Industrial & Scientific Store - Robotics

• Easy ?Plug & Play setup for immediate use with Room Alert environment monitors.
• Digital temperature sensor range: -67 to 257 F (-55 to 125 C).
• Digital temperature sensor accuracy: + / - 2 C degrees.
• Digital sensor cable length & type: 25' RJ-11 attached (extend to maximum of 100').
• Compatible w/ Room Alert 32S, 32E, 32W, 26W, 26WO, 24E, 12S, 12E, 11E, 7E, 4E, 3E & 3W; WiSH & WiSPR hubs. 7E, 4E, 3S, 3E & 3W; TemPageR 4E & 3E; WiSH & WiSPR hubs.

• This is a brand new OEM upgraded Fan Motor
• This OEM Part Directly Replaces Part # 0131P00054SP
• Top Quality OEM Replacement Part, Built to Last!
• Works with Goodman and more!

• This is a brand new OEM upgraded Fan Motor
• This OEM Part Directly Replaces Part # Y4S476B015
• Top Quality OEM Replacement Part, Built to Last!
• Works with Zhongshan Broad-Ocean and more!

• Heating voltage: 5 +0.2V (AC?DC);Working current: 180mA;Circuit voltage: DC5V (Max DC24V);Clean air voltage: < 1.5V
• Test concentration range :10-1000ppm ; Sensitivity: >3% ; Response time: < 1S (3-5 minute warm-up, theory preheating time 48 hours)
• Working temperature: -10 ~ 50 oC (nominal temperature 20 oC) ; Humidity: 95% RH (nominal humidity 65% RH)
• Size: 35mm?40mm?28mm

• High Performance Power: 0.75kw; Input voltage: AC 220V(?15%); Output voltage: AC 220V; Input frequency: 50/60 Hz; Output frequency: 0-3000 Hz; Input phase: Both Support Single or Three phase; Output phase: three-phase.VFD Dimension: 3.5 x 4.5 x 6.5 Inch (L x W x H).Weight?2.2 LB
• Feature Rich of digital and analogy control terminals for versitile control ?RS485 communication port, adopting standard international MODBUS main circuit control.With extremely strong anti-jamming capability, safe for you to use.
• Smart Digital Display Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control.
• Application Motor CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
• Importent Note This VFD does not surpport external resistor. If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion. The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit.

• Measures 3.1 inches diameter (78 mm) by 4.0 inches long (102 mm)
• No-load rpm: 5900 at 12 volts; Can be used with voltages ranging from 6V to 18VDC
• Maximum power: 500 watts (0.66 horsepower); Maximum stall torque: 3.2 Nm (450 oz-in)
• Peak efficiency at 12V: 71% at 28 amps and 5100 RPM
• Power and torque at peak efficiency: 238 watts, (0.32 horsepower), and 447 mNm (63 oz-in)

• Be alerted when power goes out: MySpool P3 Multi-sensor uses Wi-Fi to send text messages, email or push alerts when power goes off and comes back on. Alerts are also sent when temperature values exceed given thresholds, or water or a short is detected.
• Monitor outlets for outages and GFCI shut off. View temperature chart when required. All sensors can be used or disabled as needed. Customizable device description included in alert message can help to identify its location and function.
• Comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft cable and a waterproof temperature sensor with a 3 ft cable. High quality moisture sensor with nickel plated surface for corrosion resistance is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55 degree C to +125 degree C (-67?F to +257?F), with accuracy of 0.5 degree C over recommended range of -10 degree C to +85 degree C (14?F to +185?F),
• WiFi access during power outage is required, please check before ordering. Each MySpool P3 Multi-sensor is independent; no hub is required. Manage all from one account or create one account for each.
• No fees or subscription costs. Multiple phone numbers and email addresses supported.

