Test, Measure & Inspect By Seesii

• Upgraded NanoVNA SAA-2N V2.2 Version: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
• Calibration :The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
• Improved Frequency Range:transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
• Improved Performance: High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
• What You Can Get: 1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services

• Upgraded Signal Stability: Seesii Dual-channel DDS arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened
• Storage And Custom: You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish
• High Precise: Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%
• Frequency Meter: With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function.The settings allow you to enter up to 20volts
• Lightweght Compact and Portable: With intuitive control panel, you can easy to control.This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research. This is an important tool for both experts and newcomers

• Upgraded Signal Stability: Seesii Dual-channel DDS arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened
• Storage And Custom: You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish
• High Precise: Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%
• Frequency Meter: With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function.The settings allow you to enter up to 20volts
• Lightweght Compact and Portable: With intuitive control panel, you can easy to control.This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research. This is an important tool for both experts and newcomers

• Upgraded NanoVNA SAA-2N V2.2 Version: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
• Calibration :The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
• Improved Frequency Range:transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
• Improved Performance: High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
• What You Can Get: 1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services