Test, Measure & Inspect By amiciSense

• Dual Input: - Oscilloscope that has 2 input channels and a real time sampling rate of 1GSa/s and an analog bandwidth of 110 MHz
• Display:- 7 LCD Display which results in clear view of readings with 800x480 resolution.
• Communication interface: Front side USB Design .Suitable for electronic circuit debugging, circuit testing, design and manufacturing, education and training, vehicle maintenance and testing.

• Dual Input: - Oscilloscope that has 2 input channels and a real time sampling rate of 1GSa/s and an analog bandwidth of 110 MHz
• Display:- 7" LCD Display which results in clear view of readings with 800x480 resolution.
• Communication interface: Front side USB Design .Suitable for electronic circuit debugging, circuit testing, design and manufacturing, education and training, vehicle maintenance and testing.

• 2 in 1: - A device which is a combination of multi-meter and current sensor, therefore the device can calculate both voltage and current.
• Multi-Functional: - The device can test AC voltage, AC current, DC voltage, Frequency, Capacitance, Temperature and Resistance.
• Intelligent: - With overload protection, the device automatically sets the measurement range and function.
• Features: - With LCD display and back-lit, the reading is clear in dark surroundings. Also the device is equipped with data hold, auto-shut and low battery indication.

• Non-Contact Voltage Tester With ABS plastic insulated body you dont have to worry about voltage passing to your body.
• Breakpoint Detector - In case of breakpoint in the line wire the beep sound will stop indicating breakage in the line.
• Auto Power Off - After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy.
• Sound and Light Alarm & LED Flashlight - A LED flashlight with low power consumption helps in illuminating the workspace in dark. In case voltage is been tested, the pen will give LED Flash/Buzzer Alarm
• Package Include: - A touchless voltage tester with 2xAAA battery.

• Large-screen -display voltage, current, active power, energy at the same time
• Store energy data when power off(can be reset to 0). The blue backlight can be turned on/off manually
• Apply to power grid voltage 220V with Rated power: 10A / 2000W

• BT-168 PRO is an upgraded version of BT-168D, which adds the function of testing lithium batteries, and its performance is more stable and reliable.
• Test the battery capacity with BT-168 Pro with reading visible on the LCD Display. Just clamp the battery in the test arms and you are good to go. In case of a 9V battery just place the battery in the two test holes.
• It is ALL IN ONE UNIT. You can test different sizes and types of batteries with this tester whether it is a button cell, high volt battery or lithium battery.
• This Battery Tester is activated by the battery being checked. No Internal / External power source required to work.
• Package includes 1*BT-168 Pro battery tester with no added batteries and 1 year warranty.

• Wide Range: The digital infrared thermometer is capable of measuring temperature ranging from -50 degreeC to 580 degreeC, allowing for versatile use in various applications.
• Non-Contact Measurement: This thermometer utilizes infrared technology to measure temperature without making physical contact with the object, ensuring hygienic and safe readings.
• Quick Result: With its advanced infrared sensor, this thermometer provides rapid and precise temperature measurements within 0.8 seconds, saving time and enhancing efficiency. The device will shut automatically after 15sec when not in use.
• User-friendly design: The thermometer features a clear LCD display that shows the temperature readings in a user-friendly format. It also offers convenient features like backlight for low-light conditions and a hold function to freeze the displayed temperature for easy recording.
• Multiple applications: This digital infrared thermometer is suitable for a wide range of applications, including cooking, HVAC systems, automotive maintenance, electrical troubleshooting, and more. Its versatility makes it a valuable tool for professionals and homeowners alike.
• Measuring Distance: -It's work ratio is 12:1 i.e. farther the target, larger is the spot area. The diameter of the target spot area is 3.0cm when you test it from a distance of 36cm, the thermometers will show the average temperature of target spot area with 3.0cm diameter.

• This Multi-Battery Tester provides a comprehensive means of testing different battery types.
• You will get instant power readouts for AA, AAA, C, D, 9V rectangular batteries, quickly and effectively!
• It has a clear bar graph LCD display that computes the battery's actual remaining power capacity and three color-coded zones labeled \"good\", \"weak\" and \"poor\" that shows the actual condition of your battery.
• There are no settings, and test results are easy to understand, just pop the battery and you'll see how much power is left as well as the condition of your battery.
• Suitable for carbon, zinc, alkaline and rechargeable batteries.

