Industrial & Scientific Store - Lab & Scientific Products

• DURABLE, LONG-LASTING DESIGN withstands long-term outdoor use
• WIPES CLEAN so it can be reused
• TOUGHER THAN YOUR STANDARD DRAIN COVERS! PIG-tough vinyl top resists stretching, ripping and tearing
• SUPER-SEALING BOTTOM LAYER conforms to uneven surfaces for a tight seal
• WITHSTANDS PROLONGED EXPOSURE to diesel fuel and gasoline
• USE FOR QUICK SPILL RESPONSE or leave it down for long-term drain protection where liquid transfers, washdowns or other leak- and spill- prone jobs are common
• DUPONT ELVALOY TECHNOLOGY provides lifelong flexibility plus chemical, UV and infrared light resistance to vinyl top
• HIGH-VISIBILITY yellow top layer draws attention to spills
• INCLUDES A NYLON STORAGE BAG for easy transportation
• NOTE: Elvaloy top can become slippery when wet. Please use caution

• Inductive Proximity Sensor

• ISO 4064:2014
• IP68
• Tamper proof
• Plug & Play
• No Moving Parts/No Additional wires and cable

• Innovative Design, Highly Versatile With Latest Three Step 90 Deg. Inclined Optical System On Table Clamp Stand With Cold Light Co-Axial Illumination Head
• Three Step Advance Optical System Magnification: 5x,10x & 20x Eye Pieces
• SWF 15x Paired Super Wide Field Working Dist : F=200mm Objective Lens Fine Focusing
• Manual Light Source : Halogen Lamp Light Source With 15v/150w Power .
• .Variable Continuous Intensity In Range Of Max To Minimum Arm : Counter Balanced Pantographic Arm With 320 Rotation Table Clamp Stand: Easy Handling And Absolute Stability

• Internal dimension (W D H mm) : 420?395?350
• Chamber volume (Litres) : 50
• Temperature range : RT+10 ~300 C
• Power consumption : 1100W
• Electrical requirements : 220V, 50Hz, Single phase

• 15 kV ESD Protection
• 40 to 80 C Operating Temperature
• High Retention USB Connectors
• Ultra-Compact
• USB Bus Powered

• CSA approved intrinsically safe for use in hazardous environments
• Submersible polypropylene sensor and cable for corrosive liquids
• 60VA relay selectable NO or NC via power supply wiring polarity
• Compatible with Smart Trak and Switch-Pak installation fittings
• Ideal for highly corrosive liquids

• Flexible Singleface Corrugated conforms to all shapes and sizes
• B flute -1/8\" raised fluting provides for easier wrapping and good crush resistance
• Use to protect metal and glass parts
• Made in the USA from recyclable material

• Kitchen drainage mat with microstop anti-microbial
• NSF certified, 2 year limited warranty
• 100 percent nitrile rubber red compounds for varying degrees of grease and oil resistance
• Tested and certified by the national sanitation foundation (NSF) for grease and oil protection and durability
• Lightweight design for easy handling and cleaning

• BTU Meter is a liquid heat exchange calculation device for Central Air conditioning, Besides heating calculation, it also could calculate cooling energy consumption. It collects the data from temperature sensor and flow meter, basing on Heat Exchange Principle the system automatically integrates energy consumption and transfer it to PC. It can Check Consumption Volume by tenant or Operator, real time shows instantaneous temperature, flowrate etc
• BTU meter (Model: NHM393)
• Temperature Sensors: PT100
• Flow Meter: Electro Magnetic (MODEL: FMF2040)

• Genuine OEM replacement part
• Kolpak produces freezers and refrigeration systems and accessories for the food service industry
• Genuine OEM parts provide safety, reliability, and optimal performance
• Approved by original equipment manufacturer (OEM)
• Intended only for designed and specified use

• High Speed Performance: Reach speeds of up to 20,000 rotations per minute (RPM).
• Universal Centrifugation: Versatile design accommodates various sample types and volumes.
• Carbon Material Construction: Utilizes durable carbon materials for enhanced longevity and stability.
• Precise Centrifugal Force: Generates consistent and reliable separation results for diverse applications.
• Compact Design: Space-efficient layout suitable for laboratory environments with limited space.

