Industrial & Scientific Store - Hydraulics, Pneumatics & Plumbing

• PACKAGE CONTENTS: 1 Unit of Groz PUH/5BO/25/1-4/BSP Polyurethane Coil Hose/ Spring Air Hose
• EASY TO USE: Polyurethane coil hose offers highest flexibility and better elasticity as compared to nylon hoses which makes it easy to use
• HIGH PRESSURE: Working pressure up to 145 PSI (10 Bar) and minimum burst pressure 508 PSI (35 Bar)
• HIGHLY FLEXIBLE: Polyacetal bend restrictors and both ends crimped with solid brass swivel fittings make it highly flexible and easy to use, thus preventing regular replacements
• LIGHTWEIGHT: It is 25% lighter than rubber as well as is kink resistant which makes it easy to handle and control

• 6 Size Brass Tube Assortment Kit The assorted size brass tube set contains 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm OD, 0.2mm Wall Thickness; 300mm/11.81inch Length.2 pcs each size, totally 12 pcs.
• Premium Brass Material Made of high quality brass with polishing and passivation finish for excellent oxidation and corrosion & rust resistance, high strength, and long-lasting durability. All of brass tube are carefully selected, pls feel free to purchase!!!
• Seamless Construction Both surface and interior are very smooth without seam. The craft brass hollow tube with upgrade workmanship and precision cutting can be available in an extruded structural or a drawn seamless brass round tube for all kinds of precision.
• Weldable & Cuttable You could freely cut and punch the brass tube according to your different demands. The tubing brass is also be welded with the equipment. Convenient to use.
• Wide Application Perfect for all kinds of DIY projects, hobby model, home decoration, building model, wind chimes, frames, wine shelf, gardening decor, lighting fixtures and more. Perfect compatible with gundam car rc hobby model.

• PACK OF 2 NOS
• MATERIAL - POLYURETHANE

• Outer Diameter - 1/4 inch and Wall Thickness - 25 swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed
• Bright Annealed Finish and Inside Carbon free

• COLOUR - BLACK
• MATERIAL - NITRILE RUBBER
• PACK OF 20 PCS
• TOLERANCE - (+ - 0.05)

• The whole hose clamp are made of premium stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.
• WIDELY USED- Clamps are used in watering water pipes, car wash water pipes, gas conveying pipes, securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor.
• Durable product : These clamps are made to distribute pressure uniformly around the application zone. The spring clip maintains pressure during this process, thereby preventing leaks.

• Brass Blessing : Solid Brass Metal Dual Scale 6 Inch / 15 cm Ruler Measuring Tool 6\" - BROAD: APPROX 2.4 CM - THICKNESS: APPROX 1 MM - FULLY BRASS MADE - EXCELLENT CONDITION

• Suitable for Air Compressors , Pressure Boosting Pumps, Refrigerant Systems
• Standard Thread Size G1/4 Std BSP male
• Pressure Range 0.2 to 7.5 Bar
• Easy to Install & Use
• Also Suitable For Water Boosting Pumps

• You will get the size you choose.
• 304 Stainless steels with resist corrosion and oxidation, to resist high temperatures, easily clean.
• 304 stainless steel is a kind of universal, it widely used for production requirements of good comprehensive properties, resistance to corrosion and formability of equipment and parts.
• Products are mainly used for: aviation, antenna, model industry, chemical industry, machinery and some home decoration.

• 4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market.
• GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.
• VARIETY OF SIZES - We have included 5 most commonly used diameters ranging from 1/4\" to 3/4\". Shrink tubing is precut to 1.75 inches.
• EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds.
• DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief.

• Hydraulic tester max work pressure: 9,000 PSI/600 Bar/60 MPa, 3 test hoses, 60 inch long
• Hydraulic test point coupling: M10*1, M14 - 1.5, G1/4,UNF7/16-20, NPT1/4-18
• Hydraulic pressure test kit has 3 pressure gauge 63mm, 3625 PSI (250 Bar/25 MPa), 5800 PSI (400 Bar/40 MPa), 8700 PSI (600 Bar/60 MPa)
• Pressure gauges are used in testing the hydraulic pressure of construction machinery at all levels, equipped with engineering machinery commonly used pressure connector
• Hydraulic test kit is also used in steel, automotive hydraulic lines, ship pressure on the hydraulic system testing, widely used in automobiles, construction machinery, ships and military fields

• 1/4' INCH FRL industrial use , Connection Size is 1/4\" Quarter Inch BSP (Female) Thread
• FRL is comprised of three primary components:
• pressure regulator, air regulator, air compressor regulator,
• You will need 1/4\" inch threaded male connector for fitting the pipes
• Applicable Temperature: 5-50 degreeC Light Weight / Compact Size / Back Mounting / Plastic or Metal or No Casing (As Per Variation)

• A check valve, clack , non-return valve, reflex , retention valve or one-way valve is a valve that normally allows fluid
• Non return valve 11/ inch / 40 mm
• It is a nice product

• Quarter Turn, Lever Operated. Provided with Forged Brass Hard Nickel Plated Ball. Body rings Teflon & gland packing, PTFE Seating
• The Handle Can be Rotate at up to 90 Degree to Open or Close The Valve. It is a Threaded end Ball Valve Where It Has ? Female at the Both Side
• They are suitable for residential and light commercial applications in domestic hot and cold water systems, natural or bottled gas and compressed air systems
• Brass & Copper (57% Added) Ball Valve, UV Resistant, 100% Leak Free Tested & Resistant to chemical erosion, Aluminum Color Clotted Handle.