Industrial & Scientific Store - Power & Hand Tools

• Low noise sander: MAXXT eccentric sander with 350W brushless EC motor delivers stable speed, low noise, low maintenance and high efficiency. The light weight of the machine and the minimum noise emission allow flexible and little tiring working
• Low vibration for comfortable working in continuous use. The vibration-optimised eccentric drive guarantees low vibration during operation and therefore comfortable working
• Ergonomic DesignThe symmetrical design of the 15.2 cm orbital sander is suitable for both right- and left-handed users. This sander is perfectly built for manual operation to reduce fatigue when sanding overhead and good feeling on the edges, as well as comfortable operation in any position. Built-in overload protection ensures extra safety
• High efficiency: Unique brushless motor for maximum abrasive efficiency, even with continuous use. EC technology results in a longer service life. For optimal smooth operation at speeds up to 10,000 rpm
• Easy to clean: the multiple pad holder guarantees effective removal of abrasive dust in combination with an industrial vacuum cleaner. Since no carbon brushes are used, the grinder also requires much less maintenance

• ParameterRated voltage: 12 V, Rated power: 12 W, Fan air volume: 135 m?/h, Fan pressure: 430 Pa, Fan speed: 5400 r/min, Fan noise: 42 db, Interface flange: 50 mm, Number of filter elements: 3 layers of purification
• 3 Stage Filtration SystemCotton filter, central high efficiency filter and activated carbon filter an purify a large number of fine metal particles suspended in the air that are harmful to the human body
• Air Volume RegulationAccording to the actual work needs, through the knob to adjust the air volume. Equipped with foot switches to help you work more efficiently
• Low-noiseWith no more than 42db noise rate, it ensures a quiet and comfortable working environment. The pure copper motor has low energy consumption, safety and stability
• Easy to Use1.4 meters long suction arm, can be bent at any angle, durable, no deformation. With 4 universal casters with locks, easy to move, locked and fixed during use, and the machine does not shake

• PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1"-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case
• Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs
• Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
• Application: This CKS375 3-3/4\"\" Wood Lathe Chuck Set includes a 5-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects.
• LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer.

• Double-Sealed Motor: Lubrication-free air motor reduces vibration
• AIRCAT Technology: Patented \"anti vibration\" motor design reduces vibration level to 0.8m/sec2
• Advanced Silencing System: Reduces sander noise level to 80 dBA; 10,000 RPM
• Planetary Motion Sander: Ergonomic throttle lever design for unmatched comfort
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools

• HIGH QUALITY CAST STEEL-ROBUST AND DURABLE: Heavy duty vice is made of high-strength cast steel, chrome-plated spindle, which works smoothly and can stand high clamping pressure without breaking. The surface is sprayed to enhance corrosion-resistance and to make it more smooth bench vise boasts a polished flat anvil?convenient for you to use to straighten nails, metal, and any small accessories that need to be knocked.
• UPGRADED 2-IN-1 DESIGN - DUAL INSTALLATION OPTION : In addition to the option of permanently bolting it down , you can also choose to use the clamp base to easily clamp the vise onto the workbench or table. While marveling at the powerful clamping force of the jaw grip, you will find: clamp on portable vise - solves a nagging problem on jobsites and portable work tables ! ! Yyou can carry it right to the spot where you really need a vise !!
• PIPE JAWS AND FLAT JAWS: Serrated pipe jaws and general flat jaws are made of high-quality hardened steel, hardened and hammered to increase its hardness and strength, which provides long-lasting durability and Reliable and powerful grip. The combination of the two can be easily held circular pieces, such as tubes and pipes, widely applied to woodworking, metal working, cutting conduit, drilling, gluing, sanding, planning, sawing and soon.
• 270 ROTATION: Built with a 270 swivel base, this work bench vise is perfect for use with a variety of clamping angles for versatility. Even if you are left-handed, you can rotate the vise to the position that fits for your work.
• UNIVERSAL TABLE VISE : Net weight is 17 pounds. Maximum opening of jaw is up to 4.3 inches, jaw width is 6 inches?The recommended working maximum clamping force is 3300 lbs?,and throat depth of 2.2 inches. Clamping range of base is 2.1 inches (53 mm) , suitable for workbenches of various thicknesses, which is designed for home, workshop, professional use, general purpose and Heavy work.
• TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution.

• High voltage ratchet wrench
• Cementex double insulated tools are tested to 10,000 and rated for 1,000 when working on live parts
• For use with 3/8-Inch drive sockets
• This insulated ratchet wrench is reversible, has a lever control and features an audible click and feel impulse
• 7-1/4-Inch in length and is high visibility orange in color

• Powerful 15 AMP motor delivers 4,300 RPM with power to cut beams, engineered lumber, and timberWell balanced and weighing only 15.2 lbs.
• for increased operator comfortAuxiliary front and top handles are positioned for comfort and control,
• Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts.
• Large cutting capacity (3-13/16\" at 90 and 2-11/16\" at 45 ),
• Precision gearing with ball and needle bearing construction for smooth and efficient power transmission.Bevel cuts up to 50 , Magnesium die cast blade case and blade guard, and aluminum base for durability.

• The Magnetic Lifter is made with super strong neodymium magnets.
• Easy to Use Handle to Switch Magnet Force ON or OFF.
• Large U-loop shackle hook allows easy attachment of slings.
• The magnetic lifter is used for lifting Steel Sheet, Block, Rod and other Magnetic Material.

• Made of high quality semi-steel.
• Hardened and ground.
• Lathe chuck wrench is supplied with the chuck.
• 2 Sets of hard jaws, both internal and external, are included.
• Center hole is .630\".

• New in Box
• 100% Brand New
• Good Quality Durable and Eco Friendly Material.
• Package Contain Pack Of 1 Item.
• In case of any query please contact seller.

• This machine is used to cut the image to round shape for 37mm size botton badge making
• Tools to make the badge of 37mm in diameter. The actural cutting size is a little bigger than 37mm in diameter.
• Manual operated. Easy to use.
• Suitable for 300g paper cutting.

• FC650D plasma cutter

• Durable