Industrial & Scientific Store - Power Transmission Products

• The standard cylindrical rubber shock absorber is composed of a metal disc at one end and a screw rod, and the other end is a metal disc inner wire.
• The products are mainly used in industrial machinery equipment, compressors, fans, air conditioners, water pumps, motors, road rollers, vibration plate equipment, etc
• Special Note: The rubber hardness of the shock absorber can be customized from 30 degrees to 90 degrees, and the length of the screw can also be customized
• Thread Diameter: 0.24\", 8mm (M8) / 0.31\" (Optional); Package Included: 4 x Rubber Mounts. Please Check Your Vehicle Model Before Purchase. If You Are Not Sure, Just Connect Us By QA & E-Mail
• Performance: Super shockproof structure design, adhesion 40GK/CM2, tensile force 300% -400%, rubber hardness tolerance ?3

• Sturdy Material: made of quality chrome steel, thrust needle roller bearings are designed for heat resistance and durability under heavy loads; Steel cage guides and evenly distributed rollers reduce friction, vibration and noise
• Robust Capability: with a static load capacity of 45.6KN and dynamic load capacity of 12.9kN, these bearings can withstand heavy axial loads and provide reliable support to your machines
• Optimal Speed: with a maximum speed of 8500RPM, these thrust bearings can deliver smooth and efficient operation
• Complete Package: you will get 20 thrust needle roller bearings and 40 bearing washers for your convenience, so you can easily install and replace the bearings as needed
• Versatile Use: small roller bearings are suitable for a wide range of applications, including automotive, marine, aviation, and manufacturing industries, offering a versatile solution to your bearing needs

• The needle roller thrust bearing can only bear axial load in one direction
• High carbon chromium bearing steel, with heat resistance and heavy-duty durability
• Used in combination with two thrust washers, for applications where adjacent machine components cannot be used as raceways
• Steel cage guide rails and evenly distributed rollers can reduce friction, vibration, and noise
• From agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts, and aggregate crushers, repairing or rebuilding milling machines, lathes, or other equipment.

• 532196104 Idler Pulley Replaces Husqvarna 532196104, 5321961-04, 5321973-80, 532197380, Craftsman 196104, 197380;
• Specification of Hardware kit for 532196104 Idler Pulley: Hex Bolt : 3/8-16 x 2-1/4, Flat Washer: 0.407x0.812x0.13, Flanged Nylon Lock Nut: 3/8-16;
• 539132728 Idler Pulley Replaces Husqvarna 589766102, 5391121-96, 539131148, 5391327-28, 539132728, 589766101; Specification of Hardware kit: Carriage Bolt : 3/8-16 x 2-1/2, Flat Washer: 3/8, Flanged Nylon Lock Nut : 3/8-16;
• Specification of Hardware kit for 539132728 Idler Pulley: Carriage Bolt : 3/8-16 x 2-1/2, Flat Washer: 3/8, Flanged Nylon Lock Nut : 3/8-16;
• Fits for Husqvarna RZ5424, RZ4623, YTH24V48LS, GT52XLS, Craftsman 917204130, Poulan 460ZX Lawn Tractors;

• High quality material: One way bearing made of steel, reliable and good heat resistance, feel smooth, with good bearing capacity and stiffness.
• Exquisite Technology: Needle roller bearing uniform hardness, low friction, low noise, can speed up the work speed and production efficiency.
• The needle roller bearings are compact bearings that can be reduced in size and are suitable for use in limited mounting space.
• Note: Use a press or special tool for installation, do not use a hammer, because knocking will cause local deformation of the octagonal bearing.
• Widely Used: One way bearings are suitable for limited installation space, widely used in machinery, machine tools, pumps and compressors, transmission devices, rotary mop bucket, etc.

• Compression spring dimensions: 9/32 inch x 1/2 inch, 1/4 inch x 13/32 inch, 7/32 inch x 11/16 inch, 3/8 inch x 5/8 inch, 3/8 inch x 3/4 inch, 9/32 inch x 3/4 inch, 23/64 inch x 1-3/8 inch, 7/32 inch x 1-1/2 inch.
• Tension spring dimensions: 13/64 inch x 13/16 inch, 7/32 inch x 1 inch, 1/4 inch x 7/8 inch, 5/16 inch x 1-1/8 inch, 5/16 inch x 1-1/4 inch, 5/16 inch x 1-3/4 inch.
• Material: small coil made of #75 galvanized steel, very durable
• Application: can be used for various repairs and maintenance of automobiles, replacement parts, manual tools and equipment
• Packaging: each small spring is placed in a plastic box with a size table label, very convenient

