Industrial & Scientific Store - Hydraulics, Pneumatics & Plumbing

• Shape: Hex Nipple (Male x Male)
• Connection:NPT-NPT.Measurement: 1-1/2\".Length:53mm
• Material: 304 Stainless steel
• Other size is available too,please check it in our store
• Package Include:1 piece x1-1/2\" Male x 1-1/2\" Male Hex Nipple Stainless Steel 304 Threaded Pipe Fitting NPT

• Shape: Reducer Bushing (Male x Female)
• Connection:NPT-NPT.Measurement: 1\"x 3/4\"
• Material: 304 Stainless steel
• Other size is available too,please check it in our store
• Package Include:1 piece x 1\" Male x 3/4\" Female Thread Reducer Bushing Pipe Fitting SS 304 NPT NEW

• O-Ring Cord made of silicone for use with a variety of chemicals and fluids
• Durometer (hardness) of 70A
• For use across a wide temperature range from -76 degrees F (-60 degrees C) to 437 degrees F (225 degrees C)
• Made in the U.S.A.
• Available in various cross sections and lengths

• O-Ring Cord made of Buna-N (Nitrile, NBR) for use with a variety of fluids and hydrocarbons
• Durometer (hardness) of 70A
• For use across a wide temperature range from -40 degrees F (-40 degrees C) to 212 degrees F (100 degrees C)
• Made in the U.S.A.
• Available in various cross sections and lengths

• Product Name : JST XH Male Connector;Material : Plastic, Metal
• Rated Value : AC 220V, 3A;Pin Number : 2
• Pitch : 2.54mm / 0.1\";Total Size : 10 x 0.8 x 0.6mm/0.4\" x 0.31\" x 0.24\" (L*W*H)
• Color : White, Silver Tone;Weight : 17g
• Package Content : 120pcs(+/-2%) x JST XH Male Connector

• BALL VALVE TURIA SERIES 1/2\" X 1/2 \"
• Drinking water networks
• Water supply connection
• Plumbing networks.
• Hot water networks
• Heating systems.
• Compressed air networks
• Pneumatic applications

• AS568A Dash No. (12) Each of 905 to 910, (10) Each of 901 to 904, 911 to 914, 916, 918, 920, 924, 928, 932
• Made of Buna Nitrile Durometer 90 Shore A
• High quality meet / exceeds SAE J200, ASTM D2000
• -30 degree to 250 degree F temperature range
• Boss tube fitting application

• Light Weight,Easy Install and unload
• Applications: Apply to Reverse Osmosis Water System and Housing In Line Filters ETC
• Tube O.D.:3/8\"
• Female Thread Size: 3/4\" /24?0.5mm

• Genuine Oetiker Clamps
• 360 degree Stepless Design - no steps or gaps on inner circumference
• Narrow band, concentrated seal compression
• Specially formed strip edges reduce the risk of damage to the part being clamped
• Please note - the size of the clamp denotes the Inner Dimension (ID) of the clamp.

• Genuine Oetiker Clamps
• 360 degree Stepless Design - no steps or gaps on inner circumference
• Narrow band, concentrated seal compression
• Specially formed strip edges reduce the risk of damage to the part being clamped
• Please note - the size of the clamp denotes the Inner Dimension (ID) of the clamp.

• Red extruded vacuum tubing
• Flexible, smooth walled tubing
• High quality gum rubber
• Measures 1-1/2\" OD by 3/4\" ID by 3/8\" wall thick by 10' length

• INSTALLS IN SECONDS: No soldering or glue; Just crimp to create a watertight seal
• ASSURANCE: Copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge
• QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
• USE: Use with SharkBite PEX pipe tubing, PEX Crimp Tool and barb fittings
• RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications

• Spearit 30 ft: 5/16in od 3/16in id black latex rubber tubing one continuous piece (select length) (#604)
• You have selected - color: black, length: 30 feet
• Imported from usa
• Package inludes 1 piece

• Spearit 20 ft: 5/16in od 3/16in id black latex rubber tubing one continuous piece (select length) (#604)
• You have selected - color: black, length: 20 feet
• Imported from usa
• Package inludes 1 piece

• Barb system offers lowest material cost
• Resists corrosion and scale build up
• No waiting for glue to dry or joints to cool

• Product Name: Pneumatic Cylinder; Model: MAL 20 x 50; Action Type: Double Acting
• Rod Type: Single Rod; Fluid: Air; Power: Pneumatic; Bore: 20mm; Stroke: 50mm
• Max.Press: 0.7MPa; Screw Hole Dia: 8.3mm (Approx.); Thread Rod Dia: 8mm (Approx.)
• Size: 18 x 3cm/ 7\" x 1.2\" (L*D); Material: Stainless Steel
• Net Weight: 222g; Package Content: 1 x Pneumatic Cylinder