Industrial & Scientific Store - Power & Hand Tools

• OPTIMAL PERFORMANCEPowerful air driven motors for smoother runs and less vibrations providing swirl-free finishes. Designed with ergonomic wrist support.
• TECHINAL SPECIFICATIONS 5mm Diameter Orbit, 80 dB(A) Noise Level, 11,000 RPM Rotation Speed, 1/4 inch Air Inlet. Comes with vacuum hose and dust bag.
• PRECISED SANDINGWeighing only 1.8lbs, our sanders are constructed using lightweight and durable composite housing to absorb vibration and prevents cracked housing. Designed to be low profile for precise sanding performance and high maneuverability. Suits sandpaper with Grit Number #80 to #1500.
• NON-LUBRICATION MOTORPatented double sealed, lubrication-free air motor provides oil-free use.
• LONGER LIFESPANKevlar motor blades increases lifespan by 50%.
• QUALITY GUARANTEEDProduced and tested in Taiwan, where its being widely recognized for its dedication in producing premium quality tools, this tool meets and even exceeds ANSI/ASME specifications, and is definitely one of the essentials in your garage, workshop and home. Our customers trust our tools to be of quality ones.

• Simple Operation: The converter is designed with user friendly keyboard, equipped with digital display screen, easy and convenient for operation.
• Flame Retardant ABS Housing: The housing is using industrial grade ABS plastic, has high impact and heat resistance, good flame retardant and comprehensive performance.
• Full SMD Design: All internal components adopt SMD design, greatly increases the stability of the machine, provide excellent performance.
• High End Motherboard: The inverter adopts high end motherboard, intelligent and practical, has strong protection and complete functions.
• Good Heat Dissipation: Built in large heat sink, which is about 3 times larger than which of similar products, with small fan which has low noise when running, and assisting good heat dissipation.

• High Leverage Flush Cut for Plastic and Soft Metal

• 2504-20: 1/2 in. all metal chuck for maximum grip and bit retention
• 2504-20: E-clutch for consistent repeatability in driving applications
• 2504-20: 1700 RPMs for faster drilling speeds
• The Milwaukee 48-11-2420 M12 REDLITHIUM CP2.0 Battery delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries.
• 48-11-2420: REDLINK intelligence: provides optimized performance and overload protection using total system communication between tool, battery and charger

• Variable speed provides 5 speed setting between 3,500 RPM and 8,500 RPM for greater control.
• Brake stops most wheels in less than 2 seconds.
• Slide Switch Designed to Reduce User Fatigue
• Tool-Free Guard Adjustment for faster guard installations and adjustments
• Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology

• Excellent anti-slip function with rubber-coated handle
• Copper content 99%

• High grade malleable casting
• Hardened alloy steel rollers
• Wheels align for fast and clean cuts
• Enamel finish for durability
• Pipe diameter capacity from 1" to 3"

• Most Versatile Add-On Fence: XT XTENDER 36" Fence stands 5" tall, includes three T-slots along the top for feed control accessories, milled clamp attach slots for multi-position set up, special slot to add BOW Feed Supports accessory, and a slot for attaching to Delta UniFence and Harvey fences. Robust Aluminum extrusion with anodized finish and 3 sizes for all your needs. Use with XT Feed Supports to extend smaller tabletops and improve stability, cut quality, feed control and safety.
• Extend Fence and Table Surface: XT XTENDER Fence works in tandem with optional XT Feed Support Accessory. Bow Feed Supports attach to the Fence and function as a shelf extending the table surface for infeed and/or outfeed. Transform the smaller tabletops by extending feed support and control over a wider area. The 36" XTENDER Fence is perfect for extending small Portable jobsite saws, benchtop saws or bandsaws. Improves safety as wood is easier to control and kept square to the blade.
• Fast Set Up: XTENDER Fence attaches and detaches from your existing fence in seconds with T-Track Clamps (Required; Sold Separately. Part # XT2). Bow XT T-Track clamps are designed to fit most portable saws, bench top saws, bandsaw, and full cabinet saw fences. Fast Set up ensures convenience to use XTENDER when you need it. Includes special Slot for Delta UniFence and Harvey Fences for quick attach as well. (See kits below)
• Multi-Position Fence Placement: Milled Clamp Slots are located on the back of the XTENDER Fence and offer multiple positioning options in relation to your Saws fence. Ideal when using a fence longer than your table surface and paired with Bow Feed Support accessory (Part# XT1). Position XT XTENDER Fence forward for greater infeed control; position back for outfeed control; or center placement for infeed and outfeed control. Slots accept Bow XT T-Track Clamps.
• Add Bow Safety Accessories: Take full advantage of the Bow XTENDER Fence System. Three T-Slots on the face, Top and Back of the fence enable adding woodworking accessories like Bow FencePRO Featherboards, stops, etc. T-slots run the length of the fence and accept 5/16" or 1/4\" T-bolts. Check out the kit options and make your saw safer with better control, better cuts and added stability when cutting longer boards. View our available bundles below.

• Double faced sledge / lump hammer
• Suitable for building, automotive, construction, wrecking
• Striking surfaces are precision ground and heat treated
• TPR handles for comfort and grip when
• Total head weight 14lb / 6.4KG

• SUPERTORQUE lobular openings for greater turning power without deforming the fastener
• Designed for maximum engagement on 6 or 12 point fasteners
• Suitable for use with pneumatic and electric impact wrenches
• Specially heat treated for impact use to provide long life, safety, and durability

• Strong Heavy duty construction The welding cart is constructed of high-quality metal, surface is coated with an anti-rust and wear-resistant satin black coating, which is composed of cold-rolled sheet, which can be used for many years. with 0.5\" thickness Combined, the three-layer board, welding cart it is able to bear 220 lbs. of weight and you can use it for a long time
• Welding cart with drawersFeatures 4 locked drawers that provide you with ample space for storing your tools to be organized. The tilted top shelf provides easier access to welder controls and a spacious rear shelf with 2 safety chains to secure the gas cylinder and other tools, welding cart heavy duty ensuring a tidy workspace.
• 360 Swivel CastersEquipped with 2 heavy-duty 8-inch solid wheels, it can move stably, especially when it is loaded with heavy objects; The welding carts 2 3-inch front swivel casters for 360-degree maneuverability makes the use of this welder cart easier and more stable, allowing you to move the product in any environment without wobble or noise.
• Sturdy Construction & Easy AssemblyCrafted from sturdy steel, the heavy duty welding cart is resistant to wear and deformation, ensuring smooth movement even under heavy use. This rolling welding cart can be easily installed according to the given manual and all the accessory packages are neatly classified.
• Efficient and Practical toolOcforiya Welding cart boasts 270LBS max static capacity and 220LBS dynamic capacity. It's perfect for transporting and storing most MIG, ARC welding machines, and plasma cutters, as well as plenty of room for hoses, welder's helmet, and welding accessories. Welding cart with drawers is ideal for various welding activities, including manual welding, gas shielded welding, and argon arc welding for use in home garage, workshop, repair shop and other places

• model# 674
• Includes sharpening stone
• Easily transportable
• Movable fence
• Designed for long wear