Construction Equipments - Testing Equipments

• MATERIAL - The PVC cube mold is made of polyvinyl chloride (PVC), a thermoplastic material that is durable, lightweight, and resistant to corrosion, chemicals, and weathering.
• SIZE - The PVC cube mold is designed to produce concrete cubes of a specific size, typically 150 mm x 150 mm x 150 mm, with an accuracy of ?0.2 mm.
• SHAPE - The PVC cube mold has a cuboid shape, with four straight sides and square corners, to ensure that the concrete cubes produced are uniform and consistent in shape.
• SMOOTHNESS - The PVC cube mold has a smooth surface finish, which helps to ensure that the concrete cubes produced have a smooth and even surface that is free from defects or imperfections.
• STURDINESS - The PVC cube mold is designed to be strong and durable, with a high level of rigidity and resistance to deformation, to ensure that it can withstand the high pressures and stresses involved in the concrete testing process.

• Various models with different impact energies to cover a wide range of applications
• Proven durability and compared with low copies
• Established Indian Made accuracy and reliability
• Only rebound hammer that provides a test result at compressive strengths below 5 Mpa
• Impact Energy: 2.207 Nm (N), 0.735 Nm (L) 10 to 70 N/mm2 (1'450 to 10 ft 152 psi)

• Improved pointer design, easy to adjust friction and more stable.
• Adopt CNC machining center and other machine tools to refine the movement, and the rebound value is guaranteed.
• Finely grind the spherical zero-setting screws to make the rebound firing smoother and smoother.
• Abrasion resistance of super-hard 6061 aluminum alloy casing, and the button is not easy to fall off by stretching process.

• It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm.
• The Apparatus consists of one slump cone with handles and foot pieces.
• The slump cone has internal dimensions 20cm. dia at base 10cm. top dia. and 30cm height. Foot pieces can be fixed to the clamps on the base plate. The base plate has lifting handle for easy transportation. One graduated steel rod 16mm dia x 600mm long, rounded at one end and graduated in mms, is also supplied. Color Blue

• Finely grind the spherical zero-setting screws to make the rebound firing smoother and smoother.

• Slump Cone Test Apparatus
• It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm.
• The Apparatus consists of one slump cone with handles and foot pieces.
• Sold And Manufacture By IHE

• Improved pointer design, easy to adjust friction and more stable.
• Adopt CNC machining center and other machine tools to refine the movement, and the rebound value is guaranteed.
• Finely grind the spherical zero-setting screws to make the rebound firing smoother and smoother.
• Abrasion resistance of super-hard 6061 aluminum alloy casing, and the button is not easy to fall off by stretching process.

• All four interior faces as well as the base plate has been precisely casted with distance between opposite faces & height of mold = 150 ? 0.2 mm
• Each Cube Mold has been quality checked and oiled from inside to avoid rusting of the product even when not in use.
• To cast cubes of concrete for determination of quality of concrete as laid down
• Material for construction of moulds is Cast Iron or Mild stee
• Contains : 1 Pc | Size- 5 x 5 x 5 CM | Rugged design | Highly strength | Best quality.

• Rugged design | Highly strength| Best quality | Size -15x15x15 cm.
• For the metric size cube molds, the faces are machined flat to ?0.02mm accuracy and finished to within 0.2mm
• Precision engineered range of Concrete Cube Mold that is widely used for cement testing purpose.
• This equipment, especially designed and fabricated for testing of the cement is complete hassle free performance.
• The mold for the specimens must be made of cast iron or cast steel

• Highly strength| Best quality
• For the metric size cube molds, the faces are machined flat to ?0.02mm accuracy and finished to within 0.2mm
• Precision engineered range of Concrete Cube Mold that is widely used for cement testing purpose
• This equipment, especially designed and fabricated for testing of the cement is complete hassle free performance.
• The mold for the specimens must be made of cast iron or cast steel

• The moulds for the specimens must be made of cast iron or cast steel
• The inside faces must be machined plane
• The cube mould is normally made in two halves to facilitate removal of the concrete cube without damage.

• Precision engineered range of Concrete Cube Mold that is widely used for cement testing purpose
• This equipment, especially designed and fabricated for testing of the cement is complete hassle free performance.
• The mold for the specimens must be made of cast iron or cast steel

• Improved pointer design, easy to adjust friction and more stable.
• Finely grind the spherical zero-setting screws to make the rebound firing smoother and smoother.
• Adopt CNC machining center and other machine tools to refine the movement, and the rebound value is guaranteed.
• Abrasion resistance of super-hard 6061 aluminum alloy casing, and the button is not easy to fall off by stretching process.