Industrial & Scientific Store - Hydraulics, Pneumatics & Plumbing

• Genuine Oetiker Clamps
• Two ears for nearly double the clamping range of one-ear clamps
• Applies uniform force for secure clamping
• Accommodates thermal and vibrational expansion for a surer hold than other clamp types
• Please note - the size of the clamp denotes the Inner Dimension (ID) of the clamp.

• Sterling Seal & Supply, Pure Teflon O-Rings are highly resistant to extreme chemical attacks and have a high resistance to the degrading effects of exposure to such solvents as acetone, MEK, and xylene
• Temperature Range: -300 degree to +450 degreeF. Hardness (Shore A): 98, high resistance to ozone
• Sterling Seal & Supply TFE O Rings possess average elastomer characteristics of 2,500 to 3,500 psi tensile strength, and 300% elongation, they are tough, impact resistant, low friction, non-twisting performers over an extremely wide temperature range
• Special care must be taken during handling and installation of PTFE seal. They wont stretch fit as traditional elastomeric O Rings
• Because of its poor tear resistance, during O-ring installation particular care should be taken to avoid nicking or scratching Teflon, as imperfections will cause O-ring leakage

• Outer Diameter - 1/4 inch and Wall Thickness - 21 swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed
• Bright Annealed Finish and Inside Carbon free

• Outer Diameter - 3/8 inch and Wall Thickness - 21 swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed
• Bright Annealed Finish and Inside Carbon free

• Inner Diameter - 1 inch and Wall Thickness - 18 swg
• Copper UBend
• Pack of 1

• Outer Diameter - 5/8 inch and Wall Thickness - 18(L) swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed
• Bright Annealed Finish and Inside Carbon free

• Outer Diameter - 1/4 inch and Wall Thickness - 25 swg & 0.5mm Blue PVC Coating
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Copper pipe Standards - JIS H3300 / ASTM B68. Copper >99%
• Temper : Soft Annealed

• Outer Diameter - 1/4 inch and Wall Thickness - 18(L) swg & 0.5mm Blue PVC Coating
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Copper pipe Standards - JIS H3300 / ASTM B68. Copper >99%
• Temper : Soft Annealed

• 1mm Blue PVC Coated Copper tube with Outer Diameter - 3/8 inch, Wall Thickness - 21 swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed. Please note that PVC coated tube ends might be uneven or rough.
• PVC coating on copper tubes protects the tube against aggressive environment, harsh conditions, accidental damages, and abrasion by providing extra resistance to the tube. It also helps reduce heat loss and prevents corrosion which increases the life span of tubes. It is available in various colors which is helpful in service type identification according to different applications of water and gas services or any other general usage for safety or aesthetic reasons.

• 1:Easy to carry
• 2:Suit Komatsu Hitachi excavator
• 3:Easy to USE
• 4:Max working pressure: 10000PSI/700BAR

• Material: Silicone; Colour: Blue
• Size (L x W x H): 10 cm x 20 cm x 15 cm
• Flow Rate: 1 liter/hour
• Variable Power Supply: 90 - 260 V
• Pump Head Operating Pressure: 3 bars

• Silicon Tubing
• Flexible
• Air Transfer
• Heat Resistant

• 3/4\" nptf, 20 gallons per minute
• Can be shifted under full line pressure
• Designed with a hydraulically balanced spool that allows them to be shifted under full line pressure
• System pressure is bled off to a low pressure leg before reaching the seal, resulting in a reduced effort required to shift the spool

• Pre-cut flexible silicone tubing. High quality, flexible silicone compound in compliance with FDA and 3A Sanitary Standards. USDA approved for meat and poultry plants.
• This extremely flexible, food grade silicone is suited for general low pressure industrial applications for the conveyance of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines.
• Its many suitable uses include pumps, shiphons, filters, AC and HVAC tubing, drain valve connections, filters, plumbing, drip irrigation, ponds and gardens, beer brewing, wine making, and more.
• Lightweight, flexible, and crystal-clear, tubing provides excellent solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning.
• Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money. For your industrial, chemical, and agricultural supplies. Also available in 3.3 feet.

• Air Transfer
• Silicon Transparent
• Flexible
• Heat Resistant
• Water Proof

• Country of Manufacture: CHINA; Material: Silicone; Net Weight: 145g
• Package Content: 1 x Silicone Tube; Main Color: Translucent; Product Name: Silicone Tube
• Size: 20 x 25mm/0.8\"x1\"(ID*OD); Tube Length: 50cm/1.6Ft; Hardness: 65 Degree
• Maximum Temperature: 200C(392F); Minimum Temperature: -60C(-76F)
• Internal Diameter: 20mm/0.8\"; Outer Diameter: 25mm/1