• Advanced i-Tronix Optical Measurement Device with 7.0 inch HD Color LCD Touch Screen for Precise Single Vision Measurements
• Compact and Lightweight i-Tronix Optical Tool - Weighs Only 6.5kg, Perfect for Efficient Eye Care Practice
• Built-in Thermal Printer in i-Tronix Device for Instant Printouts of Optical Measurements and Data
• High Precision Optical Measurement with i-Tronix: Resolution Less Than 0.05mm and Measurement Range Under 60mm
• Versatile i-Tronix Optical Device Featuring UV and Blue Light Measurement Capabilities for Comprehensive Eye Testing
• i-Tronix Optical Device Compatible with AC 100-240V Voltage for Global Use and Reliable Performance
• Easy-to-Use i-Tronix Optical Measurement Device with Intuitive Touch Screen Interface for Quick Data Entry and Navigation
• Efficient Single Vision Measuring Tool from i-Tronix - Ideal for Accurate Lens Fitting and Vision Assessment
• Portable i-Tronix Optical Measurement Device with Integrated Thermal Printer for On-the-Go Eye Care Solutions
• Professional i-Tronix Optical Measurement Equipment with High-Definition Display and Precision Measuring Features for Enhanced Eye Care

• Motor rating input: 60 watts; Motor rating output: 50 watts
• Speed range: 50-2200 RPM; Speed Display: LCD
• Max. Torque: 40 Ncm; Torque Display: LCD
• Motor overloaded protection: LED light flash, auto stop
• Protection class acc. To DIN/EN 60529: IP 42^Voltage: 220/240; Frequenc: 50 Hz^Motor protection in case of continuous overload^Stopper for protection of vessel & shaft^Special base design for topple free operation^High torque even at low speeds^Monitoring of set & actual speed

• Accurate Flow Measurement: This flow meter provides precise and reliable measurements of water flow rates within 2-inch pipes. Accurate flow measurement is crucial for various industrial, commercial, and residential purposes.
• Digital Display: The meter features a digital display that shows the flow rate in real-time. This digital display makes it easy to read and record the flow data quickly and accurately.
• Higher Capacity: The \"higher capacity\" designation implies that this flow meter is designed to handle larger volumes of water flow, making it suitable for applications where a substantial amount of water needs to be monitored or controlled.
• Easy Installation: The Water Sparks Digital Water Flow Meter is typically designed for straightforward installation. It can be integrated into existing pipe systems with minimal disruption, provided that the pipe size matches the meter's specifications.
• Calibration: Digital flow meters may require periodic calibration to maintain accuracy. Manufacturers typically provide guidelines for calibration procedures.

• Range: Ambient to 350 C | Accuracy: ?0.4 C | Bath Stability: ?0.05 C | Stabilisation Time: 15 Min. | Heating Time: 18 to 20 Min. (Ambient to 350 C) | Cooling Time: 30 to 35 Min (350 to 100 C) | Resolution: 0.1 C | Units: C / F Switchable | Display: Graphical with LED Backlight | Power Supply: 230V AC 5% / 50Hz,1.2 KW for 500 W for 350 DBC |
• Transmitter Supply: 24V DC 10% (Loop Powered) |Block Diameter: 25.4 mm | Block Depth: 120 mm | Insertion Tube Depth: 110 mm | Temperature Setting: Digital Display through feather touch keypad | Display Stability: ?0.2 C | Radial uniformity Fixed Steps for: ?0.3 C with similar probes | Switch Test: Continuity check with OPEN / CLOSE indication |
• Measuring Parameters: mA, mV, Volts, Ohms, RTD3 (Pt 100)3 | mA Range: 0 to 25 mA; Resolution: 0.001 mA; Accuracy: ?0.025% of Reading + 10 ?A | mV Range: 0 to 1000.0 mV; Resolution: 0.01 mV; Accuracy: ?0.025% of Reading + 0.25 mV | Volts Range: 0 to 10.000 V; Resolution: 0.001 V; Accuracy: ?0.025% of Reading + 3 mV | Ohms Range: 0 to 400 Ohms; Resolution: 0.01 Ohms; Accuracy: ?0.025% of Reading + 0.1 Ohm | RTD3 Range: -200 to 8500 C; Resolution: 0.10 C; Accuracy: ?0.025% of Reading + 0.30 C |
• Thermocouple Types: T, J, K, N, R, S | Thermocouple Range(T,J,K,N): -200 to 400 C; Resolution: 0.1 C; Accuracy: ?0.025 % of Reading + 1 C | Thermocouple Range(R, S): 300 to 1760 C; Resolution: 1 C; Accuracy: ?0.025 % of Reading + 1 C |
• Supply Scope: 1 Unit of DBC-01 Dry Block Calibrator, Power Cable, 1 Unit of Test Lead (2 Wire), Insertion Tube: Dual Hole - 1 x 1/4" + 1 x 12.5 mm, Dual Hole - 1 x 1/4" + 1 x 8.2 mm, 1 Unit of Insertion Tool, 2no.s of 6A Spare Fuses, Instruction Manual and Factory Calibration Certificate | Applications: Calibration Labs, Pharmaceutical Divisions, Thermal Plants, Metallurgical Plants.