Tiles Adhesives By Calvana

• 2-in-1 Pool Epoxy: We combine the resin and hardener into one bar so whenever you need a waterproof and moldable substance to repair all items around your pool, just cutting, kneading, and applying. Our putty stick is heat, oil, and solvents resistant that can be working on concrete, ceramics, metals, and wood.
• For Underwater Swimming Pool Plaster Repairs: 1) Clean the area to be repaired by removing all loose particles, algae, and slime. 2) Cut and knead the putty stick thoroughly, above water, until the putty is uniform in color. 3) Apply the mixed putty at least 1/16 thick on the area, press firmly for best adhesion.
• For Abovewater Swimming Pool Plaster Repairs: 1) Clean the area to be repaired by removing all loose particles, rust, and grease, roughen surface with sand paper or wire brush for best adhesion. 2) Cut and knead the putty stick thoroughly until the putty is uniform in color. 3) Apply the mixed putty at least 1/16 thick on the area, press firmly for best adhesion.
• Pool Pump Repairs: The MTA (Male Threaded Adapter) in front of the pump could be shrank when pool pumps overheat, which causes the pump to draw air and water, especially if the pump is mounted above the water level. It comes our putty stick to save the day! Repeat the putty mixture process and apply a good amount into the junction of the adapter and the threaded port, done.
• Product Specifications: Heat Range: -20-300F | Working Time: 3-5 min | Curing Time: 60 min | Hardness: 75-90 | Density: 2.18 m/cm3 | Tensile Shear Strength: 500-800 PSI | Compressive Strength: 6650-12000 PSI | Adhesion Level: High.