Power Transmission Products By FUSHIBEARING

• Deep-groove geometry for high speeds and supporting both radial and axial loads
• Work in hardi agricultural sprayer pump model 363 3D Ciclop Scanner Printer
• Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
• Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise
• CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision

• MR148ZZ (ID=8mm, OD=14mm, Thickness=4mm)
• Bearing made from Chrome Steel for durability and resistance.This type bearing is Miniature Single Row Deep Groove Ball Bearing,mainly take the radial load as well as moderate axial load.
• Bearing are fitted with two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance.
• Bearing Features: simple configuration,high speed,hight precision,less coefficient of friction,less vibration and noise,most widely used.
• Miniature Deep Groove Ball Bearing suitable for all kinds of industrial equipment, micro motor,small rotary motor,office equipment,RC Cars and so on.

• Fit Perfectly - ISO 492:2005 Standard, The aperture tolerance range is controlled between 7um, make sure fit great.
• Roll Smoothly - Internal G5 steel ball and synthetic grease, minimize friction, improve rotation efficiency.
• Without Backlash - Under the condition of non-laod, the radial swing play is within the 9um range.
• Dimensions Correspond - Inner ID 16mm, Outer OD 31mm, With B 10mm, match the rear hubs of the bike.
• Specialized recommends you replace these about once every 6 months with agressive riding and once a year for passive riding.

• F695ZZ Bearing Size?I.D.=5mm, O.D.=13mm, Thickness=4mm, Flange Dia: 15mm.
• A flange is an extension, or a lip, on the outer ring of the bearing, designed to aid the mounting and positioning of a bearing in a delicate or problematic application.
• This Bearing can be fitted to For 3D Printer.
• Chromium Steel long-life bearings, smooth and low noise.
• The bearings operate smoothly in all directions?Deep groove geometry for high speeds and supporting both radial and axial loads.

• Improper bearings will cause severe fever.FUSHI has made 5000+ of attempts.the bearings of these special structure are developed.These bearings are not grease, and with improved cage.
• This is dedicated to the nail machine and grinding machine in the bearings,These devices have to be at a speed of tens of thousands of RPM,So ordinary bearings are not applicable,Special structure is required.
• Grease can play a role of lubrication and protection at slow speed.But in a moment of high speed, it will hinder,Including high temperature grease, also has no effect.
• We already have customers using UP200 and Strong102,Speed in 20000-35000rpm, no problem.
• Size:3x10x4mm With no grease. Also fits the UP200 UG12, UG14, SUG12 handpieces.

• Improper bearings will cause severe fever.FUSHI has made 5000+ of attempts.the bearings of these special structure are developed.These bearings are not grease, and with improved cage.
• This is dedicated to the nail machine and grinding machine in the bearings,These devices have to be at a speed of tens of thousands of RPM,So ordinary bearings are not applicable,Special structure is required.
• Grease can play a role of lubrication and protection at slow speed.But in a moment of high speed, it will hinder,Including high temperature grease, also has no effect.
• We already have customers using UP200 and Strong102,Speed in 20000-35000rpm, no problem.
• Size:4x9x4mm With no grease. Also fits the UP200 UG12, UG14, SUG12 handpieces.

• Model: 24378 RS; Structure: Deep Groove Ball; Material: 52100 Chrome Steel
• Bore Dia (d): 24 mm; Outer Dia (D): 37 mm; Width (B): 8 mm
• Closures: Rubber Sealed (2RS); Lubrication: Grease
• Grease does not need to be added extra.
• With low be sanded LBLU seals/equivalent to 2RS LLU/LLB

• Includes 4 replacement 17x30x7 6903 blue Ball Bearings
• Lubricated with Grease, Chrome Steel 52100 (GCr15) ABEC 3 Precision Races, Hard Chrome Steel 52100 (GCr15) Balls
• Used in RC Models, BIke Hub
• Rubber Sealed Ball Bearings have maximum protection, and are ideal for off-road racing. They protect well against exposure to dust, dirt, and moisture, which can destroy bearings

• Special flange bearing F695RS , used in VORON Mobius 2 / 3 3D Printer
• The double-sided lid is sealed to ensure that dust is prevented when printing at high speed.
• Pre-filled with grease, low noise, to ensure the long-lived bearing surface operation.
• G10 steel balls, steel cage, special trench rate, to ensure the stability of rotation.
• Dimensional tolerance inspection for optimum assembly.

• Structure of bearing model 684zz :Inner & outer ring, cage, steel balls, grease, shield
• Our bearing is pre-lubricated with grease,The main purpose of lubrication is to reduce friction that may cause premature failure.
• Nylon plastic retainers,Use for high speed rotation and low noise levels?The ZZ shield cannot be removed
• Bearing is made of chrome steel material,The typical surface hardness for bearing components made from this material ranges from 60-64 on the Rockwell hardness C scale (Rc).
• Bore Dia (d): 4.000 mm Outer Dia (D): 9.000 mm Width (B): 4.000 mm