Construction Chemicals - Chemical Additives

• Fast Setting - Araldite Adhesive Klear 5 Sets within 5 minutes providing quick fix
• Transparent - Araldite Adhesive Klear 5 leaves a clear glue line providing seamless bonding compared to any other epoxy glue
• Compatible with Multiple Substrates - Klear 5 Araldite glue bonds a variety of substrates and is ideal as metal glue, glass glue, & wood glue for furniture. Substrates include Glass, Stone, Wood, Metal, Ceramic, Rubber, Dry Concrete, Asbestos, Cement & Bison board, Fabric, Leather & most rigid Plastics.
• Odourless - Klear 5 Araldite glue has no unpleasant odour providing excellent user experience

• Colour: White
• Pack Size: 340 g; Composition: Tetrafluoroethane, Acetone, Toluene, Propylene Glycol Monomethyl Ether Acetate, Alpha-Isomer, Ethanol, Carbon Black, Isobutyl Acetate, Amyl Methyl Ketone, Ethyl Acetate
• Specialty: 1) High Conductivity?Low Surface resistivity of 250 ?/sq for one coat (1 mil) 2) Tough and durable coating 3) Carbon does not rub off 4) Stronger adhesion than water based coatings 5) Low VOCs
• Care Instructions: Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 degree C/122 degree F. Store in a well-ventilated place. Keep container tightly closed.

• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• EASY TO INSTALL: Our butyl rubber seal tape can be easily, quickly, and optimally installed on tight corners, textured, uneven, and most jagged surfaces. Sealing tape can also be used on unusual patterns. Installs without gaps and reliably stops leaks of wind, water, dust, oil, moisture, vapour, corrosive chemicals, and other substances.
• STRONG ADHESIVE DUCT TAPE: The aluminium foil tape is made with a high polymer synthesis butyl glue that has a strong adhesive ability. The waterproof aluminium foil tape can adhere to any surface, including glass, cement ground, tile, plastic, metal, and wood in water, and so on.
• DURABLE & PERMANENT USE: Wear-resistant layers that are non-slip and long-lasting. Waterproof tape for pipe leakage can maintain flexibility and adhesion while withstanding displacement and deformation. Roof water leakage solution is resistant to ageing for many years.
• EXCELLENT WATERPROOF: Leakage repair waterproof tape can be used to repair, seal, hose, pipe, and surface cracks, among other things. Waterproofing is also provided by aluminium tape. Waterproof adhesive tape is extremely resistant to moisture and weather.

• Quick drying and flexible with fuel and oil resistance
• Heat and solvent react vatable
• Curable with heat

• Can be used with Unitint and Piditinit with this shades

• MULTI-USE: Bituminous sealing tape, self-adhesive, used for a wide range of waterproofing work on roofs, building components, caravans
• APPLICATION: Very easy to apply it is enough to remove the release film and press the tape firmly onto the substrate with a suitable roller
• SUPPORTS: Good adhesion to many substrates such as concrete, brick, fibre cement board, tiles, metal, plastic pipes, stone, wood, glass and including bituminous substrates
• USES: Can be over-painted and applied at low temperatures. Used for new and repair work to treat cracks, joints and connections
• UTILITY: Ideal for waterproofing and/or repairing flashings, roof connections, gutters, chimney stacks, skylights, acroterial gutters, motor home roofs

• Extremely high load capacity
• Excellent fire resistance F240 for post-installed rebar connections
• Overhead applications possible
• Remarkable seismic resistance
• Fixings close to free edges, stress free anchoring system

• CHEVETOL Chemical Injection Mortars CHE-OXYGLUE-50
• The CHE-OXYGLUE-50 is a 2-component injection mortar based on Pure Epoxy.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The injection cartridges are quick and easy to use with the CHEVETOL OxyGun dispensing tool.
• Storage and transportation temperature - min. 5 degree C & max. 25 degree C

• CHEVETOL Chemical Injection Mortars CHE-OXYGLUE-50
• The CHE-OXYGLUE-50 is a 2-component injection mortar based on Pure Epoxy.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The injection cartridges are quick and easy to use with the CHEVETOL OxyGun dispensing tool.
• Storage and transportation temperature - min. 5 degree C & max. 25 degree C

• Our aluminum foil tape is made of premium pressure-sensitive adhesive. Persistent adhesion is provided at low and high temperatures. UV resistant, moisture resistant, heat resistant and shows good performance in any type of weather.
• Thicker than Competition: aluminum rubber tape is 33% more thicker than the competition providing a greater sealing for longer time.
• Thicker than Competition: aluminum rubber tape is 33% more thicker than the competition providing a greater sealing for longer time.
• Sticks to Any Surface: waterproof butyl tape easily sticks to any type of finish, just ensure surface is clean of debris.

• Set Of 1
• Quilt basting adhesive spray
• Size: 5. 6oz

• Polyester based thixotropic transparent glue
• Fast setting and curing time
• Easy to apply and polish
• Good UV stability
• Colors can be mixed as per desired shade