Industrial & Scientific Store - Abrasive & Finishing Products

• Premium Aluminum Oxide
• Latex Paper
• Phenolic Resin

• SHANK SIZE: R8
• DRAWBAR THREAD SIZE: 7/16x20UNF
• ARBOR DIAMETER: 3/4
• Hardened and ground
• Prevents run-out of your cutting tools

• MULTIPURPOSE - designed for aggressive removal on urethane epoxy, waterproofing membrane, pool deck coating, thick mastic, paint or VCT/carpet glues
• SEGMENT TYPE - 6 quarter round PCD segments
• ARBOR SIZE - 5/8\"-11 threaded arbor
• WET OR DRY - recommended to use wet or dry with angle grinders

• Size - Grit: 280 Grit, Total Size: 11 x 9 Inch(L*W), Package Content: 100pcs x Silicon Carbide Sandpaper. This sand paper can provide a more effective dry wet polishing effect.
• Material - The hand sander is made from silicon carbide, which ensures sharpness and resists clogging, load and abrasion, providing the ability to cut quickly and smoothly. The back is made of C-weight kraft paper, which is soft, wear-resistant and not easily soluble in water.
• Features - The surface particles of the sanding paper are tightly packed and evenly distributed to ensure efficient and even grinding, helping eliminate bumps or uneven surfaces and making it less likely to scratch the contact surface.
• Applications - The polishing sheets can be used to sand and polish wood, metal, plastic, stone, etc. Widely used in wooden furniture manufacturing, metal processing, metal sanding, handicraft production, car polishing, etc.
• Notice - Use appropriate safety equipment, such as goggles and a dust mask, to protect against flying debris and dust particles during sanding.

• PERFORMANCE - A perfect 50mm carbide wheel that provides a smooth carving experience for wood carving and sanding with its large, round cutting teeth
• VERSATILITY - With its tungsten carbide teeth, this woodcarving disc is strong and versatile, allowing you to create in all directions - from rough shapes to fine detail jobs
• QUALITY - ARBORTECH wood tools are high quality, innovative and durable. Angle grinder disc convinces with its sharp, rotatable and replaceable carbide teeth
• TOOLS - Carving tool can be used with the ARBORTECH Mini Carver, Mini Grinder and Mini Grinder Trade
• SUPPLY - In addition to the hard metal milling cutter for angle grinders, the supply includes a Torx wrench, an Allen wrench and a washer and a M5 screw

• Achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing using our Abrasive Buffing Wheel Set.
• Our set includes 50 pieces of 25mm abrasive wheels with 5 different grits (Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit), each with 10 pieces, making it perfect for all types of detail work in both hard and delicate materials.
• The shanks are 1/8 inch (3mm) and the buffing wheels are 1\" in diameter, making them convenient and practical for efficient polishing of metal and non-metallic materials in small areas of rust deburring and surface polishing.
• Our buffing wheels are compatible with most rotary tools, making them a versatile and cost-effective polishing tool for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, and removing oxide.
• These polish wheels are also great for polishing jewelry or other metal working uses, and can be used with a tool, fit for rotary tools grinder etc. They are perfect accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel, and more.

• Resistant mesh structure with high-tear resistance and edge stability for perfect results right down to the smallest detail without scratches and without rework
• The perfect solution for machining that produce a large amount of dust. The net structure enables dust extraction across the entire surface. This leads to reduced clogging and a long service life.
• Simple positioning of the sanding disc on the pad, because no hole pattern has to be followed.

• Resistant Mesh Structure With High-Tear Resistance And Edge Stability For Perfect Results Right Down To The Smallest Detail Without Scratches And Without Rework
• The Perfect Solution For Machining That Produce A Large Amount Of Dust. The Net Structure Enables Dust Extraction Across The Entire Surface. This Leads To Reduced Clogging And A Long Service Life.
• Simple Positioning Of The Sanding Disc On The Pad, Because No Hole Pattern Has To Be Followed.
• Country Of Origin: China

• Resistant mesh structure with high-tear resistance and edge stability for perfect results right down to the smallest detail without scratches and without rework
• The perfect solution for machining that produce a large amount of dust. The net structure enables dust extraction across the entire surface. This leads to reduced clogging and a long service life.
• Simple positioning of the sanding disc on the pad, because no hole pattern has to be followed.

• DESIGNED FOR CLEAN SANDING: The 3M Xtract proprietary multi-hole pattern provides superior dust extraction to prevent loading, help increase productivity, and provide a cleaner work environment
• WORKS WELL ON MANY SURFACES: Suitable for use on all metals, aluminum, carbon steel, composites, wood, fiberglass, gelcoat, topcoats, and paint
• QUICK AND EASY DISC CHANGES: The 3M Hookit attachment system allows for easy disc changes and helps optimize disc life
• OPEN COAT CONSTRUCTION: Open coat construction and load-resistant coating prevent clogging to optimize cut throughout the life of the disc
• COVERS A WIDE RANGE OF APPLICATIONS: Choose from grades between 80+ and 400+ to handle applications ranging from finishing to coarse sanding, excelling at stock removal
• For industrial/occupational use only. Not for consumer sale or use.