Industrial & Scientific Store - Power Transmission Products

• Prevent Vibration These vibration isolators are designed with simple geometrical design supports dynamic performance and stability under lateral (sideways) forces. In the radio equipment, instruments, protect machine vibration interference, having a good buffer
• Reduce Noise These heavy duty rubber isolator m8 provide excellent noise and vibration reduction due to the softness of the rubber. As a damping element for welding machine and other equipment for vibration, shock and noise control. Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious
• Soft & Durable Our vibration isolation mounts are made of softer rubber, which is perfect for applications that call for lighter loads where vibration reduction is key. The long-lasting high elasticity rubber material made it has better performance in vibration reduction, isolation and sound insulation
• Wide Application Rubber isolator mounts are suitable for air compressors, diesel engines, gasoline engines, water pumps, electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications
• Specification Material: Rubber + steel zinc coating ; Color: Black + Silver; Thread Diameter: 6mm (M6) / 0.24\", 8mm (M8) / 0.31\" (Optional); Package Included: 4 x Rubber Mounts

• This 624ZZ 4x13x5-millimeter shielded miniature ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. Its chrome steel construction makes it durable and resistant to deformity under heavy loads.

• Model HK0608 Material Steel Inner diameter 6mm Outer diameter 10mm Thickness 8mm Quantity 10pcs Features: Suitable for 6mm shaft. Widely used in textile machinery, printing machinery, engineering machinery, packaging machinery, electric tool, office equipment,etc. Package Included: 10 x HK0608 6x10x8mm Needle Bearings

• Universal Design - rubber mount with Studs and Nuts M8, set of 4 pieces
• Heavy Duty - durable, high durometer, resilient, anti-vibration, the metal stud is two pieces terminated and bonded within the rubber that perform better isolation than go all the way through the rubber
• Damping Capacity - rubber vibration isolation cushion for shock absorption and reduce noise
• Applications are endless - air compressors, water pumps, etc.
• Breezy Installation & Versatility - assemble easy enough

• TOTAL DIAMETER - 450mm/18\", THICKNESS - 10mm/0.4\"
• LOAD CAPACITY - 120kg / 265 lbs ?No top included??
• BEARING BALLS DIAMETER - 5mm,WEIGHT - 1.2kg
• ANTI-DAMAGE PACKAGE - We use thickened paper carton and foam packaging to ensure that the product can be delivered in good condition
• **If you have any difficulty in using the lazy susan, please ask us for help

• Item: RCB101416 Roller Bearing
• Type: Needle Roller Bearing
• ID (inner diameter)/Bore: 5/8\" Inch
• OD (outer diameter): 7/8\" Inch
• Width/Height/thickness: 1\" Inch

• Anti-Rust Material: stainless steel 304 wire, will not rust in humid environment, has strong anti-oxidation, anti-acid, anti-corrosion ability.
• Easy To Storage and Use: All compression springs are neatly packaged in plastic storage boxes, and size labels can be used to identify spring size.
• Versatile: 24 sizes of springs to choose from for home repairs. We hope this spring combination kit is suitable for most repair items such as doors, curtains, cars, bicycles, pianos, scissors, electrical equipment, repair tools, umbrellas, antique tape recorders, repair toys, pliers, etc.
• Reliable Quality: professional design, rigorous calculation, precision manufacturing, and effective testing.
• Size: [A - B - C] A is the wire diameter, B is the outer diameter, C is the free length, the first category is 0.018*0.0197*0.394/0.590/0.787/0.984IN, the second category is 0.0197*0.0236*0.394/0.590/0.787/0.984IN, the third type is 0.0217*0.256*0.394/0.590/0.787/0.984IN, the fourth type is 0.0236*0.276*0.394/0.590/0.787/0.984IN, the fifth type is 0.0236*0.276*0.394/0.590/0.787/0.984IN 0.276*0.394/0.590/0.787/0.984IN, six types are 0.0276*0.276*0.394/0.590/0.787/0.984IN

• Please NOTE before purchase : 1. Because the main body of the product is made of plastic, it is normal for the product to have scratches. 2. The motor is a stock part, and the product will be shipped after power-on test, not a second-hand product. 3. In order to prevent the motor screw from rusting, the exterior of the product is coated with a little lubricating oil. So perfectionists please buy carefully.
• This 35-type two-phase four-wire stepper motor, linear Stage Actuator with lead screw slide table, add a travel limit switch. Large torque, no reduction box, fast speed, slider accuracy of 0.1-0.2mm. (Please NOTE: The bottom of the slide table is raised due to the large size of the motor, which has nothing to do with quality issues.)
• Motor Type: 2-phase 4-wire stepper motor (no gearbox); Motor Diameter: 1.37\"; Drive Voltage: 5-12V / 500mA-2A; Motor Step Angle: 7.5 degree(that is, 48 pulses for one revolution); Wire Length: 3.93\"; Wiring Method: Black A+, Brown A-, Yellow B+, Orange B-. Tips: The stepper motor direct power is not rotating, requires a dedicated stepper motor driver board. please search B09BTWQPTB.
• Stage Total Size: 6.1\" x1.96\" x1.37\" (including motor); Slide Table Size: 5.51\"x1.96\"x0.98\"; Sliding Block Size: 1.96\"x1.18\"x0.78\"; Lead Screw Length: 5.11\"; Effective Slide Stroke: 3.93\"; Lead Screw Diameter: 0.13\"; Lead Screw Pitch: 0.09\";
• Product Usage: Mainly used forlaser engraving machine, DIY small slide, instrumentation, security, teaching experiment development, range finder, laser positioner, automation, toys, and other products.

• 100% brand new and high quality.
• This joint or coupling connects rigid rods whose axes are inclined to each other.
• Made of premium metal material, it is durable and has long service life.
• It is commonly used for shafts that transmit motion.
• Widely used for connecting model cars, model ships, robots, etc.

• Specifications: Hardness: 58-60HRC; Number of Teeth: 12; Outside Diameter: 53mm / 2.09-inch; Total Width: 7mm / 0.28-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7mm / 0.28-inch; 1 x Chain Sprocket
• Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.
• The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
• The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
• There is no anti-rust coating on the surface of the product, and there may be rust on the surface, which does not affect the use. You can use sandpaper to remove the rust before use.

• PACKAGE INCLUDED: 1pcs BK12 bearing block,1pcs BF12 bearing block
• WIDELY USED: Used for CNC machine parts SFU1605 ball screw,Support unit such as BK type bearing into the proper amount of lithium soap grease, with special sealing gasket for seal, can direct installation, use for a long time.
• HIGH QUALITY: Non slip effect, heats up less, less driving force required, high static and dynamic rigidity.
• ADVANTAGES:There is a long service life due to low friction, low operating noise, but no stick-slip effect, heats up less, reduces the drive power. Low friction loss, high transmission efficiency.
• BEST SERVICE: If you receive the package and are not satisfied with the goods or there is other problem such as defective, please tell us the reason for detail and provide the photos. We will provide perfect after-sales service to every customer.

• QUALITY - 100% dimensional tolerance inspection to achieve the best fit for installation.
• MATERIAL - Bearings are made of chrome steel with wear resistance and high strength.
• FEATURES - Double seals on both sides effectively prevent impurities from entering.
• BENEFIT - High speed and durable are your simple and efficient choices.
• EXPERT - Professional made of bearings started in 1945 and is worthy of your find.