Industrial & Scientific Store - Power Transmission Products

• 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester
• Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA
• 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil
• Polyester layers to enable high temp and pressure than original rubber hose does .It is excellent resistance to Ultraviolet radiation, water, ozone and oxygen
• Inner Diameter: 4\" (102mm). Length: 6'' (152mm). Wall Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK.

• 12 Volt 2 Inch Stroke Linear Actuator Specification: Stroke length = 50mm(2\"); Retracted length = 155mm(6.2\"); Extended Length= 205mm(8.2\"); Travel speed = 0.39 inches/sec (10 mm/s);Maximum current draw = 3Amps; Maximum Load = 202lbs(900N).
• Material: The Linear Actuator is made of high quality aluminum alloy material, sturdy enough and with fashion look, High performance motor ,Built-in high quality limit switch.
• Low noise: The Linear Actuator Motor is with low noise design, noise level below 50 dB
• IP54 rated: (suitable for outdoor use). The linear actuator is Commonly used in automotive, medical devices and engineering industry, massage sofa, recliner, TV lifter, lifting table, electric window opener etc.
• Package Included: 1pc 12V 2 Inch Linear Actuator with 2pcs mounting brackets.

• Package Includes: 4 x Bolt-type Needle Roller Bearing.
• Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications.
• Durable, Good Quality, CF/KR Series,Male Thread type, with a cylindrical roller, have higher load capacity.
• Solid sealed. Preventing the entry of foreign matters like dust, this would extend the life of needle roller bearing.
• They are used in a broad range of fields such as machine tools, industrial robots, electronic parts machinery.

• Dimensions: Inner Dia: 10mm/0.39\"; Outer Dia: 30mm/1.18\"; Thickness: 9mm/0.35\"
• The Deep Groove Ball Bearing is made from high carbon chromium bearing steel (GCr15), so it's long-life, smooth and low noise, also has high durability and resistance to under heavy loads
• Deep Groove Ball Bearing is widely used to accommodate radial and axial loads in both directions; Can be applied to skateboard applications and 3D print projects, also suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, etc
• Bearings are sealed on BOTH SIDES to keep lubricant in and contaminants out; With small friction and high-limit speed, they are cost-effective and require little maintenance
• High accuracy class makes them suitable for almost all kinds of application

• High Quality, high tensile strength Made from Aluminium H30
• It find the application in Motion control Automation, CNC machines, encoders, DC motors, steper motors, 3D Printers
• Can be customize as per customer requirement up to maximum 14 mm

• Dimensions: (8mm X 22mm X 7mm)
• Package quantity: 12Pcs
• Low noise. High speed. High temperature resistance. Resistance to high load. Suitable for kinds of applications.
• [WIDE APPLICATION] Fit for skateboards, inline skates, roller skates, scooters, and other skating applications, also available for 3D printer wheel bearings, CNC, etc.

• Dimensions: (8mm X 19mm X 16mm)
• Package quantity: 4Pcs
• Low noise. High speed. High temperature resistance. Resistance to high load. Suitable for kinds of applications.
• [WIDE APPLICATION] Fit for skateboards, inline skates, roller skates, scooters, and other skating applications, also available for 3D printer wheel bearings, CNC, etc.

• Model: 2204
• Rod Diameter : 15mm (on which bearing rotates)
• Bearing Thickness : 14mm; Bearing outside diameter : 35mm
• Package Include: 1 x 2204 Self align Bearing

• The double Direction Thrust ball bearings can support bi-directional loads.
• The bearings with spherical housing washer can prevent static misalignment
• Interference fit- Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
• Initial misalignment- Bearings with sphered housing washer(s) can accommodate initial misalignment.
• Separable and interchangeable- The separable components Thrust ball bearings are interchangeable This facilitates mounting and dismounting, and maintenance inspections.

• The double Direction Thrust ball bearings can support bi-directional loads.
• The bearings with spherical housing washer can prevent static misalignment
• Interference fit- Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
• Initial misalignment- Bearings with sphered housing washer(s) can accommodate initial misalignment.
• Separable and interchangeable- The separable components Thrust ball bearings are interchangeable This facilitates mounting and dismounting, and maintenance inspections.

• The double Direction Thrust ball bearings can support bi-directional loads.
• The bearings with spherical housing washer can prevent static misalignment
• Interference fit- Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
• Initial misalignment- Bearings with sphered housing washer(s) can accommodate initial misalignment.
• Separable and interchangeable- The separable components Thrust ball bearings are interchangeable This facilitates mounting and dismounting, and maintenance inspections.

• The double Direction Thrust ball bearings can support bi-directional loads.
• The bearings with spherical housing washer can prevent static misalignment
• Interference fit- Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
• Initial misalignment- Bearings with sphered housing washer(s) can accommodate initial misalignment.
• Separable and interchangeable- The separable components Thrust ball bearings are interchangeable This facilitates mounting and dismounting, and maintenance inspections.

• The double Direction Thrust ball bearings can support bi-directional loads.
• The bearings with spherical housing washer can prevent static misalignment
• Interference fit- Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
• Initial misalignment- Bearings with sphered housing washer(s) can accommodate initial misalignment.
• Separable and interchangeable- The separable components Thrust ball bearings are interchangeable This facilitates mounting and dismounting, and maintenance inspections.