Industrial & Scientific Store - Abrasive & Finishing Products

• 500-HR grit/29.4 micron
• 8.5 x 3 x 0.75 inches
• Lasts longer than other waterstones
• No need to soak before using - the original splash and go stone
• Complete instructions included

• High temperature insulation .
• End-use temperature ?Under 1700 degree C
• Rigidity: 6-7 ohms
• Electrical resistivity: 0
• Softening point: 1730 degree C

• PREMIUM VERSATILITY: Abrasive belt tools can be an economical, efficient way to blend welds, grind through bolts, remove seam sealer, and scuff grooves and contours; especially in hard-to-reach areas.
• CONTACT ARM FEATURES: Contact arm assembly 1\" diameter by 3/8\" wide. Platen pad-free; Use radiused rubber contact wheel. Use belts 1/4\" (6 mm) or 1/2\" (13 mm) wide by 24\" (610 mm) long.
• CONTACT ARM VARIETY: Wide variety of belt tool contact arms, with abrasive belts ranging from 1/8\" - 2\" wide. Over 80 arm varieties enable access in tight areas with ways to present abrasives.
• ESSENTIAL ACCESSORIES: Dynabrade accessories provide various benefits to a work station. Dynabrade tools have to operate efficiently & be durable in industrial applications.
• THE DYNABRADE DIFFERENCE: A reputation for excellence in the design and manufacturing of pneumatic abrasive power tools. We listen. We observe. We OPTIMIZE.

• SHARPEN THE DULLEST OF BLADES Our dual knife sharpener wet stone set works on all metal blades. The 1000 grit stone sharpens the edge by raising the burr. Polish it with the fine 3000/6000 grit stone.
• WHETSTONE WIDELY APPLICATION Our professional-grade knife sharpener stone is durable and doesn't wear out easily which works with any style knife and comes with a coarse and a fine side. It can used for carbon steel/stainless steel knives, scissors, razors, shears, sickle, variety of cutlery, even axe, chisel. They can be polishing with whetstone, getting an edge sharp, keep good work.
• EASY TO USE Whetstone knife sharpener are lubricated with water, no expensive grinding oil needed. Before using whetstone, you need to soak the stone 10-15 minutes and they are ready to use. The sharpening stone is not to cracked. When you sharpen your knife, you can add water on it, water the lubricating effect of grinding results will be better and will help you save time and increase the sharpness of the blade.
• PERFECT GIFT Both professional and home chefs can't do without razor-sharp knives. Our knife sharpening system is a thoughtful present for special occasions.
• LIFETIME WARRANTY Every Whetstone is backed by superior quality and under strict quality inspection. Our aim is 100% satisfied customers. Return it anytime and get a full refund when you are not happy with our knife set.

• For Use With Mounting Brushes with a 5/8\"-11 UNC Nut to other Threaded Spindles
• 5/8 IN-11 UNC Fixed Thread Size
• Compatible with Right Angle Grinder
• Specifications: Adapter, 5/8\"-11 Unc To 3/8\"-16\"
• Engineered to provide cost-effective use specifically designed for the professional, providing a cost-effective price

• 8 Inch x No Hole | 25 Pack | Grit: 36
• Premium reddish-brown Aluminum Oxide grain on heavy duty E-weight paper backing
• Hook & Loop backed sanding disc for use with backup pad
• Exceptional results in dry sanding and finishing applications for wood, auto body, marine, paint, primer, metal, plastics, fiberglass and composites Specially engineered for your tough applications
• Professional Grade - German Quality

• Product Type :Auto Accessory
• Package Dimensions :6.5\" L X4.25\" W X18.75\" H
• Country Of Origin :United States
• Package Weight :8.0Lbs

• FUNCTION CBN grinding wheel is used for sharpening high-speed steel woodworking tools.
• APPLICATION This grinding wheel is suitable for most bench grinders. Idea for objects sharpening and contour grinding.
• PREMIUM MATERIAL Our diamond grinding wheels are coated with high density diamond. The high-quality diamond and durable steel base provide a long service life. No worry about deformed.
• EFFICIENT TOOLS Premium and durable diamond makes our grinding work easier more efficient. Good choice for CBN grinding wheel.
• SIZE Diameter : 6\", Arbor Hole: 1/2\", Thickness: 1\", Grit: #320.

• INTRODUCTION: WTTTOOLS CAT40 45?Pull Studs are strictly produced per Japanese standard MAS403. Each pull stud is tested thoroughly which ensures the quality of the pull stud.
• HIGH QUALITY: Adopted high quality low carbon alloy steel 20CrMnTi with heat treatment HRC53-60. Resistant to wear and durable which fits well on your CNC Machine and improve your working Efficiency.
• EQUISITE WORKMANSHIP: Processing thread after carburizing and quenching makes thread accurate which improves corrosion resistance and be more durable, highly extending the service life and reduce loss of this kind of pull stud.
• HIGH PRECISION: Mass production. And in order to improve efficiency and reduce wear resistence, all of our pull studs have passed serious test before sending from our factory.
• CARING SERVICE: Your pull stud retention knob have passed serious test such as nut wear test, salt spary test before sending to you. We are the manufacture of these machined tools since 2004, and have set up professional centers. If you have any problems, pls pm us via Amazon, we will try our best to make each customer satisfied. If you need other type of pull stud, pls pm us directly.

• Combination Diamond Sharpening Stone 8\" x 3\" 300 and 1200 Grit
• Sharpens all flatness guaranteed precision steel

• A very useful set of brushes for cleaning, deburring
• Perfect for cleaning, deburring, edge blending
• 12 x Flat brushes - 2 inch and 4 inch
• 2 x Cup Brushes - 2 inch and 3 inch
• 6mm shank so suitable for use with any drill

• 6 inch X No Hole PSA adhesive sticky back sanding disc roll
• Premium gold Aluminum Oxide grain on C/D-weight paper backing with anti-loading/clogging features
• PSA Adhesive Sticky backing for easy to use sanding projects
• Stick self adhesive sanding disc to appropriate back up pad attached to an orbital or DA disc sander
• Exceptional results in dry sanding and finishing applications for wood, auto body, marine, paint, primer, metal, plastics, fiberglass and composites.
• Professional Grade German Quality

• Ultra thin metal cutting discs in 7-inch diameter which cut faster than conventional discs by virtue of their reduced thickness.
• The amount of removed metal is reduced, increasing cutting speed and reducing the heat generated
• Ideal for thin-walled profiles and sheet metals in structural and container work. Is often used in car-body building. Suitable for stainless steel as well.
• Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time.
• Comes in pack of 25 cutting discs at an attractive price.

• PACKAGE INCLUDES : 7 pieces 12mm / 1/2'shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches.
• Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.
• 7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc.
• 14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.

• THE TRUSTED BRAND: For use on straight grinders, stationary bench or pedestal grinders, and buffing lathes
• REDUCED WIRE BREAKAGE: Crimped filaments help reduce wire fatigue caused by vibrations, bending, and flexing
• GREAT UNIFORM BRUSHING: Gives consistent brushing as filament tips expose fresh cutting edges with normal use
• NO CORROSION: Stainless steel fill brushes are great for working on stainless steel or aluminum surfaces
• MADE IN THE USA: Wheel dia 6 in, width 3/4 in, fill dia .006 in, trim length 1-7/16 in, max rpm 6000