Industrial & Scientific Store - Hydraulics, Pneumatics & Plumbing

• Jaw Size 22mm
• Fork Ball

• Country of Manufacture: CHINA; Brand: DMiotech; Material: Silicone
• Net Weight: 74g; Package Content: 1 x Silicone Tubing; Main Color: Clear
• Product Type: Unreinforced Silicone Tubing-Peroxide Cured; Inner Dia (ID): 9mm
• Outer Dia (OD): 13mm; Wall Thickness: 1.5mm
• Opacity: Translucent; Total Length: 1M/3.3ft

• Inner Diameter - 2 inch and Wall Thickness - 16 swg
• Copper Coupling / Socket
• Pack of 1

• Outer Diameter - 1/2 inch and Wall Thickness - 20(L) swg
• Product Length : 15mtrs / 50feet per piece, Pack of 1
• Standards - ASTM B68. Copper >99%
• Temper - Soft Annealed
• Bright Annealed Finish and Inside Carbon free

• Direct Acting Solenoid Valve , Model NO \" 5515-08-6 , Media : water, Steam, Hot Water GAS, etc ,Media TEMP. : -10 oC ~150 oC,, Body : Brass, Pressure : 0-6 bar , Orifce : DN 2 , Seal : VITON , Port : 1/8\" BSPF, Reduce Adapter: 1/8\" M to 1/4\" F (2nos) , , Voltage : 230 VAC,

• Fit Pipe Size: 2\"; Overall Size: 115 x 26 x 55mm/4.53\" x 1.02\" x 2.17\"(L*W*H); Hole Diameter: 6mm/0.23\"; Mounting Hole Distance: 93mm/3.66\"
• Special slotted design makes it more sturdy and not easy to deform
• Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable
• The surface is super smooth and burr-free with the fine workmanship
• Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses

• Solenoid valve - Ac coil 220v or dc 24v coil or dc 12v Customer care - 9767029601
• 2.Service - Air, Gas, Liquid, and Vacuum CAUTION: Do not energize the solenoid coil when it is not installed onto the valve. It may cause it to overheat and create a fire hazard.
• 3.SERVICE LIFE: The service life of the solenoid valve depends on the operating conditions such as pressure, temperature, type of medium and the voltage.
• 4.ALL Standard valves are supplied with CONTINUOUS DUTY COILS of the proper class of insulation for the service indicated on the valve.
• 5.All parts of the solenoid actuator which come into contact with the fluid are made of austenitic corrosion-resistant steel. In this way, resistance is guaranteed against corrosive attack by neutral or mildly aggressive media.

• Model: 3V-210-06 ,Valve Type: 3/2 way Solenoid Valve, Coil Type: Single Coil
• Effective Cross Sectional Area: 14 sq mm CV = 0.78, Port Size: 1/8 ? NPT, Connection: Threaded
• Initial Status: Normal Close, Working Medium: 40 Micron Filtered Air, Operation: Internal Piloted ,Working Pressure: 0.15 0.8 Mpa / 22 116 psi
• Max. Tested Pressure: 1.2 Mpa / 174 psi ,Ambient Temperature: 5 50 41 122 ?,Operating Voltage Tolerance: ? 10% ,Power Consumption: 3W for DC / 3.5VA for AC Coil Protection: IP65 Insulation: F Class
• Wiring/Connector: DIN Connector Switching Frequency: 5 Cycles / Sec, Response Time: 0.05 Sec

• 1/2\" Male - 1/2\" Male.
• High quality products.
• MATERIAL: SS
• Hex Nipple for connecting two threaded pipes or fittings.

• Excellent Bonding
• High Adhesion
• Easy Dispensing
• Used To Change Direction In Piping
• Material : UPVC Plastic

• Resistant to abrasion and vibration
• Working Pressure upto 15 kg/cm2 and temperature upto 60 C
• It is ideal for use with air tools, blow guns, impact wrenches and such pneumatic tools.
• MANLON -polurethane tubings (tubes) have low weight as compared to rubber hoses.
• Pressure losses are low because of smooth internal surface of pu tubes.

• Working Medium- Air, Water, Oil, Gas
• Operating Type: Directly driven State: Normally closed
• Flow bore: 16mm CV: 4.8 Pipe Size: 1/2\"
• Operating Viscosity: Under 20CST Operating Pressure: 0-10 Kg/cm?
• Working Temperature: -5~80?Voltage: DC 12V, ?10% Valve Body: Brass

• Model: SC 40 X 50; Piston Port Size: PT1/4\"; Piston speed:30-800mm/S; Max Pressure: 1.0 MPA/145PSI
• High Strength Pistol Rod: The piston rod is made of carbon steel, chrome-plated, with high strength, low friction, rust resistant and wear resistant.
• Thickened base: A thickened base with solid framework, this air cylinder has stronger impact resistance, more stable at work.
• Action Type: Double Acting; Rod Type: Single Rod
• Fluid: Air; Working Speed Range:30-800mm/s.
• Working Temperature: -20~80 degreeC; Pressure Resistance: 13.5kgf/cm?
• Material: Aluminum; Weight - 680 Grams
• Used in Industrial Control System to Adjust the Direction, Flow, Speed and Other Parameters of the Medium Compatible: Mechanical Engineering, Automation Equipment, Hydraulic Systems, etc.
• Note: Color of cylinder can be different as shown in picture.
• Package Content : 1 x SC 40x50 Pneumatic Cylinder

• [PACKAGE INCLUDE] 5Pcs x Service/ Access Valves.
• [FITMENT] Hvac schrader valve r22 completed with a Service/Access valves / Schrader valve, or American Valve that is threaded into the steam.
• [SIZE] Air conditioner access valve Thread x OD: 1/4'' SAE x 1/4'' O.D. Length: x 4\" stem
• [PREMIUM QUALITY] The caps are made of copper, they are provided with core remover and have an inside rubber O-ring, 100% tested before shipping.
• [FUNCTION] These hvac service valves are generally used to have an easy access to the systems for vacuum, charging, pressure checkup and other applications.