Construction Chemicals - Chemical Additives

• Features a 3/4 roll of high-tack masking tape combined with a .5 mil thick, chemical-grade, high density plastic drop cloth film.
• Transparent plastic film is tear resistant and utilizes static electricity to ensure complete surface protection! Attract dust and stray droplets and keep them off your car/floors.
• Easy to install by hand. Tape stays in place for up to 14 days. UV resistant for 7 weeks!
• Suited for interior or exterior use and as a masking film for spray-based cleaners or paint. Great for automotive or home renovation applications.

• Extremely strong, retains its strength above or below water line; Stays flexible; Allows for structural movement
• Has excellent resistance to weathering and salt water; High performance polyurethane adhesive or sealant becomes tack-free in 48 hours, cures completely in 5-7 days; Strong seal retains strength above or below the water line
• Excellent resistance to weathering and saltwater; Marine, general industrial; Bonding, attaching and assembling

• Number of Wraps Required - 8 (min) for High Pressure
• Heat resistance - 1197?F / 647?C
• Works on any pipe orMATERIAL/li>
• Leaking Steam Lines & Fittings
• Clear plastic clamshell packaging with three color insert and instructions.

• Heat Resistant

• NON STICK : Non-stick cookware is a common application, where the non-stick coating allows food to brown without sticking to the pan. Non-stick is often used to refer to surfaces coated with polytetrafluoroethylene (PTFE), a well-known brand of which is Teflon.
• FOOD GRADE : Teflon PTFE is FDA Food Grade compliant. PTFE resins have an upper service temperature of 500? F (260 C) and is one of the most widely used fluoroplasticMATERIAL
• HEAT RESISTANT : Teflon (PTFE) Teflon is most widely known for its non-stick properties as it has one of the lowest coefficients of friction against any solid known to man. But it also has a large operating temperature range, with enough thermal stability to be used between -328?F and +500?F without degrading.
• CHEMICAL RESISTANT : Polytetrafluoroethylene (PTFE) is a durable and flexible elastomer of average tensile strength but remarkable chemical resistance, as well as excellent thermally and electrically resistive properties. At a molecular level, PTFE consists of a chain of carbon atoms with two fluorine atoms bonded to each carbon.
• NON FLAMMABLE : Polytetrafluoroethylene (PTFE) is a totally fluorinated polymer which is white, semi-opaque, and semi-crystalline. It has excellent chemical resistance, is unaffected by nearly all chemicals, and has a very high oxygen index (i.e. is inherently non-flammable).

• Enhancing the properties of mortar, concrete, grout, cement slurry
• Permite waterproofing of roof slab, sunken slabs, basements, water tanks, sunshades
• Used as a bonding agent for uses in repair and plastering
• UV resistant & suitable for external coating
• May be used as an additive to cement based paint improves impermeability, water repellence and anti fungal property of the painted surface

• TRANSPARENT : This adhesive Glue becomes transparent after use and will not turn yellow over time. Suitable for tiles, bricks, concrete, wood, metal, PVC, etc., without causing surface damage
• EXCELLENT QUALITY : Made of high-qualityMATERIAL, friendly to the human body and the environment, non-toxic. It has been tested and approved and has a long duration. It will not harm humans or surfaces
• WIDE RANGE OF APLICATIONS : This product can be directly painted on the wall/ceramic tile, stone, cement foundation, not peeling, powder, effectively prevent the substrate seepage, long service life. wall seepage, roof seepage, exterior walHl seepage, etc. It is suitable for sealing gaps, seams, and leaks and can be used on all buildingMATERIAL.
• DURABLE : Help save time, money and energy because it can guarantee long-term protection after use. It is waterproof, ensuring maximum performance and accepting paint
• PROTECTIVE COATING : It has strong adhesion and sealing effect, which is immediate and lasts for many years. Protect surfaces from water and various liquids, ultraviolet (UV) radiation, and other harmful chemicals. Prevent any damage caused by corrosion.

• CHEVETOL Chemical Injection Mortars CHE-OXYGLUE-50
• The CHE-OXYGLUE-50 is a 2-component injection mortar based on Pure Epoxy.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The injection cartridges are quick and easy to use with the CHEVETOL OxyGun dispensing tool.
• Storage and transportation temperature - min. 5 degree C & max. 25 degree C

• Low temperature solder paste with non clean flux
• Melting point: 138 degree c [280 degree f]
• The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 ?m) particle sizes
• Store refrigerated between 210 degree c [3550 degree f] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use
• Rohs compliant

• Heat Resistant

• PERFORMANCE: Improves properties of cement slurry, mortar and concrete for new construction as well as refurbishment work
• SUPPORTS: Excellent bonding with most of the substrates. Suitable for waterproofing of terraces, slabs, balconies & basements, water tanks, sunshades, sunken toilets, swimming pools and other wet areas
• USE: Easy to apply by brush, slurry consistency. It may be brought into contact with potable water when protected with a screed
• DURABILITY: UV resistant & Crack Bridging Property. Durable and hard wearing surface on application
• Consumption : Cement slurry coating: 0.4 - 0.5 kg/m? for two coats / Brush topping: 0,65 - 0,7 kg/m? for 1.5mm thickness

• Hydrophobic
• UV resistant and weather resistant
• No need to apply primer
• Reduces heat conductivity
• Solvent free and low VOC

• Hair Wig Glue, Extra Hold is an Acrylic based clear non-yellowing formula. The maximum wear of this product last for 2-4 Weeks.
• This product is Skin Friendly and Waterproof
• You can apply this product to any hair system, toupee, patch, wig, extension, and human hair
• 101ml Bottle and Pack of 1
• Allow dry before placing the system on your head. (Instruction on how to use it on the backside of the bottle, please read everything carefully.)

• Easy to use and clean

• NON STICK : Non-stick cookware is a common application, where the non-stick coating allows food to brown without sticking to the pan. Non-stick is often used to refer to surfaces coated with polytetrafluoroethylene (PTFE), a well-known brand of which is Teflon.
• FOOD GRADE : Teflon PTFE is FDA Food Grade compliant. PTFE resins have an upper service temperature of 500? F (260 C) and is one of the most widely used fluoroplasticMATERIAL
• HEAT RESISTANT : Teflon (PTFE) Teflon is most widely known for its non-stick properties as it has one of the lowest coefficients of friction against any solid known to man. But it also has a large operating temperature range, with enough thermal stability to be used between -328?F and +500?F without degrading.
• CHEMICAL RESISTANT : Polytetrafluoroethylene (PTFE) is a durable and flexible elastomer of average tensile strength but remarkable chemical resistance, as well as excellent thermally and electrically resistive properties. At a molecular level, PTFE consists of a chain of carbon atoms with two fluorine atoms bonded to each carbon.
• NON FLAMMABLE : Polytetrafluoroethylene (PTFE) is a totally fluorinated polymer which is white, semi-opaque, and semi-crystalline. It has excellent chemical resistance, is unaffected by nearly all chemicals, and has a very high oxygen index (i.e. is inherently non-flammable).