Industrial & Scientific Store - Test, Measure & Inspect

• Slim, ergonomic design with rounded edges and a case that is only 17 mm (0.7 inch) thick, the HI98301 is thin and fits comfortably in the hand or pocket
• Large multi-level LCD, the LCD is 29 mm (1.125 inch) x 20 mm (0.81 inch) allowing the user to easily read both the pH and temperature simultaneously
• Two-button operation-one for On or Off, the other for calibration
• Exposed Temperature Sensor: Exposed temperature sensor allows for quick automatic temperature compensated measurements
• Temperature can be displayed in either degree Celsius or degree Fahrenheit
• Graphite Sensor: Reduces polarization effects and does not oxidize resulting in a reliable and accurate reading
• Automatic Calibration: Automatic calibration at 1382 ppm (mg/L) with a single push of a button
• Stability Indicator: A clock tag stability indicator will disappear to alert the user when the reading is stable
• Automatic shut-off, user-selectable time until meter shuts off to conserve battery life
• Options are 8 min, 60 min or disabled
• Low Battery Indicator: Low battery indicator that is displayed when less than 10 percent battery life is remaining
• Battery percent level at startup, at start-up, all the LCD segments are displayed for 1 second, then the percent indication of the remaining battery life is displayed
• TDS range 0 to 2000 ppm (mg/L)
• TDS Resolution: 1 ppm (mg/L)
• TDS Accuracy: ?2 percent F.S
• Temperature Range: 0.0 to 50.0 degree Celsius or 32.0 to 122.0 degree Fahrenheit
• Temperature Resolution: 0.1 degree Celsius or 0.1 degree Fahrenheit
• Temperature Accuracy: ?0.5 degree Celsius or ?1 degree Fahrenheit
• Calibration automatic, one-point
• Temperature compensation automatic from 0 to 50 degree Celsius (32 to 122 degree Fahrenheit)
• TDS conversion factor 0.5
• Battery Type or Life: CR2032 3V Li-Ion (1 piece) or approximately 250 hours of continuous use
• Auto-off after 8 minutes, 60 minutes, disabled
• Environment 0 to 50 degree Celsius (32 to 122 degree Fahrenheit)
• RH max 100 percent
• Dimensions 160 x 40 x 17 mm (6.3 x 1.6 x 0.7 inch)
• Weight 68 g (2.4 oz.) without battery
• Ordering Information: HI98301 is supplied with protective cap, 1382 ppm calibration solution sachet (4), CR2032 battery, instrument quality certificate and instructional manual

• The following items are included in the package: - 10 K Potentiometer
• 6mm mounting diameter
• 5mm shaft diameter
• 12mm shaft length
• ohm value: 10000 Ensures unrivalled performance

• 4-in-1 Tester - Measuring Freezing of automoblie antifreeze based on ethylene glycol or propylene glycol -60? to 32?. Measuring Specific Gravity of battery acid 1.10 to 1.40Kg/L. Measuring of Windshield Washer Fluid based on ethanol or isopropyl alcohol -40? to 32?. Measuring Urea Concentration in automobile diesel exhauset fluid (DEF) 30% to 35%
• Display In Fahrenheit - Updated antifreeze coolant refractometer in Fahrenheit (?) display, allow you easy to read measured results by ? unit, no need to units conversion and save your time
• ATC Function - Coolant refractometer Fahrenheit can automatically compensate temperature when ambient temperature changes, eliminate the deviation, you can get the accurate results fast and easier
• Easy To Use - Only need 2 or 3 drops of solution and wait for few seconds, then you get the accurate results. These antifreeze tester needs less sample solution than tradistional hydrometer and less expensive then digital refractometer
• Customer Support If you have any query regarding the refractometer or application please what's app us on our customer Support(9560172388)

• Product name : potentiometer; model : 3590S-2-104L 100K ohm ; Type : rotary potentiometer ?
• Resistance Tolarance : +/-5%; Linearity : +/-0.25%; Shaft Diameter : 6.35 x 10mm/ 0. 25\" x 0. 4\"(D*l)
• Temperature Co-efficient : 50 ppm/C
• Operating Temperature Range (C) : -40 to 125 | Type : Rotary Shaft ; Technology : Wirewound; Turns : 10; Power: 2W ; Rotating Life: 1,000,000 times
• Threaded Diameter : 9mm/ 0.35\";Body Size(No Include Shaft) : 22 x 19mm/ 0.9\" x 0.7\" (D*H);Total Length : 42mm / 1.65\"

• High-Quality Isi Approved PVC Coated Fiberglass Tape Over 3 Times Longer Life Than Metal-Wired Tapes.
• Specially Designed Winding Handle For Smooth Winding Action & Long Life
• High Tensile Fiber Glass Tape Strength Withstand Over 2kg (4.41lbs) Of Tension | Easy To Clean | Length 50meter X 13mm Width | Complete Abs Plastic Body | Class Iii Accuracy | Weather Resistance | Non-Creasing
• Flexible Strong And Durable Non-Conductive, Non-Creasing, Water & Weather Resistant Unbreakable Abs Case Ergonomically Designed Case Fits Comfortably In Hand
• Plastika Fiberglass Fiber Tape Produced By Twisting Of Continuous Stands Formed And Has Highest Tensile Strength Withstand over 200kg Pulling Force

