easy removal
• Convenient disc roll eliminates disposal of disc liners, increasing productivity

• With anti-sliding handle
• Ideal for tyre change, transmission work, etc.

• FAST CUT: Delivers a 30% faster cut compared to other premium abrasives
• LASTS LONGER: Cubitron II abrasives last at least 30% longer than other premium abrasives se
• LESS PRESSURE REQUIRED: Sharp cutting Precision Shaped Grains produce excellent results with less disc pressure
• EXCELLENT DUST EXTRACTION: Multi-hole pattern helps dust extraction sanders keep the work surface cleaner
• FAST DISC CHANGE-OUTS: 3M Hookit hook-and-loop attachment makes changing discs easy
• VERSATILE: Suitable for primer sanding, scuffing and e-coat sanding
• MULTIPLE GRADES: 3M Cubitron II Hookit Clean Sanding Abrasive Discs are available in grades from 40+ to 400+
• For industrial/occupational use only. Not for consumer sale or use

• SUPERIOR JAPANESE CONSTRUCTION - Built with duration and quality in mind, Tajima's chamfer ensures a prolonged and steady tool-life.
• INNOVATIVE SHUTTLE STRUCTURE - This blade's inventive shuttle structure allows the tool to swing with movement, allowing for greater range of mobility when in use. Diversify your scope of motion and pivot while you file, ensuring the mastery any corner or angle.
• DURABLE CONSTRUCTION - Metered as 20% more effective than traditional rasp files, this tool is built for longevity. Capable of handling even the toughest gypsum board, Tajima's ceramic blade is 10x more durable than similar steel files.
• \"TIGER SUPER HARD\" APPROVED - Tajima's rasp file is capable of filing \"Tiger Super Hard\", Japan's industrial-grade drywall. \"Tiger Super Hard\", measuring 4x harder than typical drywall, satisfyingly disintegrates when filed with the TBY-SH180-T.
• ERGONOMIC GRIP - Manufactured to ease uncomfortable grip and hand-to-wrist tension, this file is drywaller friendly and can be used professionally for hours.

• Quantity: This listing is for a pack of 100 pieces of 6 cutting wheels.
• Dimensions: Each disc is 6 inches in diameter with a 7/8 metal center and 0.045 thickness.
• Application: These cut off wheels are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
• Advantage: Our cutting wheels are made with a proprietary blend of premium abrasive grains. These grains are self-sharpening and provide an aggressive cut.
• Warm Tip: Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

• Original Lessmann item no. : 417872
• Made in Germany
• Round brushes with 6 mm shaft Drm 70 x 12-14 mm sanding bristles SIC K 320/ 0, 60 mm