Construction Chemicals - Chemical Additives

• Pioneer Pro Builders Bond is a solvent based high strength construction adhesive.
• It bonds wood, concrete, cement board, metals, masonry, ceramics and glass
• Reduces the need for screws and nails
• In the Box - 1 Cartridges of the Bond.
• Excellent product imported from Philippines. Strongly recommended to be applied with the help of an experienced carpenter only

• The non-adhesive side exhibits excellent features of polytetrafluoroethylene (PTFE) such as desirable electrical properties and resistance to heat, weather, chemical, and water (water-shedding)
• Non-adhesiveness
• Superior tensile strength.
• Superior flame resistance

• High QualityMATERIAL -- Made of Polyester cloth base with strong acrylic pressure sensitive adhesiveMATERIAL, this automotive high temperature wiring harness tape has strong ability of corrosion resistance, oil resistance, high and low temperature resistance, wear resistance.
• High Viscosity & Good Flexibility - High viscosity, no hazardous substances, automotive high temperature tape wiring harness tape has good flexibility, anti-tear. Low temperature is not hard, easy to operate, has excellent stain resistance,aging resistance, also has a certain isolation minus sound effects.
• Easy To Operate -- Adhesive high noise resistance heat proof chemical fiber fabric electrical tape is widely used in the area near the engine,battery or on normal wire harness.Hand tear, easy to operate, winding harness, specifically for the automotive industry.
• Wide Application -- Ideal for automotive interior parts of the harness use noise reduction, such as the dashboard wire harness and main harness wound.Also can be used in the engine compartment and the passenger compartment harness machine after conversion winding insulation and protection.
• Best Choice -- Wire harness automotive cloth tape is designed for bundling and wire protection against abrasion. The main application field is the engine compartment of a car, with demanding temperature-related and environmental conditions.Have any question about it,contact with us to get help.

• Stainless and easy to clean
• Easy to mix and apply
• Provides excellent chemical resistant property
• Provides hygenic, hard weating & impervious properties Non- cracking or powdering Non-toxic & restricts entry of bacteria / dirt Can be cleaned after application with a damp sponge
• Dosage : Depend on size and width of joint

• High compressive tensile and flexural strength to give them longevity

• Stainless and easy to clean
• Easy to mix and apply
• Provides excellent chemical resistant property
• Provides hygenic, hard weating & impervious properties Non- cracking or powdering Non-toxic & restricts entry of bacteria / dirt Can be cleaned after application with a damp sponge
• Dosage : Depend on size and width of joint

• NON STICK : Non-stick cookware is a common application, where the non-stick coating allows food to brown without sticking to the pan. Non-stick is often used to refer to surfaces coated with polytetrafluoroethylene (PTFE), a well-known brand of which is Teflon.
• FOOD GRADE : Teflon PTFE is FDA Food Grade compliant. PTFE resins have an upper service temperature of 500? F (260 C) and is one of the most widely used fluoroplasticMATERIAL
• HEAT RESISTANT : Teflon (PTFE) Teflon is most widely known for its non-stick properties as it has one of the lowest coefficients of friction against any solid known to man. But it also has a large operating temperature range, with enough thermal stability to be used between -328?F and +500?F without degrading.
• CHEMICAL RESISTANT : Polytetrafluoroethylene (PTFE) is a durable and flexible elastomer of average tensile strength but remarkable chemical resistance, as well as excellent thermally and electrically resistive properties. At a molecular level, PTFE consists of a chain of carbon atoms with two fluorine atoms bonded to each carbon.
• NON FLAMMABLE : Polytetrafluoroethylene (PTFE) is a totally fluorinated polymer which is white, semi-opaque, and semi-crystalline. It has excellent chemical resistance, is unaffected by nearly all chemicals, and has a very high oxygen index (i.e. is inherently non-flammable).

• Premium quality
• High performance
• Easy to use

• Number of items: 1
• Included components: gums powder

• Protects electronics against moisture, corrosion,fungus, dirt, dust, thermal shock, short circuits,high-voltage arcing, and static discharge.
• Maximum service temperature of 200 degree C
• Fluoresces under UV-A light
• Easy to apply and can be handled in only 10 minutes
• Validated for selective robotic coating equipment

• Allow precise application directly where you need it
• Provides homogeneous mixture of low to medium viscosity 2-part systems
• For use with: 832C-450ML and 832HD-400ML Dual Epoxy Cartridges

• Premium quality
• High performance
• Easy to use

• Water resistant cementious tile joint filler for all tiles
• Hard wearing, Non-dusting tile Joints
• Water resistant property - Doesnot allow moisture & water to seep into back of the tile causing dislocation, Easy to use and clean
• High compressive tensile and flexural strength to give them longevity
• Can be used with Unitint and Piditinit with this shades

• Directions for use: Part A and B need to be mixed thoroughly in the correct volume ratio for 1 minute before use. Gel time of the mixed product is 4-6 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.

• PERFORMANCE: Simple and fast application. Highly flexible and Vapour permeable
• SUPPORTS: Excellent adhesion to concrete, brickwork, corrugated asbestos, bitumen,asbestos cement sheet and metal decks. Suitable for all types of roof slabs (flat and sloped), RCC, asbestos, lime terraced roofs and clay tiles
• USE: Sunshades, it suitable as a heat reflective coating on bituminous membrane
• APPLICATION: Applie with brush or roller. Algae and fungi resistant and crack-filling
• DURABILITY: Ultra violet rays and weather resistant. It is eco friendly

• Water resistant cementious tile joint filler for all tiles
• Hard wearing, Non-dusting tile Joints
• Water resistant property - Doesnot allow moisture & water to seep into back of the tile causing dislocation, Easy to use and clean
• High compressive tensile and flexural strength to give them longevity
• Can be used with Unitint and Piditinit with this shades