• ??High Accuracy This 3-in-1 quality tester uses a food-grade stainless steel probe and ATC (Automatic Temperature Compensation) to read the temperature instantly to ensure that the water quality tester reads accurately at various temperatures, and does not test pH.
• ??3 in 1 Function This professional Water TDS meter can test TDS, EC, and temperature. It can measure the TDS value ranging from 0~4995 ppm and the EC value ranging from 0~9990 ?s/cm.
• ??Auto off & Lock Functions The TDS tester has a data-hold function, it locks your readings making them easy to record. The TDS tester has a power-saving function, and the digital water quality tester will automatically shut down after 5 minutes of standby.
• ??Backlit Display The water quality tester uses an advanced LCD backlight display design, making readings easier and clearer. The data can be viewed clearly in the dark. You will prefer its comfortable shell.
• ??Multifunctional use This TDS tester helps you find out the quality of the water for drinking, bathing, a cup of salt water, pools, etc. It also helps you gain a clear insight into the nutrient levels in hydroponic setups, garden soil, and so on.

• Mitutoyo 500-196-30 - aos - absolute digital vernier caliper, 0-6\" range
• Patented advanced onsite sensor (aos) offering improved measurement dependability by increasing resistance to harsh workshop conditions
• Lcd readout and function control buttons on the caliper face, including origin to set and retain the original measuring point, and zero/abs (absolute scale) to zero-set the lcd display
• Comes with a calibration certificate
• Made in japan

• Smart air quality monitor that uses laser-based light scattering technology
• Gives readings for PM2.5, TVOC, temperature and humidity, AQI index, weather forecast
• Accuracy ( plus or minus 10 percent) in Indian conditions
• Know the air quality from anywhere! compatible with apple homeKit

• Basic function: temperature / humidity display
• Multi Function Accurate hygrometer digital thermometer displays high and low temperature & humidity;At the same time, recording clock time, date. youre always aware of changes to your home/household with just a quick glance
• Memory Function: When press button \"MEMORY\", the humidity reader device will display the temperature and humidity date of memory maximum and minimum
• High Accuracy and Quickly Refresh Inside thermometer has high accuracy of ?2~3%RH and ?1 degreeF, making it ideal for measuring fluctuating readings like in a greenhouse; Data measurements are updated every 10 seconds to give you lastest changes of the environment
• Humidity range: 10% ~ 99% RH, Humidity accuracy: -/+10% RH Special Feature: Besides the basic time display, these item also has alarm clock and calendar display (month and date)
• Battery Operation: Require 1 x AAA battery ( include)

• Measuring Range 35 ~ 135dB
• Fast Time Response Weighting
• Temperature Measurement degreeC / degreeF
• Max / Min / Data Hold

• Indian Brand Product
• Digital & Nano Technology
• Accurate Reading
• Small & Light Weight
• Industrial & Home Use Purpose

• Optical Cable Tester VFL, Size (LxBxH): 176.6cm - 2.4cm - 2.4cm. Output Optical Power: 10mw, 2.5mm Universal Connector, Operates Either in Continuous Work or Pulse Mode. The Corslet Visual Fault Locator Locates Bends & Breaks in Jacked or Bare Fiber.
• Corset 10mw Visual Fault Locator: Unique Pen Design Visual Fault Locator, Easy Identification of Fiber Breaks, and Bends. It Is Also Used to Identify the Connectors in Patch Panels and Identify the Fibers During the Splicing Operation.
• The Vfl 10mw Provides End Fiber Identification, Complete Mechanical Connecting Point Detection and Optimization, Crash-Proof, and Dust-Proof Design for Laser Head.
• Output Wavelength: 650nm, ? 2hz Output Power: 10mw, Connector: 2.5mm Universal Connector, Battery: AA*2(not Included), Working Temperature: -10 degreeC+ 60 degreeC, Storage Temperature: -20 degreeC +60 degreeC
• Telecommunications, Catv Engineering, and Maintenance - Integrated Wiring Construction and Maintenance - the Production and Research of Optical Devices - Other Optical Engineering.

• Single phase signal lamp is suitable for using as a signal LED visual indicator or for warning with rated voltage 230V and 50HZ
• Light Source: LED Diode
• Color: Green

• Protects against Phase Loss, Phase Reversal & Phase Asymmetry
• Multi-Voltage: Three Phase wire @ 208 480 VAC
• Selectable Under Voltage / Over Voltage & Asymmetry
• LED Indication for all Faults & for change in settings during run time for better security
• 1 C/O Configuration

• Updated version of M2000, data export (CSV format) available via USB.
• Multifunctional air quality monitor device with high precise Dart electrochemical formaldehyde sensor, Temtop professional-grade laser particle sensor, and carbon dioxide sensor based on NDIR.
• This detector can detect PM2.5 PM10 Particles CO2 HCHO Temperature and Humidity.
• Audio alarm, colorful TFT display, ergonomic design, built-in rechargeable large capacity battery.
• Easy understanding user interface, temperature unit Fahrenheit and Celsius switchable. 24/7 US Technician Support via Email and Phone.

• Enclosure rating IP: 30, Electrical Connection: Rubber cable gland, Connection Size: 6-14 mm
• KP35 Good quality
• Useful product