Hardware Adhesives & Sealers By System Three

• Features a convenient 2:1 mixing ratio
• A solvent-free, unfilled, epoxy system
• Use for almost all epoxy applications
• 30 minutes (100g mixture) gel time at 77?F (25 degree C)
• 4-6 hours (100g mixture) tack free time thin film at 77?F (25 degree C)

• Cold Cure

• Premium Epoxy: Clear Coat is an extremely low-viscosity, water-white, penetrating 2-part epoxy resin
• Measure And Mixing: Add 2 parts clear resin and 1 part hardener to a clean graduated mixing cup, combine the components, then mix until the resin and hardener turn from cloudy to clear
• Versatile Application: This fiberglass resin is ideal when used as a coating and laminating resin in marine settings and woodworking applications; Clear coat can be used with a wide range of paint and topcoat options
• Curing: This clear epoxy resin cures to a brilliantly clear, tough finish without the usual amine blush associated with some epoxy resin films; Clear Coat contains no solvents
• Tips And Tricks: Uncured marine epoxy can be cleaned up with lacquer thinner, denatured alcohol, or white vinegar; Cured product can be removed with paint stripper or softened with a heating device

• Strong

• Strong,Waterproof

• Use QuikFair on both fiberglass and wood-epoxy boats above or below the waterline
• QuikFair' s buttery consistency makes it easy to measure by weight or volume
• To ensure good adhesion, always sand QuikFair before applying additional coats of putty, resin, or other coatings/finishes
• For best results, apply at 50 deg. F or above

• Features a convenient 2:1 mixing ratio
• A solvent-free, unfilled, epoxy system
• Use for almost all epoxy applications
• 30 minutes (100g mixture) gel time at 77?F (25?C)
• 4-6 hours (100g mixture) tack free time thin film at 77?F (25?C)

• Premium Epoxy: Clear Coat is an extremely low-viscosity, water-white, penetrating 2-part epoxy resin
• Measure And Mixing: Add 2 parts clear resin and 1 part hardener to a clean graduated mixing cup, combine the components, then mix until the resin and hardener turn from cloudy to clear
• Versatile Application: This fiberglass resin is ideal when used as a coating and laminating resin in marine settings and woodworking applications; Clear coat can be used with a wide range of paint and topcoat options
• Curing: This clear epoxy resin cures to a brilliantly clear, tough finish without the usual amine blush associated with some epoxy resin films; Clear Coat contains no solvents
• Tips And Tricks: Uncured marine epoxy can be cleaned up with lacquer thinner, denatured alcohol, or white vinegar; Cured product can be removed with paint stripper or softened with a heating device

• Non Toxic

• Strong

• Strong,Waterproof