Industrial & Scientific Store - Robotics

• Continuous Collector current: 3A
• Collector-Emitter voltage (VCE): 100 V
• Collector-Base voltage (VCB): 100V
• Emitter Base Voltage (VBE): 5V
• Package: To-220

• Best Industry Grade PCB Suitable for Production Level Tasks as well as any DIY Projects
• Long Life, Higher Strength and Endurance then XPC Grade PCBs

• The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold.
• The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.
• Uses: For a variety of shocks triggering, theft alarm, smart car, an earthquake alarm, motorcycle alarm. This module when compared with normally open penumatic shock sensor module, shock triggered much longer can drive relay module Module features: the use of the company's production of SW-420 normally closed type vibration sensors.

• 1. Wide Uses: AC contactors are used for connecting and disconnecting circuits, or frequently control the operation of electric motors and other equipment
• 2. Basic Specifications: Consists of moving and static main contacts, arc extinguishing cover, moving and static iron cores, auxiliary contacts and bracket shell, etc.
• 3. Main Application: Mainly used for long distance connecting and breaking circuits and frequent start, stop and thermal relay to form a magneto starter
• 4. Turning on or off Power Supply: Turning on or off the power supply can replace the automatic switch function that the manual switch cannot do, and widely used for automatic control
• 5. Pa66 and Thermosetting Plastic: AC contactor made of Pa66 and thermosetting plastic, with frequency of 50Hz, easy to use

• MQ135 sensor with simple circuit for threshold detection
• Good sensitivity and selectivity to CO2, Benzene, Nox, NH3 and other pollutant gases
• Low humidity and temperature dependency
• Long stability and reproducibility

• Led chaser circuit with 10 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

• Long Lasting Multipurpose Quality Aluminum Wire
• 50 Meters Aluminium Wire - 10 Meters each 1mm, 1.5mm 2mm, 2.5mm & 3mm Diameter with Anodized Coating
• Easy Bending Cutting for Use: Strong yet easier to bend, Reusable and environment-friendly
• comes with the trust of green paradise.

• Colors: Black, Red, Yellow, Green, Blue,
• Used for Bread board, Electronic Lab Purpose, Electronic Project and Craft Purpose
• 25 Meter 5 Color wire In A Pack

• Outside Diameter: 10mm
• Length: 600 mm (0.6 meter)
• Material: EN-31 (Hard Chromed)
• Qty: 2pcs
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• This motors are used in diverse applications including robots, electric scooters, and electric bicycles.
• 24V Permanent Magnet Motor Generator for Wind Turbine PMA.
• Installment pitch of holes:42-95(4 holes).
• 24V Permanent Magnet Motor Generator for Wind Turbine PMA. This is achieved by the use of four brushes and advanced electromagnetic computer modeling and design.
• The shaft rides in two high-quality ball bearings.

• Quad Store - Project Basic Starter Kit with compatible uno r3 for beginners
• Check out for brand name quad store, qr scan code and hologram in the retail package to verify authenticity of the product
• Note: Includes quaduino uno r3 board - high quality compatible Uno R3 board. Kindly refer listing picture for details.
• Skill level: Beginners/starters
• Package includes: Individual components in retail box, starter guide and source code to be downloaded using the link provided in the kit, parts reference chart and list for easy identification

• This is D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP-8266EX.
• 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection.
• The development board features WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping.

• Contact Material: Tin Plated Phosphor Bronze; Connector: Male
• Current rating: 3A; Voltage rating: 150V
• Contact Resistance: <30 M; Wire Gauge Accepts: 22 ~ 28 AWG
• Pitch: 2.54mm
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Endurance: =500,000 times of wire and Plastic Body Electrical
• Rated voltage: 250 Volts and Rated current: 16A/Contacts: NO+NC. Also works on 24 Volts DC.
• Cable: 3 Meter / A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• 6 months warranty for manufacturing Defect (Repair or Replacement)

• Model: AM2302
• Operating Voltage: 3 - 5.5V, Humidity measurement precision: ?2%RH
• Accuracy resolution: 0.1%, High precision, Capacitive type
• Humidity range: 0-100%RH
• Temperature range: -40-80 degreeC, Temperature measurement precision: ?0.5 degreeC

• PCB, clad, copper, copper cladd, printed circuit board, electronic ckt
• Copper clad fr4 glass
• It is Single Sided