Power & Hand Tools By TL PATHAK GROUP

• This machine is small_Lathe. You can use this machine in a small industry, an orthopedic hospital, in the laboratory of the forging plant and in your garage.
• We have given a gearbox in this machine, it has 2 levers. In this machine, we have also given auto_speed and its spindle torque is also very much. In this machine, you have 9 types of feed and you can drop 9 types of threads, and if you use to change gear in it, you can feed more and you can drop more threads.
• The headstock is very important in this machine. The headstock has 8 kinds of speed, but if you want more speed, then we have given a pulley of 2 steps in this machine so that you can get more speed. In this machine, you can work up to 2500 rpm and a minimum of 50 rpm.

• Model-PHDP200,Welding Range(in mm)-50,63,75,90,110,125,140,160,200,
• Working Volatge-220 V 50 HZ,Heating Plate Power-1.80 K.W.,Planning Tool Power-1.10 Kw,Total Power-3.65 Kw,Weight-135 Kg,Volume-0.53 M3.

• Model-PSW 10,KVA Rating @50% Duty Cycle(KVA)-10,Input Supply(Volts)-230/440,Phase-1/2,Insulation Class-A(cu),Nomination Throat Clearence(mm)-230,

• Model -Mini Wood Lathe Without VFD Model ,Motor (W) -550, Spindle Speed (RPM) - 650-1450/1250-2800/1600-3800,Swing Over Bed (m/s) - 305, Distance Between Centers - 457, Drive Spindle - 1x8RH Thread or Other

• Model -Mini Wood Lathe With VFD Model ,Motor (W) -550, Spindle Speed (RPM) - 650-1450/1250-2800/1600-3800,Swing Over Bed (m/s) - 305, Distance Between Centers - 457, Drive Spindle - 1x8RH Thread or Other,Head and Tailstock Taper - 2 morse or other

• Model-PS 20,Titling Working Table-Fixed,Drilling Capacity-20 mm,Pillar Diameter-74.30 mm,Spindle Nose to Table Distance-660 mm,Distance From Spindle Nose to Base-900 mm,Distance From Spindle Center to Pillar Surface-200 mm,
• Table level-200 mm,Taper in Spindle-MT-2,Number of Speed-8 Speed,Range of Speed(RPM)-87 to 3324,Table Size(in mm)-260x260,Base Size(m/c area in mm)-480x300,Overall Base Size(in mm)-490x310,
• Pillar Length-1170 mm,Overall Height with Pulley Guard-1420 mm,V-Belt Section- A-42,Weight(Approx)-100 Kg,Motor 1440 RPM 3 Phase 440 Volts-1 H.P.,Shipping Wooden Case-660x380,Inner Size(LxWXH)-1400 mm.

• Wire Stripping Machine (0.5 mm to 40 mm) Voltage- 220V 50Hz,Power-0.37 KW/0.5 HP,Speed- 20 m/minute,Range of Wires-0.06"-1.5"/1.5 mm-38 mm,Number of Blades-10,Number of Holes-11,Usage-Striptease,Thread Material-Vehicle Line,Communication Cable and Multicipline,Packing Size-65x32x42 cm.