Abrasive & Finishing Products By WEILER

• FLEXIBLE BRUSING ACTION: Wolverine 3/4\" Crimped Wire End Brush features solid end construction and flexible brushing action
• LONG BRUSH LIFE: Manufactured with the highest quality construction for smooth, efficient performance and long life
• COST-EFFECTIVE: Engineered to provide cost-effective use for less demanding applications
• APPLICATION: 1/4 inch stem diameter for use on die grinder, drill and drill presses.
• SPECIFICATIONS: Wolverine 3/4\" Crimped Wire End Brush, .006\"Stainless Steel Fill, 1/4\" Stem, 7/8\" Trim Length, 2-9/16\" Overall Length, Max RPM 22,000, Made in the USA

• Self-sharpening zirconia alumina grain retains high cutting performance throughout the life of the wheel.
• Ceramic Infused grinding wheels deliver the fastest cutting with the least effort.
• Small 5/8\" 11 nutted metal hub reduces gouging of the workpiece and allows for 30% more usable surface area of the wheel in addition to providing quick spin-on, spin-off changeover of a standard hub.
• Designed with fiberglass cut back from the edge to provide instant aggressive grinding right out of the box.
• Triple fiberglass reinforcement provides added strength for aggressive stock removal. Best for use on steel, structural steel and iron.

• QUALITY: Self-sharpening zirconia alumina (ZA) grains hold up under high temperatures and extreme pressure; Phenolic backing prevents scratching of the workpiece
• APPLICATION: Type 29 design has angled flaps that maximize surface contact for aggressive stock removal on flat surfaces; High Density is ideal for light pressure grinding, blending, and finishing on irregular surfaces
• USE ON RIGHT ANGLE GRINDERS: Fits most standard power angle grinders with 5/8\"-11 UNC thread
• SUPERIOR EDGE GRINDING: Ideal for those who need aggressive stock removal for edge grinding.
• Click on the \"Visit the Weiler Store\" link at the top of this page to see the full line of abrasive products from Weiler

• Aggressive cutting and grinding wheels that will get the job done fast.
• Excellent value for the professional that needs a tough, aggressive wheel.
• Dual reinforcement provides added strength for aggressive cutting.
• Thin cutting wheels deliver accurate, clean cuts.
• Open arbor offers a cost-effective mounting option when using adapting nuts.

• Paired flap design delivers high preformance grinding on aluminum
• White top coated flaps eliminate loading
• Contaminant-Free (Contains less than 0.1% Fe, S, Cl
• 60 grit abrasive grain is best for weld blending, deburing and finishing
• Conical disc shap maximizes surface contact for aggressive stock removal on flat surfaces

• Trim-Kuts are abrasive discs designed for light grinding and blending applications on a variety of materials
• The abrasive grains are fused directly onto a wearable polymer backing, resulting in a disc that requires no back-up pad
• The polymer backing trims during use to expose new grains to the work surface
• 3\" discs are designed for use on right angle air die grinders, and 4-1/2\" discs are for use on right angle grinders
• Do not use TRIM-KUT discs in temperatures lower than 48? Fahrenheit; Store at 50% relative humidity

• MADE IN THE USA: Weiler Power Cup Bushes are proudly made in the USA at our factory in Cresco, PA
• ROBUST CONSTRUCTION: Constructed with an internal steel ring to retain the fill material and ensure equal spacing around the perimeter to minimize vibration and extend life
• INDUSTRIAL GRADE CARBON STEEL WIRE FILL: Featuring heat treated, high tensile steel wire that has been drawn to the most exacting industry standards for superior fatigue resistance and brushing action
• IDEAL FOR FLEXIBLE CLEANING APPLICATIONS ON LARGE SURFACES: Demanding light to medium duty cleaning including corrosion/oxide removal, rust/paint removal, light deburring. Will not remove base material
• USE ON RIGHT ANGLE GRINDERS: Fits most standard power angle grinders with 5/8\"-11 UNC thread

• Trim-Cuts are abrasive discs designed for light grinding and blending applications on a variety of materials
• The abrasive grains are fused directly onto a wearable polymer backing, resulting in a disc that requires no back-up pad
• The polymer backing trims during use to expose new grains to the work surface
• 3\" discs are designed for use on right angle air die grinders, and 4-1/2\" discs are for use on right angle grinders
• Do not use TRIM-KUT discs in temperatures lower than 48? Fahrenheit; Store at 50% relative humidity

• Industry-First X3 Technology combines an advanced grain anchoring system, dual flap design and engineered backing that delivers faster grinding AND longer disc life for increase productivity

• Small size allows access to confined areas
• Used on right angle air die grinders for smooth grinding and enhanced conformability
• Type S Mount
• 3\" BobCat Mini
• Plastic Backing Plate Material

• Lasts longer and maintains perfect cutting angle to provide excellent performance and sustained stock removal when grinding on edge
• Superior grain retention

• Desired Finish - CrossFlex offers a wide range of grits and sizes allowing machinists to achieve the desired finish
• Heavy Burr Removal - Increased brush to part contact ensures that the heaviest burrs will be removed, outperforming standard nylon tube brushes
• Long Life - CrossFlex brushes have a long operational life, lowering total cost of use compared to other brush options
• Flexible Nylon Stems - Distribute pressure evenly and self centers within the part to create an ideal hone.
• Consistent Cross Hatch Pattern - Helps to seat piston rings and retains oil for lubrication in a combustion cylinder.