Robotics By Robodo

• All-in-One Design
• Advanced attitude stabilize Algorithm
• Multiple flight control mode/intelligent switching
• GPS Module Available/Accurate Position hold
• Low voltage protection

• All-in-One Design
• Advanced attitude stabilize Algorithm
• Multiple flight control mode/intelligent switching
• GPS Module Available/Accurate Position hold
• Low voltage protection

• Pin out for 14 digital input/output pins
• Pin out for 6 pwm outputs
• Pin out for 8 analog inputs

• This is a bh1750 light intensity sensor breakout board with a 16 bit ad converter built-in which can directly output a digital signal
• When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter, their light intensity is 1lx
• Sensor built 16bitad converter

• Standard Attachments Included
• Operating Speed : 0.13sec / 60 degrees (6v no load)
• Stall Torque : 15 kg-cm at 6V

• Output voltage: ac 24-380v
• Output current: 25a
• Input voltage: dc 3-32v
• Control method: dc to ac
• Size: 6. 5Cm x 4. 5Cm x 2. 2Cm - 2. 56Inch x 1. 77Inch x 0. 87Inch

• Specially designed for Robotic applications
• RPM - 200, Stall Torque 12 kgcm
• No-load current = 800 mA(Max), Load current = 9 A(Max)

• Driver IC: MAX7219
• Input Voltage (V): 5
• Max. Operating Current (mA): 320
• LED Color: Red
• LED Display Dim. (mm): 32x32x6 (LxWxH)

• Connector: DuPont 8 pins, 0.1 Inch (2.54mm) pitch
• Peel off the white sticker on the back of the keyboard, can be securely affixed to the surface of the chassis
• Operation temperature: 20 to plus 40 degree Celsius
• Life expectancy: 1 million closures

• Full (stall) load torque: 30 kgcm

• The breadboard sticks on the prototype shield with its self-adhesive backing
• 5v, gnd and raw pins are exposed as well
• Mini breadboard size: 4.4 x 3.4 x 1cm

• This is a 16x2 lcd keypad module for arduino diecimila duemilanove, uno, mega1280 and mega2560 board
• Blue backlight with white words and adjustable backlighting
• 4 bit arduino lcd library

• Operating voltage: Dc3-5v
• Operating current: Less than 20ma
• Sensor type: Analog
• Detection area: 40mmx16mm
• Operating temperature: 10-30??

• Input Voltage: 230V AC
• Output Voltage: 12V, 12V or 0V
• Output Current: 1 Amp
• The transformer has cores made of high permeability silicon steel.
• Soft Iron Core.

• Rated voltage (v) - 66, Current/ phase (a) - 1, resistance/ phase (ohms) - 6.6
• Holding torque (kg-cm) - 7.2
• NoOf leads - 6
• Step angle - 18 degree
• Frame size (mm) - 57x57, shaft length (mm) - 20.6