Hardware Adhesives & Sealers By WEST SYSTEM

• BASIC INGREDIENT of all WEST SYSTEM Epoxy compounds
• CLEAR low-viscosity resin formulated for West System hardeners
• HIGH STRENGTH moisture-resistant coating, bonding and filling
• ADHESIVE when mixed at proper ratio with hardener
• BUNDLE INCLUDES: West System 105A Epoxy Resin (1 qt), West System 205A Fast Epoxy Hardener (.43 pt), West System Mini Epoxy Metering Pump Set

• BLUSH-FREE 207 SPECIAL CLEAR HARDENER is an excellent choice for clear coating application. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
• THIS WATER-CLEAR EPOXY curing agent was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Mix it with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio.
• STRUCTURAL BONDING PROPERTIES are similar to other 105/20X resin and hardener combinations. Easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction.
• POT LIFE AT 72?F (22 degree C) is 20 to 26 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 4 to 7 days. Minimum recommended working temperature is 60?F (16 degree C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
• Pair with WEST SYSTEM 105-A Epoxy Resin

• Extra Slow

• Strong, Heat Resistant, Moisture Resistant, Chemical Resistant, Versatile

• WEST SYSTEM EPOXY
• 205A .43 PINT FAST HARDENER

• BASIC INGREDIENT of all WEST SYSTEM Epoxy compounds
• CLEAR low-viscosity resin formulated for West System hardeners
• HIGH STRENGTH moisture-resistant coating, bonding and filling
• ADHESIVE when mixed at proper ratio with hardener
• BUNDLE INCLUDES: West System 105A Epoxy Resin (1 qt), West System 205A Fast Epoxy Hardener (.43 pt), West System Mini Epoxy Metering Pump Set

• 406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy.
• Prevents epoxy runoff in vertical and overhead joints.
• Can be used to improve strength, abrasion resistance, and consistency of epoxy fairing compounds.
• Cures to an off-white color.

• BLUSH-FREE 207 SPECIAL CLEAR HARDENER is an excellent choice for clear coating application. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
• THIS WATER-CLEAR EPOXY curing agent was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Mix it with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio.
• STRUCTURAL BONDING PROPERTIES are similar to other 105/20X resin and hardener combinations. Easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction.
• POT LIFE AT 72?F (22?C) is 20 to 26 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 4 to 7 days. Minimum recommended working temperature is 60?F (16?C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
• Pair with WEST SYSTEM 105-A Epoxy Resin

• Extra Slow

• WEST SYSTEM EPOXY
• 205A .43 PINT FAST HARDENER