Tapes, Adhesives & Sealers By Loctite

• High Strength Retainer: Designed for the bonding of cylindrical metal fitting parts. Prevents loosening and leakage due to shock and vibration. High viscosity retainer.
• Typical Applications: Locating pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions. Particularly suitable for applications where temperature resistance up to 200 degreeC is required.
• Cure Type: Anaerobic | Cure Time (Setup/Full Strength): 30 min/24 hr
• Shear Strength: 2495 psi
• Gap Fill: Up to 0.15 mm

• Low viscosity instant adhesive ideal for quick bonding of plastics and rubbers. Can be used on difficult on bond plastics.
• Typical applications: Rapid bonding of plastic & rubber, including EPDM. Makes O-Rings Instantly.
• Wicking viscosity for Tight Bond Lines
• Fixture time: 15 seconds | Gap fill: 0.1 mm

• General Purpose Universal instant adhesive - Offers very high strength on close-fitting parts
• Typical applications include boding of wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics, as well as most plastics)
• Perfect for all quick repairs and all types of small emergency repairs
• Fixture time: 5-20 seconds | Gap fill: 0.15 mm

• Low viscosity instant adhesive ideal for quick bonding of plastics and rubbers. Can be used on difficult on bond plastics.
• Typical applications: Rapid bonding of plastic & rubber, including EPDM. Makes O-Rings Instantly.
• Wicking viscosity for Tight Bond Lines
• Fixture time: 15 seconds | Gap fill: 0.1 mm

• Service temperature range: -60 degreeC - +200 degreeC; Tensile shear strength: 1.2N/mm?
• Max. gap: 1mm; Skin over time: 40 min; Cure through volume in 24 h: 2.75 mm
• Strength: Low; Cure method: Moisture (Silicone)
• Prevents corrosion

• Medium Strenght Anaerobic Gasket - Designed for machined, rigid metal flanges
• Typical Applications: Form-in-place gasket for pumps, thermostats, compressors, transmission housings and axle covers.
• Cure Type: Anaerobic | Cure Time: 24 Hours
• Flexes with flanges that move in service
• Eliminates requirement of pre-formed, pre-cut, paper, rubber and cork gaskets

• General-purpose, clear, ethyl-grade instant adhesive that provides excellent bond strengths on many materials including plastics1, elastomers, metals and composites
• Available in low and medium viscosity, as well as a gel formula
• Versatile instant adhesive can be used for a wide variety of applications ranging from costume jewellery to furniture to sporting goods

• Package contains: 1 Pcs. 50ml Threadlocker
• Metal parts are removable with hand tools for easy disassembly
• Sets in 10 minutes; cures in 24 hours
• Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
• Useful for small motors, mowers, and power equipment

• Provides a moisture-proof barrier that lubricates and protects electrical connections and wiring from salt, dirt and corrosion
• Extends the life of bulb sockets
• Prevents voltage leakage around electrical connections
• Typical applications include marine and automotive electrical connections, spark plug boots, trailer hitches and battery terminals
• Resistant Properties: corrosion-resistant, dirt-resistant, salt-resistant

• LOCTITE 454 is a general purpose universal instant adhesive that is ideal for vertical surfaces and overhead applications
• Typical Applications: Bonding porous materials such as wood, paper, leather and fabric
• Does not drip or run and is perfect for all quick repairs
• Fixture Time: 45 Seconds

• Metal parts are removable with hand tools for easy disassembly
• Sets in 10 minutes; cures in 24 hours
• Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
• Useful for small motors, mowers, and power equipment
• Very effective

• STRONG & VERSATILE: Works in all conditions and on most materials, including wet surfaces and can even bond two non-porous surfaces
• Interior/exterior appplication:Loctite Power Grab Ultimate Construction Adhesive is a high-quality interior/exterior construction adhesive that delivers excellent results in most applications.
• Multi-construction material: Bonds to most common construction materials such as wood, plywood, MDF, concrete, glass, marble, granite, tile, porcelain, stone, masonry, brick, foam insulation of all sorts including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam), metal, ceramic, drywall, rigid and cellular vinyl and many more
• TOUGH AGAINST WEATHER: Strong adhesion with no shrinkage thats waterproof and resistant against extreme temperatures from 40 degreeF to 104 degreeF for interior and exterior projects
• INSTANT GRAB: Reduces need for bracing and nailing with quick initial tack; formula sets in 10 minutes and cures in 24 hours
• CERTIFIED: GREENGUARD certified and meets subfloor rated spec ASTM D-3498 and APA AFG-01

• Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
• Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
• Permits disassembly with hand tools
• Especially suited to small thread sizes
• Easy to use

• Loctite 40140 Clear 40140 401 Prism Surface Insensitive Instant Adhesive, 20 mL Bottle
• Clear