Industrial & Scientific Store - Power Transmission Products

• 1. [8-inch actuator specifications] : stroke length = 8 inches (200mm), speed =10mm/s, maximum thrust =224 Lbs (1000N), pull =132Lbs (600N), rated power =30W, IP54 protection.
• 2. [With instantaneous polarity waterproof switch] : with NO OFF NO instantaneous polarity waterproof switch, only the finger up to actively press the upper and lower remote control rod switch will move. When the finger does not press the switch, the DC load will stop.
• 3. [High quality] : linear actuator adopts high-quality aluminum, high-performance motor, smooth operation, consistent push-pull characteristics, built-in limit switch, arbitrary parking, automatic parking at the top, with self-locking function.
• 4. [Wide application] Linear actuators can be widely used in automotive installation, industrial lifting systems, robots, DIY chicken coop doors, electric beds, traction beds, electric sofas, electric lifting rods, electric booths, electric sunroofs, solar trackers, etc.
• 5. [What you'll get] : You'll get 1*24V 8-inch electric linear driver, 1* instantaneous polarity waterproof switch with 2Pcs mounting bracket. Our products are guaranteed for 18 months. If you have any questions about our electric actuators, you can contact us via Amazon email and we will respond to you within 24 hours. If you are still satisfied with the product after use, you can also consider us if you have other product needs in the future.

• Drop in heavy duty ball transfer
• Integral flange at top allows unit to be dropped into 1-3/4-inches diameter hole
• 1-3/16-inches main ball rotates on 1/8-inches support balls
• Ball support cup is machined from solid steel and is hardened and plated
• 500 pounds load capacity

• Sealed For Life Design Ensures Problem Free Operation
• Angular Bearing Contact Allows For Outstanding Durability While Supporting Both Radial And Axial Loads
• Available In Wide Variety Of Types, Designs, Sizes, And Materials
• Quality You Can Count On. Skf Has Been Making Ball Bearings For Over 100 Years

• This item is new, including original packaging!

• Power and Protection Actuator: Crafted from sturdy aluminum alloy and featuring IP54 protection, this 12 Volt actuator is a powerhouse when it comes to performance. Its robust construction ensures reliability and longevity
• Intelligent: Equipped with mounting brackets, this actuator is ready to be seamlessly integrated into your setup. Its built-in limit switches allow to stop it at any desired position, providing a self-locking function for extra convenience and safety
• Whisper-quiet Operation: Experience tranquility with our low noise design, emitting less than 42 dB of sound. Enjoy smooth and seamless operation without any disruptive noise, allowing you to focus on your work or relaxation without distractions
• Precision: With a speed of 4mm/s and an input voltage of 12V DC, this actuator delivers precise movement for your projects. With excellent load capacity of 1500N/330LBS. From woodworking to home improvement, this actuator is your ideal solution
• Wide Application: Whether it's for TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras, door actuators or more, this actuator is engineered to empower your projects

• Black Finished Large Extension Spring Assortment,
• Total 31 pieces, 16 sizes

• 3.75\" OUTSIDE DIAMETER , FITS 5/8\" SHAFT DIAMETER. 3/16 KEYWAY IS STANDARD FOR 5/8\" SHAFT, 56 OR 56H FRAME MOTORS. KEYWAY NOT INCLUDED.
• THIS CAST IRON SINGLE GROOVE PULLEY TAKES 1 BELT AND INCLUDES THE \" H \" STYLE TAPERED BUSHING
• GROOVE WILL FIT THE FOLLOWING V-BELT TYPE ( 3/8\" TOP WIDTH 3L / 3LK) (1/2\" TOP WIDTH 4L / 4LK / A / AK / AX )
• THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK.
• MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH.

• 2 Grooves Cast iron Pulley OD: 2.5\" ID: 1 1/8\" 2AK25118 2AK25

• Pillow Block Recommended for heavy, sterile applications
• Set Screw Type 304 Stainless Steel, Housing no - SP205
• Grease Zerk 440C stainless steel insert bearing
• Grade 16 Balls Mobile FM222 Food Grade Grease
• Insert Bearing comes fully sealed with a stainless steel slinger over Buna N Nitrile double lip contact seal

• Replacement for W10739670 for Whirlpool Maytag W10480711 - AP5954411 - 8540852 - W10084740 - W10480711 Shock Absorber
• MHWZ400TB00 MHWZ400TQ00 MHWZ600TB00 HWZ600TK00 MHWZ600TW00 MWFW8300SW01 MWFW8500SR01 MWFW8500SR02 WFW8200TW0
• WFW8300SW0 WFW8300SW00 WFW8300SW01 WFW8300SW02 WFW8300SW03 WFW8300SW1 WFW8400TB00 WFW8400TW00 WFW8400TW01 WFW8410SW0 WFW8410SW01 WFW8500SR0 WFW8500SR00 WFW8500SR01 WFW8500SR02
• 1 Year Warranty - EZA Trading OEM

• 4.25\" OUTSIDE DIAMETER , FITS 1\" SHAFT DIAMETER. 1/4\" KEYWAY IS STANDARD FOR 1\" SHAFT. KEYWAY NOT INCLUDED.
• THIS CAST IRON SINGLE GROOVE PULLEY TAKES 1 BELT AND INCLUDES THE \" H \" STYLE TAPERED BUSHING
• GROOVE WILL FIT THE FOLLOWING V-BELT TYPE ( 3/8\" TOP WIDTH 3L / 3LK) (1/2\" TOP WIDTH 4L / 4LK / A / AK / AX )
• THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK.
• MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH.

• The carefully crafted pulley has , good toughness, wear resistance, and a stable structure.
• The efficient and practical pulley has the characteristics of sturdiness and durability and a long service life.
• With a simple application method, you can easily install and remove it.
• The product has good craft details and a smooth and comfortable touch, which can serve you well.
• Adopts precision production to stable characteristics and high reliability.

• The linear actuator features adjustable stroke & adjustable speed
• Our linear actuator has a chromeplate telescopic tube of high rigidity, high hardness and good bending resistance
• Oscillating arm of large torque range, high tension for greater telescopic stroke
• Robust motor of linear actuator provides stability and reliability
• Working voltage: DC 24V; Stroke: 2-8cm; Max speed: 120rpm; Thrust: 5-25kg

• AUTOMATION EQUIPMENT: Robotics, agriculture, cabinets, home automation equipment.The TGA-75 installation and integration steps are simple and can be used for woodworking, home improvement and AV projects etc.