Hydraulics, Pneumatics & Plumbing By Raja Rubbers

• 1/4' INCH FRL industrial use , Connection Size is 1/4\" Quarter Inch BSP (Female) Thread
• FRL is comprised of three primary components:
• pressure regulator, air regulator, air compressor regulator,
• You will need 1/4\" inch threaded male connector for fitting the pipes
• Applicable Temperature: 5-50 degreeC Light Weight / Compact Size / Back Mounting / Plastic or Metal or No Casing (As Per Variation)

• Solenoid valve - Ac coil 220v or dc 24v coil or dc 12v Customer care - 9767029601
• 2.Service - Air, Gas, Liquid, and Vacuum CAUTION: Do not energize the solenoid coil when it is not installed onto the valve. It may cause it to overheat and create a fire hazard.
• 3.SERVICE LIFE: The service life of the solenoid valve depends on the operating conditions such as pressure, temperature, type of medium and the voltage.
• 4.ALL Standard valves are supplied with CONTINUOUS DUTY COILS of the proper class of insulation for the service indicated on the valve.
• 5.All parts of the solenoid actuator which come into contact with the fluid are made of austenitic corrosion-resistant steel. In this way, resistance is guaranteed against corrosive attack by neutral or mildly aggressive media.

• Working Medium- Air, Water, Oil, Gas
• Operating Type: Directly driven State: Normally closed
• Flow bore: 16mm CV: 4.8 Pipe Size: 1/2\"
• Operating Viscosity: Under 20CST Operating Pressure: 0-10 Kg/cm?
• Working Temperature: -5~80?Voltage: DC 12V, ?10% Valve Body: Brass