Chemical Additives By MG Chemicals

• 2: 1 mix ratio
• 15 minute working life
• 48 hour cure at room temperature
• Low exothermic
• Excellent dielectric properties

• Temporary, peelable
• Thixotropic, synthetic latex designed to withstand fluxing, wave soldering and cleaning
• Non-corrosive to copper, gold, silver or pre-soldered surfaces
• Opaque pink in color when applied, translucent red when cured
• Cured mask can be for masking conformal coatings

• High thermal conductivity

• Urethane conformal coating
• Easy to use
• All electronic products must be used with a step down/up converter for Indian voltage compatibility

• Extreme physical strength and chemical resistance
• Maximum service temperature of 275 degree C (527 degree F)

• Improves electrical connections between irregular surfaces, loose or vibrating parts and small gaps. Does not separate or bleed at high temperatures. Contains special corrosion inhibiting compounds
• Low Volume Resistivity: 23 ohms?cm
• Volume Conductivity: 0. 04 S/cm
• Surface Resistivity: 271 ohms?cm
• Surface Conductivity: 0. 0037 S/sq.
• Improves Automotive Connections

• Protects electronics against moisture, corrosion,fungus, dirt, dust, thermal shock, short circuits,high-voltage arcing, and static discharge.
• Maximum service temperature of 200 degree C
• Fluoresces under UV-A light
• Easy to apply and can be handled in only 10 minutes
• Validated for selective robotic coating equipment

• Allow precise application directly where you need it
• Provides homogeneous mixture of low to medium viscosity 2-part systems
• For use with: 832C-450ML and 832HD-400ML Dual Epoxy Cartridges

• Provides superior protection from impact, shock, conductivity, moisture, abuse, chemicals, and analysis
• Two part epoxy, with a 1 to 1 mixing ratio by volume
• Two hour working time
• Suitable for large production runs
• Excellent machining properties

• Epoxy mold release
• Non-Silicone
• It allows for a clean removal of the cured epoxy
• For use with all types of epoxies and phenolic resins
• packed included 1pc

• Repairs foam surrounds, cones and more
• A quick drying adhesive that is specially designed for speaker repair
• It forms a hard, durable and vibration resistant bond with minimal shrinkage
• Comes with Easy Brush Cap applicator
• Direct cross to Moyen Speaker Repair Adhesive Part No. RS-3087

• Useful for high voltage applications
• Insulates components circuits and assemblies
• Excellent arc and corona resisting properties; Comes with Easy Brush Cap applicator
• Protects motor windings and coils from arcing and discharge
• Protects against moisture and oxidation