• Measures 4.3 inches diameter (109 mm) by 5.3 inches long (209 mm)
• No-load rpm: 3300 at 24 volts; Can be used with voltages ranging from 12V to 36VDC
• Continuous power: 500 watts (2/3 horsepower)
• Peak efficiency at 24V: 80%
• Supplied with 11-tooth sprocket for #25 chain

• Rated Voltage: 13.5 VDC
• Rated Speed: 100 RPM
• Rated Load: 60 Watts
• Rated Torque: 3 N-m (2.2 ft-lb)
• Shaft: 3/8\" shaft with 1 flat (\"D\" shaft) where flat to OD is 0.322\" and the length of the shaft is 0.886\" long

• Rated Voltage: 13.5 VDC
• 3/8\" shaft with 1 flat (\"D\" shaft) where flat to OD is 0.322\" and the length of the shaft is 0.886\" long
• Speed: 50 RPM
• Mounting: M6 screw holes
• Rated Torque: 6 N-m (4.4 ft-lb)

• 12V PMDC
• Right Angle Worm Gear
• 50 RPM Low Speed
• Simple 2 Wire Leads
• Reversible

• Type of product: Direct drive stirrer; Stirling shaft dia* Length (mm): 8x350
• Type of fluid: Water; Stirring capacity (Litres.): 20 Litres
• Motor: AC/DC 1/8 HP; Min. speed (RPM): 300
• Max. speed (RPM): 4000; Digital speed indicator: No

• Model: DMA860H Driver; Voltage input: 18-80VAC; Current: 2.0A-7.2A,resolution: 0.1A; Microstep: 400-51200 ppr; Signal input: differential/single end,pulse/direction or double pulse; Pulse response frequency: 200KHz
• Product Features: DMA860H The driver adopts differential interface circuit applicable to differential signal, single-terminal common negative and common positive interfaces, built-in high-speed optocoupler, allowing the reception of long line driver, collector open circuit and PNP output circuit signals
• Direction signal: High/low level signal. To ensure reliable commutation, the direction signal should be established at least five microns before the pulse signal. The initial running direction of the motor is related to the wiring of the motor. Interchanging any phase windings such as A+, A- switching can change the initial running direction of the motor, DIR- 4-5V at high voltage and 0-0.5V at low voltage
• Pulse control signal: The pulse rising edge is effective; PUL- 4-5V at high voltage and 0-0.5V at low voltage. To reliably respond to pulse signals, the pulse width should be greater than 1.2 microns. Series resistance is required if +12V or +24V is used
• Suitable motor: Can drive 4, 6 and 8-wire two-phase stepping motor,fit for Nema23 Nema34 Nema42 Stepper Motor;Also suitable for various small and medium-sized automation equipment and instruments, such as engraving machines, cutting machines, marking machines, engraving machines, plotters, CNC machine tools, automatic assembly equipment etc

• User-Friendly Four-Way PCB Support : you can get 4 PCB holder way : 4 pillars can brace or clamp PCB boards; Mini Clamp Holder ideal for small PCBs. The universal magic arm is suited for handling larger PCBs ; 4 soldering Arms for holding small item or wire
• [More Stable Hot Air Gun Magic Clamp : ours strong magnetic clamp offers a reliable and strong hold. Designed to hold hot air guns and rework stations guns, it includes a 360-degree rotating bracket and an adjustable clamp width for versatile positioning and secure operation
• Upgrade 4 PCB Holder Pillars : Efficient PCB Support - New pillar design, higher than others, increases the clamping function for PCB boards. These pillars provide more convenient support for different PCB boards, making your work more efficient and organized
• Mini Clamp Holder for Precise Work : Enhance your accuracy with precision clamping - This mini PCB clamp holder is perfect for securely holding small parts. It's ideal for detailed tasks in jewelry making, hobbies, model building, electronics, and other precision work at home or on the workbench
• Flexible Help Clamping Arms : Ultimate Flexibility - Includes two 13\" and two 6\" helping arms that can be placed anywhere on the base and angled to almost any position. Provides flexibility and helps to clamp tin wire or jewelry chain, completely freeing your hands
• Larger Heavy-Duty Steel Base : Designed for Stability and Durability - This heavy-duty base provides even weight distribution to prevent movement and tipping. Its smooth, rust-resistant surface with waterproof coating enhances durability. The base features a larger working area with four non-slip rubber pads for you to repair larger items
• Very Simple to Install : even beginners can start effortlessly - The components are fully adjustable and can be placed anywhere on the base, set to any angle required. Perfect for you to do electronics repair, jewelry making, and detailed craft projects