• Universal Interface: This amiciSense optical power meter supports all the three most used optical fiber interfaces i.e. 2.5mm {SC, FC, ST}, you just have to plug the cable and use, thats it. You can now test your fiber optic cables yourself in case of any issue
• Seven Wavelengths Support: One of the most unique features of this power meter is that it supports seven kinds of calibration wavelength: ( 850nm, 980nm, 1300nm, 1490nm, 1500nm, 1500nm,1625nm), allowing you to cyclically switch between multiple Wavelengths.
• Inbuilt LED Flashlight : You can continue test even in dark surroundings with the help of a mini torch present at the front of the meter.
• HD Display : This fiber optic tester has an LCD color screen that lets you read the reading clear in dark surroundings.
• USB Charging : With an inbuilt charging port you can charge your device anytime and anywhere. (Note: The products come with 1 year warranty. To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section)

• Automatic Socket Tester: - Plug-in the tester in the socket and press power button for 2 sec, the tester will automatically test Earth, Neutral and Line wire. The affected line will be clear on the display in case of any imbalance.
• Color Display: -LED screen display bright colored test readings on screen. In dark and in sunlight reading displayed will be clear to read.
• Portable: - Small size and pocket friendly design allow you to test all sockets in your home and office with ease.
• RCD Test: - Press RCD test button for 3 sec and its done. Please make sure that all electric appliance is powered off while performing test.
• Touchless Detection: - Beep sound indicate AC voltage nearby without any physical contact.
• Warranty: - The products come with 1 year warranty (To claim warranty contact the Importer detail mentioned below in Product Details .)

• Voltage Tester: - Check the voltage readings of all 3-phase simultaneously with help of amiciSense voltmeter.
• Compact: - Mini voltmeter does not take up too much space in your fuse box. 1.8 cm wide, this device speaks more than its size.
• Accuracy: - With a measuring rate of 200ms, the device is highly accurate and the readings displayed are real time values.
• Display: - LED display ensure readings visibility even in dark surroundings.
• Warranty: - The products come with 1 year warranty (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)

• Usage :- DC 5~100V, mini size voltmeter is ideal to check battery voltage.
• Display: - 3-digit LED green color display ensure readings visible in dark surroundings.
• Compact: - With diameter of 30mm and 2 wire connectivity the device is easy to install.
• Feature: - Comes with reverse connection protection
• Warranty: - The products come with 1 year warranty (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)

• 6 in 1 Watt Meter: - Check 6 readings simultaneously, i.e. voltage(40-300V), current(0-100A), power(0-30000W), energy(0-99999kWh), frequency(45-65Hz) and power factors(0-1PF).
• Function: - You can now monitor the power consumption of any appliance as per your requirement. Note- In case power factor is less than 1, divide active power (kWh) by PF to get actual power reading.
• Display: - Colorful LCD HD display with back-light function makes readings clearly visible even at night.
• Application: - This monitor is easy to install and can be widely used in school, market, home appliances, industry, laboratory, etc.
• Reset: - To reset energy meter, press the reset button for 5 sec. Also, the data will be saved automatically when power off. When energy reading reach 99999kWh the device has to be reset.
• Warranty: - The products come with 1 year warranty (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)

• Wind speed and temperature measurement : Max/Average/Current
• Celsius ( degreeC) to Fahrenheit ( degreeF) Temperature unit selection: Range: -10 to 45 degreeC (14 to 113 degreeF)
• Five units of Wind speed: m/s, Km/h, ft/min, Knots, mph
• Beaufort scale: For measuring wind speeds. It is based on observation rather than accurate measurement. It is the most widely used system to measure wind speed today
• Blue Back-lit display: Manual/Auto power shut off: Wind chill indication, Low battery indication: Battery: - CR2032, 3.0V(included)

• 6 in 1 Watt Meter: - Check 6 readings simultaneously, i.e. voltage(40-300V), current(0-100A), power(0-30000W), energy(0-99999kWh), frequency(45-65Hz) and power factors(0-1PF).
• Function: - You can now monitor the power consumption of any appliance as per your requirement. Note- In case power factor is less than 1, divide active power (kWh) by PF to get actual power reading.
• Display: - Colorful LCD HD display with back-light function makes readings clearly visible even at night.
• Application: - This monitor is easy to install and can be widely used in school, market, home appliances, industry, laboratory, etc.
• Reset: To reset the energy meter, simply press and hold the reset button for 5 seconds. Additionally, please note that all data will be automatically saved when the power is turned off. Once the energy reading reaches 99999 kWh, the device will display an \"HHH\" error, indicating the need for a reset. (Note- Product comes with 1 year warranty