Industrial & Scientific Store - Power & Hand Tools

• SHARPENED CHISEL HEADS - Accurately pre-sharpened by machine for all turning tools
• BLADE - 6.7-Inches and 5.1-Inches High Speed Steel blades outlast high carbon steel and will give you years of use
• HANDLE - 11.8-Inches and 13.3-Inches teak wood handle is harder and comfortable for using
• WOODEN BOX - Enhanced all parts includes double layer panels, enlarged structure, thickened hinge, packaging in mail box with EPE protection, to keep the turning tools and case in good condition
• CONTENTS - 1-Inches Roughing Gouge; 2-Inches Roughing Gouge

• Double Face Sledge Hammer
• Handle Design: Ergonomic
• Head Material Copper
• Handle Material Aluminum

• Torque accuracy of +/-2% CW and +/-3% CCW between 20% and 100% of wrench capability Angle settings offer +/-1% of reading of angle accuracy
• Low profile tube, 15 flex teardrop head, and flush mounted on/off switch allow for better access in tight confines
• Digitally tracks torque and angle measurements. Vibrating handle, buzzer, and LCD screen alert when target torque is reached

• 1. 5mm x 60 Degree serrations
• Steel (1050) - can be hardened
• 2 Holes
• Supplies maximum concentricity on finish turning operations
• If Jaws are Taller than standard height for your Chuck - there is a loss of Grip force - Reduce RPM during all operations; Check your Chuck Manual to figure standards for your Chuck and Grip Force diagrams

• Fit with sds max rotary hammer & demolition hammerThis 5 inch bush hammer plate is packed with a 5/8\"-11 to SDS Max shank adapter, can fit with sds max rotary hammer or demolition hammer.
• Fit with polisher & speed ajustable angle grinderTaking away the adapter, the bush hammer plate can fit with 5/8\"-11 spindle polisher or speed adjustable angle grinder. Working speed less than 2000 RPM
• Wide Use1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
• Size5 inch plate, total length with shank 9 inch. 3 pcs rollers on a 5 inch plate, each roller is welded with 30 teeth.
• WarningRotaion mode only, no impact mode, which can twist the adapter shank. Working speed under 2000 RPM, do not operate with too much pressure, which can stop the roller from running and break the shank. Rollers and shank are sold separately in actintool store, you can buy to replace the worned parts.
• WarningFitting with rotary hammer, this bush hammer tool only works in rotary mode, the high speed and little pressure can make it dig not so deep, the estimated profile close to CSP 2-3. It is suggested to fit with polisher, low speed ( under 1000 RPM) higher pressure can make it dig deeper close to CSP 4-5.

• Product Name: Multi-Functional Sandpaper Disk Benchtop Sander
• Input Voltage: AC 100-240V
• Motor Voltage: DC 24V
• Body Material: Steel
• Sticky disk material: aluminum

• 12.9\" cutting width and 5/16\" (8mm) cutting depth. Straight cut, Angle cut; \" L & ?\" cut, Rip cut and more. Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting, the deep of the throat is 115mm/4.5inch. Easy to use and to carry around.
• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Can not cut laminate flooring and other hardwood. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl plank flooring .
• Patented product, all rights reserved !
• The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners?most of which are columns, door edges and wall corners). It can smoothly help you finish these. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time?
• Why does the floor you cut crack Because your floor must be Rigid Core Vinyl Plank ?SPC or RVP?, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to cut it,Each cut can only cut 1/16 inch, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
• Replacement blade can be got at the online official brand store (MANTISTOL).
• If your cutter cannot cut an 8mm floor, please remove the blade and reassemble it, almost because the blade back does not fit the blade holder.

• The Drag Knives are universal and will fit directly into any Spindle or CNC Router Machine with a ?\" collet
• Can be configured to cut both ?" (6.3 mm) and 1/16" (1.6 mm) depth, brands like Donek you must purchase their D1 and D2 version to get both of our depths combined
• Cuts sharp corners and curves on sign vinyl, textile designs, cardboard plane, plastic, paper, wood veneer, stickers with the speed and precision of a CNC router
• Made from a heavy duty CNC milled aluminum body with black anodize finish, fits standard utility knife blades and for your protection the blade is covered for added safety
• Dog River Tools is a brand you can trust, we stand behind every product. Our tools are used by people in the industry and DIY Hobbyist

• 3 in 1 Sander This multi-purpose sander includes 10 1.2\" x 15\" sanding belts and 10 6\" sandpapers, which can grind scissors, knives, metal, wood, stone, etc. Also with spindle sander for curve grinding. This small sanding machine is suitable for home, restaurant, hotel, supermarket, vegetable market, butcher shop, etc.
• Disc sanders This 6-inch sander is professional for grinding all kinds of scissors, such as barber scissors, kitchen scissors, manicure scissors, tailor scissors,etc. Also efficiently grinding scissors/metal/wood/stone, etc.
• Mini belt sander electric This 1.2\" width and 15\" length belt sander is a professional tool to grind various knives, which is easy to sharpen knives, and can also grind small wood/metal materials, etc.
• Fast curve grinding This 0.8\" and 1.6\" diameter mini spindle sander machine professionally grinds the arc shape, the grinding is fast and effortless, and the arc shape is easily achieved!
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• Pliers
• Slip Joint Pliers
• Slip Joint Plier
• Max. Jaw Opening 1 1/4 in
• Jaw Width 15/32 in

• Three functions: spot welding, lithium battery detection, and charging.
• Microcomputer control 199 (99*1; 99*2) precise welding parameter setting.
• Single pulse, double pulse ultra-fast welding selection mode.
• All adopt the knob-type fast-adjusting pulse group (16 pulse) high-current slow welding mode, which is suitable for welding thicker nickel plates.
• Equipped with 4.2V-36V 3A adjustable constant voltage and constant current charging device, which can meet most of the lithium battery charging or testing after welding.

• 18V ONE+ HP Technology Delivers Up to 40% Faster Cutting
• Over 325 Cuts Per Charge
• 0-56 Degree Capacity for Cut Versatility
• (1) Hex Wrench
• (1) Vacuum Dust Adapter
• (1) 18V ONE+ HP Brushless 7 - 1/4\" Circular Saw w/ 24T Thin Kerf Blade

• Expert Quality
• Bevel cutting jaws
• For cutting mild steel to HRC20 9mm diameter and 7mm to HRC40
• 30 offset chrome vanadium steel cutting jaws with fine adjustment