Test, Measure & Inspect By Amprobe

• Low influence of external low frequency magnetic fields: @ IN: 3. 500 mA 600. 0 mA 30 A/m, operating class 2
• True-rams measurements for accuracy when measuring complex, non-sinusoidal waveforms
• Mechanical jaw lock to assure accuracy of low current measurements, avoiding disturbance from measured wires and magnetic fields; jaw opening 1. 2 in (30 mm)
• Selectable filters: low pass 50/60Hz filter to perform measurements on equipment driven by variable frequency drives (VFDs) or affected by high frequency noise, appliance filter to conduct leakage current measurements on appliances and no filter

• Measure temperatures quickly and accurately from 50 feet away using the laser pointer
• Temperatures ranges available between -58 degree Fahrenheit to 2822 degree Fahrenheit (-50 degree Celsius to 1550 degree Celsius)
• Updates four times per second
• Uses include automotive diagnostics, HVAC service, electrical troubleshooting, industrial maintenance, fire prevention, thermal leak detection, cooking and food preparation, as well as outdoor grilling
• 8 seconds auto display hold for easy read-out

• Measures rotational and surface speed
• Built-in memory
• Digital display
• Auto power off function
• Easy to select units and mode functions
• Select rpm using infrared beam or adapter, m/min, m/sec, ft./min, ft./sec, in/min, m, ft. and in.
• Includes 6 adapters, carrying case, reflective tapes batteries and users manual

• AC/DC Voltage up to 1000V, ac/dc current
• Resistance, frequency, capacitance
• Temperature, duty cycle
• Low Z - to detect stray voltages

• Verify presence of voltage from 30 V AC to 122,000 V AC (122 kV) in transmission lines, power distribution equipment, down power lines, fuses and load break connectors
• Easy to use; Push one button to turn the unit on, another to select low or high range setting; The unit flashes and beeps with increasing frequency as it nears a source of electricity, leaving no doubt whether the source is live or not
• Has a lower voltage setting for checking voltage presence in breaker panels, breakers, power outlets and wiring
• MSHA certified and intrinsically safe
• PPE gloves, no problem, push button functionality allows for ease of use

• True-RMS
• Capacitance measurement for start and run motor capacitors
• Safety Rated: CAT III 600 V (AMP-310, AMP-320)
• CAT IV 600 V, CAT III 1000 V (AMP-330)

• Audible continuity buzzer confirms that a circuit is capable of conducting current

• Material: Plastic
• Color: Yellow and Red
• Size (L x B x H): 27 x 18 x 7 cms

• Capacitance measurement for start and run motor capacitors
• Safety Rated: CAT III 600 V (AMP-310, AMP-320); CAT IV 600 V, CAT III 1000 V (AMP-330)

• Relative humidity (RH) and temperature meter measures temperature, relative humidity (RH), dew point and wet bulb and is used for HVAC, indoor air quality and environmental applications
• Dual-scale thermometer measures wet- and dry-bulb temperature and dew point in Fahrenheit and Celsius
• Capacitive humidity sensor ranges from 0 to 100 percent relative humidity (RH)
• Data hold for recording data and minimum, maximum and average temperature readings
• Flexible probe reaches inside ducts and other hard to reach areas and tripod mount stabilizes meter for extended readings

• Handheld digital meter measures ambient level of carbon dioxide (CO2) to monitor indoor air quality and performance of heating, ventilation and air-conditioning systems
• Displays current CO2 levels, long-term average CO2 levels measured over an 8-hour period and short-term average CO2 levels measured over a 15-minute period
• Alarm notifies operator when CO2 levels reach or exceed a preset threshold
• Liquid crystal display (LCD) shows ambient CO2 levels, as well as air, wet bulb or dew point temperature and humidity
• Manual calibration helps ensure accurate humidity and CO2 readings

• Measures rotational and surface speed
• Built-in memory
• Digital display
• Auto power off function
• Easy to select units and mode functions
• Contact and non-contact measurement
• Select rpm using infrared beam or adapter, m/min, m/sec, ft./min, ft./sec, in/min, m, ft. and in.
• Includes 6 adapters, carrying case, reflective tapes batteries and users manual

• Verify presence of voltage from 30 V AC to 122,000 V AC (122 kV) in transmission lines, power distribution equipment, down power lines, fuses and load break connectors
• Easy to use; Push one button to turn the unit on, another to select low or high range setting; The unit flashes and beeps with increasing frequency as it nears a source of electricity, leaving no doubt whether the source is live or not
• Has a lower voltage setting for checking voltage presence in breaker panels, breakers, power outlets and wiring
• MSHA certified and intrinsically safe
• PPE gloves, no problem, push button functionality allows for ease of use

• Audible continuity buzzer confirms that a circuit is capable of conducting current

• Relative humidity (RH) and temperature meter measures temperature, relative humidity (RH), dew point and wet bulb and is used for HVAC, indoor air quality and environmental applications
• Dual-scale thermometer measures wet- and dry-bulb temperature and dew point in Fahrenheit and Celsius
• Capacitive humidity sensor ranges from 0 to 100 percent relative humidity (RH)
• Data hold for recording data and minimum, maximum and average temperature readings
• Flexible probe reaches inside ducts and other hard to reach areas and tripod mount stabilizes meter for extended readings

• Dual display
• Extended probe stem to easily access air ducts
• Dew point
• Wet bulb
• Minimum or maximum readings
• Data hold
• Capacitive sensor with protective cover
• Auto power off
• Carrying case