Filtration By pentek

• KEEP YOUR WATER CLEAN and protect your appliances by removing dirt, sand, silt and particulates
• FITS ALL 20\" Big Blue or other heavy duty housings and can replace any 20\" x 4.5\" sediment filter cartridge
• ACHIEVES UP TO 3X the dirt holding capacity of similar size sediment cartridges
• NSF CERTIFIED for your peace of mind
• REPLACE EVERY 6 MONTHS or when you notice a drop in water pressure or quality

• Nominal filtration rating of 30 microns
• Non-woven polyester media pleated around a polypropylene core for strength
• Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
• Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)

• OPAQUE SUMP MANUFACTURED with reinforced polypropylene offers excellent chemical resistance and is ideal for many residential, commercial and industrial applications
• FITS ALL 10\" x 2.5\" standard replacement filter cartridges
• DESIGNED WITH buttress threads and uniform walls for easier cartridge change and improved strength
• PRESSURE RELIEF BUTTON ON CAP for easy cartridge changes
• 3/4\" NPT INLET AND OUTLET PORT on reinforced polypropylene cap

• 2.5X9-3/4 radial-flow granular activated carbon 25 micron

• CFB-Plus series products are modified molded blocks manufactured using our proprietary fibredyne technology
• The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge

• PROVIDES SUPERIOR sediment filtration and chlorine taste and odor reduction
• FITS ALL 10\" Housing and can replace any 10\" x 2.5\" carbon filter
• SUITABLE FOR MUNICIPAL AND NON CHLORINATED WATER APPLICATIONS unlike cellulose cartridges
• HIGH DIRT LOADING CAPACITY WITH MINIMAL PRESSURE DROP due to the pleated design
• COMBINATION OF PLEATED POLYESTER MEDIA AND CARBON FILTRATION produces extended service life

• Slim filter housing for low-flow applications with space restrictions
• Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
• Holds a 10\" x 2-1/2\" sediment or carbon filter cartridge (sold separately)
• Pressure relief button for easier cartridge replacement
• Initial pressure drop of 2 psi at a flow rate of 5 gpm

• SLIM DESIGN REDUCES SPACE REQUIRED for installation without sacrificing capacity
• FITS ALL 10\" x 2.5\" standard replacement filter cartridges
• OPAQUE SUMP HOUSING molded from rugged reinforced polypropylene offers outstanding chemical compatibility
• PRESSURE RELIEF BUTTON for easy cartridge replacement
• TESTED AND CERTIFIED by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements

• Nominal filtration rating of 0.5 micron and 99.95% reduction of cysts
• Bonded PAC filter media wrapped in a polyolefin pre-filter
• Built-in flow restrictor (0.6 gpm) ensures sufficient contact time with media
• Temperature range of 40 to 165 degrees F (4.4 to 74 degrees C)

• GREATLY IMPROVES TASTE by filtering up to 3 PPM of dissolved iron. Eliminate metallic taste
• PREVENT RUST STAINS on sinks, toilets and plumbing fixtures and prevent appliance damage
• WHOLE HOUSE FILTERING on main water line, works great for well water
• FITS ALL 20\" Big Blue or other heavy duty housings and can replace any 4.5\" x 20\" Iron reducing filter
• REPLACE EVERY 3 MONTHS for 3PPM reduction with a family of four

• PROVIDES SUPERIOR sediment filtration and chlorine taste and odor reduction
• FITS ALL 20\" Big Blue housings or other 20\" heavy duty housings and can replace any 20\" x 4.5\" carbon filter
• SUITABLE FOR MUNICIPAL AND NON CHLORINATED WATER APPLICATIONS unlike cellulose cartridges
• HIGH DIRT LOADING CAPACITY WITH MINIMAL PRESSURE DROP due to the pleated design
• COMBINATION OF PLEATED POLYESTER MEDIA AND CARBON FILTRATION produces extended service life