Industrial & Scientific Store - Test, Measure & Inspect

• This is a 2 Analog channels+2 Digital channels digital storage oscilloscope for DIY electronic engineering in measurements based on ARM Cortex M3 core.
• Portable and lightweight, it is only about the size of a wallet, very convenient to use for anywhere you go. Ideal for beginner of electronic engineering.
• The DS213 model is able to store waveforms for clearer and more effective analysis.
• Multiple trigger modes in ascend/descend edge trigger; positive/negative pulse trigger and logic trigger.
• Very powerful to proceed waveforms which can automatically measure parameters such us voltage, frequency and pulse width.

• Aluminum die-casting case, stainless steel shackle
• Alloy steel hook, led module display
• Strong reliability, cutting-edge technology, quality integrated circuit for high performance
• Complete function, resolution switch, unit conversion, auto power-off, battery inspection
• AA x 6 batteries, capacity 1000kg

• DETECTION RANGE: Approximate range is 50 to 10,000 ppm (Based on Methane)
• HIGH AND LOW SENSITIVITY: Two adjustable sensitivity levels (Cat No. ET120)
• VISUAL AND AUDIBLE ALERTS: Five red visual LED's and audible alerts increase with detection of gas concentration
• FLASHING LIGHTS: Lights flash during self-calibration and automatic zero-point calibration at power-up
• STATIC AND DIFFERENTIAL PRESSURE: Measures pressure from dual-ports in air and gas systems (Cat. No. ET180)
• MONITOR AND TROUBLESHOOT: Monitor problems in HVAC Systems with a range of +/- 60 inH2O and full scale accuracy of +/-1.5-Percent
• HANDS-FREE OPERATION: For hands-free operation, the manometer's strong magnet on the back securely attaches to surfaces

• MULTIPLE PURPOSE: These direct burial copper ground rod clamps are designed for maintaining proper alignment and contact between ground wires and rods. Utilize for commercial, industrial, agricultural or residential applications.
• HIGH-QUALITY CONSTRUCTION: This direct burial copper ground rod clamp is made from high-strength, copper alloy for durability.
• RANGE OF OPTIONS: Equipped with 1/0-10, 1-10 and 2-10 wire ranges, these direct burial copper ground rod clamps offer a range of diameters that include , 5/8?, and 3/8?.
• SAFETY APPROVED: Each direct burial copper ground rod clamp features bolts made from stainless steel or silicon bronze and are UL 467 listed for direct burial in soil or concrete.
• COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.

• Make contact measurements of rotating objects
• Measure linear surface speeds in feet/minute or meter/minute using the three accessory wheels provided
• 0.05 percent accuracy
• Recalls last/maximum/minimum values

• Parameter?Dual channel waveform generator, 70MHz frequency output; Max 300MSa/s Sample rate?Vertical resolution 1?Hz; 14 bits Vertical Resolution, 8K Arb waveform length
• Function: Comprehensive waveform output: 5 basic waveforms and 150 built-in arbitrary waveforms; Comprehensive modulation functions: AM, FM, PM, FSK, Sweep and Burst
• Utility function: Setting brightness of the screen; Screen Saver(If there is no operation within the set screen saver time, the screen enters the protection mode );Setting data separator; Setting load; Setting language; Beeper; USB Device Type
• DGE2070 adopt 3.6 inch TFT color LCD display, each channel output waveform status and menu settings can be fully displayed on the screen. With convenient shortcut key, it makes man-machine interaction more convenientand effectively improve working efficiency

• Fowler 1.5\" diameter test indicator with height gage bar and axial support is designed to measure surface variations in narrow or recessed areas in fractions of an inch, comes with full 1 year warranty offered by Fowler, an American company
• Balanced dial with 0-15-0 dial reading, 0.060\" range, 0.0005\" graduation, revolution counter and auto reverse mechanism provides smooth movement for measuring from a specific reference point
• Three carbide contact points with 0.5\" length and 0.040\", 0.080\" and 0.120 point diameters swivel 210 degrees to reach any location
• Dovetail mounts on front and back and 5/32\" stem-type mount on top provide a range of mounting options
• Axial support with three hinges and positive locking using three hex screws provides stable locking in a variety of positions

• 1: 110 MHz bandwidth, 1 GS/s real-time sampling rate, 4 channels, 2 ns / Div ~ 1000s / Div time base range; 5 mV/div?5 V/div vertical scale, storage depth (each acquisition The recording length of the waveform) is not less than 20K sampling points; it can store not less than 16 groups of waveforms, and has U disk storage function, USB device and host interface;
• 2: 7-inch TFT LCD screen (true color), 65535 colors, resolution 800?480 pixels; supports cursor measurement, the cursor mode is no less than voltage difference (?V), time difference (?T), time difference and voltage difference ( V) Four modes of automatic cursor;
• 3: It has automatic range function and supports horizontal, vertical, single waveform/multiple waveform tracking; there are four probe attenuation multiples: 1X, 10X, 100X, and 1000X;
• 4: Built-in 6-digit hardware frequency meter, capable of measuring 2 Hz ~ 20 MHz; with current measurement function, measurement range: 100.0 mA/V ~ 1 kA/V; with U disk storage function; USB device and host interface; host software download Address: bit.ly/3W4dCxA;
• 5: It has 30 automatic measurement functions and can customize the measurement menu; it has a waveform capture function, supports LABVIEW communication, supports secondary development, and complies with SCPI specifications; powered by DC.

• The First True 4K 60FPS Digital Welding Microscope, Dual Screen 4K 60FPS Real-Time Viewing and Recording 2024 LM210S welding microscope with shocking upgrade supports HDMI monitor and built-in 10.1 microscope screen 4K 60FPS UHD display and 4K 60FPS video recording simultaneously

• Range 0-100mm
• Resolution 0.001mm
• Special Features 63.5mm x 16mm Base, 4 Rods
• Measurement Accuracy +/-0.0033mm

• Efficient: The testo 552 monitors the evacuation of hvac and heat pump systems dynamically. Thanks to optimized Pirani sensors, deep vacuum measurements are easier than ever
• Versatile: The pressure measurement tool is equipped with countless features in order to provide precise, comprehensive vacuum measurements down to single digit resolutions
• Time-saving: Thanks to groundbreaking real-time calculations, the testo 552 determines micron/temperature levels and provides notifications when the evacuation target is met
• Smart: The device communicates with smartphones or tablets via Bluetooth connection, thus providing reliable, precise analyses and reports which can be forwarded via e-mail
• App for Android and iOS: The free testo Smart Probes App is a powerful tool that allows you to read and log measurements and create custom reports which can be saved and shared

• Digital water flow meter, CGWA complied meter, telemetric moderm avilable

• Item Package Quantity: 1
• Number of Items: 1

• Objective 0.7-45x , Auxiliary 0.5x Working distance: 165 mm
• Eyepiece: Extra wide field 10x Eyepiece w Spectacle Correction 30mm Ocular
• Parallel PLAN Zoom Objectives Adjustable Interpupilary Distance Diaoptric Adjustment on Both Eyepiece