• Material: The pen replacement spring is made of high quality stainless steel with smooth and burr-free surface and good mechanical properties.
• Good Elasticity: The strong compression springs is formed in one piece, with high ductility and durability.
• Application Range: Click spring are widely used in toys, ballpoint pens, electrical appliances, furniture, offices and other fields.
• What You Will Get: Package contains 10 pieces of coil extended compressed spring, wire diameter 1.2mm/0.04\", outside diameter 12mm/0.47\", length 50mm/1.97\".
• Quality Assurance:BokWin is committed to providing cheap and cheerful item for customers. We will continue to improve our products and services to bring you high-quality shopping experience.

• Made of high-quality aluminum alloy material, suitable for 10mm shaft guide
• Size: inner diameter 10mm, outer diameter 16mm, thickness 8mm
• Lightweight and durable construction.Selected material, accurate positioning, durable
• Easy installation, corrosion resistance, rust resistance,long lasting
• Packing list includes 10 shaft collars with ID/OD/THK dimensions of 10/16/8mm.

• Size - Outer Girth: 1100mm; Top Width: 10mm; Thickness: 9mm
• Rubber Belt - Tensile cords made of rigid polyurethane are embedded in the rubber for strength and reinforcement. Neoprene rubber has good resistance to oil, heat and wear, impact-resistance.
• Features - To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
• Applications - For all general drives for drive systems of lawn mower, tractor, snow blower, bandsaw, drill press, box fan, trimmer, etc.
• Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.

• [MODLE] - Bearing Model: AXK7095 (I.D.=70, O.D.=95, Bearing Thickness=4mm,); Washer Model: AS7095
• [MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.
• [CAPABILITY] - Dynamic Load Rating (Cr): 54kN; Static Load Rating (Cor): 255kN; Limiting Speed (Grease): 3450RPM, designed for accommodate axial loads in one direction only
• [APPLICATION] - Needle Roller Thrust Bearings, composed of bearing balls supported in a ring, can be used in thrust applications where there is axial load, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.

• [MODLE] - Bearing Model: AXK1024 (I.D.=10, O.D.=24, Bearing Thickness=2mm,); Washer Model: AS1024
• [MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.
• [CAPABILITY] - Dynamic Load Rating (Cr): 9.15kN; Static Load Rating (Cor): 24.5kN; Limiting Speed (Grease): 14000RPM, designed for accommodate axial loads in one direction only
• [APPLICATION] - Needle Roller Thrust Bearings, composed of bearing balls supported in a ring, can be used in thrust applications where there is axial load, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.

• Applicable Scenario 10MM gas strut mounting bracket work for any gas spring with a connector bore diameter of 10mm. Euplokeer bracket compatible with most gas springs on the market.
• Special structural design 10mm ball head perfectly matches 10mm gas prop. 2pcs L-Type and 2pcs Flat-Type structure design makes the process of installing gas springs less troublesome in terms of mismatching angles. Bonus 16 screws for installation.
• Product Basic Information Made of heavy-duty steel, maximum load 250LB. Black galvanized coating for corrosion resistance.
• Purchase the right shock The ball mount is usually used in conjunction with a set of gas shock for some DIY projects, such as cabinets, boxes lid, hatches, cellar doors, bar window, etc.
• Care from the Euplokeer brand To the world you may be a person, but to us, you may be the world. 24 hour email response and 15 month product exchange service. Euploker is much more than that. Please feel free to contact us at any time with any questions.

• Material Web sheave is made of cast iron, this is sturdy, stable, corrosion resistant
• Advantage Single groove web sheave features smooth operation, low noise, low vibration, easy adjustment
• Widely Used Used for agricultural machines, tractors, mining machines, machining equipment, lathes
• Size The outer diameter is 2 inch,the bore is 5/8 inch
• Package Include 1pcs single groove web sheave,2pcs screws,1pcs Allen Key

• Single Groove Web Sheaves Material: made of high quality cast iron material, sturdy, stable, corrosive resistant, fine workmanship, excellent performance
• Pulley outside diameter is 2.0 inch, the bore is 5/8 inch, 1 Groove
• This Single Sheave is designed for use with V-belts, smooth operation, low noise, low vibration, easy adjustment, One groove only used for the Single belt
• Widely Used for V-belts in many existing drives, for agricultural machines, tractors, mining machines, machining equipment, lathes etc.
• Package Included: 1pcs AK20-5/8 Bored Single groove web sheave, 2pcs Screws, 1pcs Allen Key