Test, Measure & Inspect By Fluke

• Easy Switching of the Contact and Non-contact Measurement Modes
• Different Speed Measuring Heads to Adapt to Different Measurement Occasions
• 6-digit Backlit Display for Easy Data Visualization Signal Detection Reminder Minimizes False Readings
• Maximum/minimum/average Value and Final Readings
• Small Size With Rugged Housing Over Mold to Protect Against Drops

• Voltage: Dc: 600 Volts
• Ac Accuracy: 1.5% + 5 Digit

• Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
• Durable ribbon sensor
• Measurement range: -29 to 149 Degree Celsius
• For pipe diameters: 6.4 mm to 34.9 mm (.25 to 1.375-Inch
• packed included 1pc

• Voltage: Dc: 600 Volts
• Ac Accuracy: 1.5% + 5 Digit

• Phase Display: 120-400 Volts Ac
• Power Supply: 1 X 9 Volts

• Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications.

• Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Capacitance and leakage current measurement

• More precise measurement and calibration source performance, accuracies of 0.01 percent
• 2 separate channels; measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency and resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency and pressure to calibrate transmitters. Source mA with simultaneous pressure measurement to conduct valve and I/P tests.
• Integrated pressure switch test allows you to capture the set, reset and deadband of a switch.

• Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
• Consistent data quality at both low and high frequency ranges
• Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
• Trending in Microsoft Excel using built-in templates
• Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines

• Fluke IR-Fusion Simply slide your finger across the screen to adjust the level of infrared that you need.
• Battery life Over 10 hours of battery life.
• Rugged reliable tool Engineered to withstand a 2 meter drop, water and dust resistant (IP54).
• Fluke Connect Asset Tagging Scan a QR code and automatically sort your thermal images by asset.

• Signal Detection Reminder Avoids Invalid Detection Actions
• Small Size and Easy to Hold

• Dual Infrared and Thermocouple Thermometer for Noncontact or Contact Temperature Measurement in Electrical Maintenance and Monitoring Industrial and Manufacturing Processes
• Measures Temperature With the Infrared Sensor From -40 to +800 Degrees C (-40 to +1472 Degrees F) With an Accuracy of + or - 1 Degree C (+ or - 2 Degrees F)
• Measures Temperature With the Included Type K Bead Thermocouple From -40 to +260 Degrees C (-40 to +500 Degrees F)
• 50:1 Infrared Distance-to-spot Ratio With Laser Sighting for Pinpointing the Measurement Area
• Package Included

• Temperature Range : 0 C to 50 C,32 F to 122 F Air Pressure Range : Air Pressure:? 4000 Pascals,? 16 in H2O,? 400 mm H2O,? 40 mbar,? 0.6 PSI Accuracy For Temperature : 0.1 C,0.1 F Accuracy For Air Flow (Volume) : Accuracy is a function of velocity and duct size
• Accuracy For Air Pressure : 1 % + 1 Pascal,? 1 % + 0.01 in H2O,? 1 % + 0.1 mm H2O,? 1 % + 0.01 mbar,? 1 % + 0.0001 PSI Accuracy For Air Velocity : 2.5 % of reading at 2000 fpm (10.00 m/s) Resolution For Air Pressure : 1 Pascal,0.001 in H2O,0.1 mm H2O,0.01 mbar,0.0001 PSI
• Resolution For Air Flow (Volume) : 1 cfm,1 m3/hr,1 l/s Resolution For Air Velocity : 1 fpm,0.001 m/s
• Operating Conditions : Temp:0 C to +50 C (+32 F to +122 F),Humi:0 % to 90 %, non-condensing
• Data Storage Capacity : 99 readings

• Digital clamp-meter for 24V loop circuits measures direct current (DC) to 100mA via clamp and to 24mA in circuit
• Meter can source and simulate DC signals from 4 to 20mA, and is accurate to 0.2% with a resolution of 0.01mA
• Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications
• Built-in 24V-loop power supply to power a transmitter and measure its milliampere output signal
• Meets EN and IEC safety standards 61010-1 and 61010-2-032

• Infrared Thermometer
• Advanced High-Temperature Model
• Gives perfect reading

• Measure voltage and current with your clamp jaw
• Faster, safer testing - all without touching a live wire - using FieldSense technology
• Complete 3-phase voltage and current tests with fewer steps
• Power quality indicator shows whether equipment or power line is faulty (378 FC)