Test, Measure & Inspect By amiciSmart

• Temperature Controller: - This product is used to maintain the required temperature range by setting start and stop temperature. You can set the temperature range in between -50 degree to 110 degreeC.
• Dual Mode: - You can use it for heating and cooling mode both; in case of heating mode start temperature will be less than stop temperature and in case of cooling mode it will be opposite.
• Accurate: - 0.1 degreeC accurate, this thermostat instantly disconnect or connect the load when reach the set temperature range.
• Calibration: - In case you find visible temperature range not accurate then you can calibrate it yourself; press both buttons simultaneously and adjusting temperature range.
• Easy Settings: - Long press the up button for 3 seconds to set the start temperature. When the display starts blinking set the required temperature and when done it will be saved automatically. Similarly, to set the stop temperature press down button and follow same procedure.
• Waterproof Sensor: - In this device you get 100 cm long temperature sensor which is completely waterproof.
• Error Codes: - In case of sensor related issue code LLL will be display; when HHH is visible that means the temperature range sense is greater than the product range i.e 110 degreeC.
• Warranty: - The products come with 1 year warranty (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)

• Why do you need this?- To protect your home appliance from damage due to sudden voltage and current fluctuations
• Multi-Protection: -This product cover all three protection range i,e Over voltage, under voltage and over load protection with action time of 0.1 sec.
• Range: - Over voltage protection ranging 230~300V, under voltage protection ranging 140~210V and over current protection ranging 1~63A.
• Auto Reconnect: - In case of voltage fluctuations, the device instantly cut off the power supply. When supply is back to normal, the device automatically reconnect supply within 1~500 sec (adjustable)
• Note:- Maximum sustainable voltage of this device is 440V. In case of surge this product will destroy itself without damaging your appliances. Your appliances will safe.

• 2 in 1: - Voltage protector with energy meter is all that is required; With over voltage under voltage protection, the device measures instantaneous RMS Energy as well as Historical Energy readings upto 0-9999 kWh
• Voltage Protector: -It provides various protections to complete house Over Under Voltage Protector and Overload / Current Protection with wide adjustable range (refer manual for complete details)
• Display: -LCD Screen displays the Total Energy (kWh), Real-time current (a), voltage (V), Active power (W)
• Range: -Over-voltage protection: 85-300 V (default 270 V); Under-voltage Protection: - 85-300 V (default 170 in);Over-current Protection: - 1-63A (default 40A); Power on Delay After Power Off: - Default 2 sec, Recovery Time / Recovery voltage gap is adjustable
• Note: - In case of constant tripping, turn off the malignant load protection (Resistive load limit). It can be adjusted from 0.5A~5A and it trip when sense instant increased load

• Requirement: - If you have a 3-phase connection than this device can be of use with 3-phase over and under voltage and over current protection along with real time voltage and current monitoring.
• Adjustable Nature: -Ths device comes with the provision of setting default protection value as per your requirement.
• Quick Response: - With 0.1s cut off time, you can set the response time ranging 0.1~30sec
• Phase Loss Protection: - This feature is a must if this device is used for industrial purpose where all phase presence is required. In case of even one phase lost the device will cut off the power supply.
• Phase Imbalance Protection: - In case of difference between 3-phase voltage, the device will cut off. You can adjust this as per your need and requirement ranging 20~99V

• Why do you need this?- To protect your home appliance from damage due to sudden voltage and current fluctuations
• Multi-Protection: -This product cover all three protection range i,e Over voltage, under voltage and over load protection with action time of 0.1 sec.
• Range: - Over voltage protection ranging 230~300V, under voltage protection ranging 140~210V and over current protection ranging 1~63A.
• Auto Reconnect: - In case of voltage fluctuations, the device instantly cut off the power supply. When supply is back to normal, the device automatically reconnect supply within 1~500 sec (adjustable)
• Adjustable: - You can adjust reconnect time and cut of values as per your requirement.
• Note:- Maximum sustainable voltage of this device is 440V. In case of surge this product will destroy itself without damaging your appliances. Your appliances will safe.
• Warranty: - The products come with 1 year warranty against manufacturing failure (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)