Industrial & Scientific Store - Robotics

• This unit is 40% more powerful than the two models it is replacing to help get your soldering job done faster
• Easy to handle high performance 70W soldering iron with a heat-resistant silicon Cable for safe handling
• Temperature stability (+/- 4?f, 2?c) and temperature lock protects tips and components, affording a consistently high quality process with repeatable soldering results
• This unit is loaded with cutting edge features sun as intuitive navigation, a Standby mode and auto setback conserves energy and password-protection to Preserve settings
• Includes: one (1) We1 station 120V, one (1) Wep70 tip retainer, one (1) Wep70 iron, PH70 safety rest with sponge, and Eta tip 0.062?/1.6 mm screwdriver

• OPEQUE Skin Colour Body
• Main Cord 110 - 220 AC
• SMPS 5AMP 220 AC
• Output 12 V
• Zooming Knob Function

• Aplications/Features, Packard Shaded Pole Motor
• Automatic Overload, Open Enclosure, 60 Hertz, Single Phase
• Rotation is Determined by Viewing the Shaft End
• Motor has 4 studs on both ends
• Motor Voltage: 115, Amps: 1.80, Brand: Packard, Bearings: Sleeve, Country of Origin: CHINA, Diameter (In.): 3.3, Enclosure: Open, H.P.: 1/20, Hertz: 60, Length Less Shaft (In.): 2-3/4, Motor Rotation: CWSE, Motor Type: Shaded Pole, Mounting Option: Stud, NEMA Frame: 3.3, Overload Protection: Automatic, Phase: Single, RPM: 1550, Shaft Dimensions (In.) Dia x Lgth: 5/16 x 2-1/4, Speeds: 1, UPC: 840899101194, Voltage: 115

• Replacement furnace motor
• Fits Dometic furnaces
• Use as an exact replacement for the original motor
• Includes motor only
• Fit specific, always verify part numbers to ensure the proper replacement

• Knife Cartridge Blade - 2.5mm X 0.3mm
• Compatible with JBC NT115-A, NP115-A and AN115-A Nano Soldering Tools
• C115 cartridges are appropriate for soldering and repairing very small-sized components at high precision, even under a microscope.
• JBC Long Life Tips offer instant heat up, excellent heat transfer and great durability.
• Authentic JBC Tools Product

• REPLACEMENT OE: 741-003,61188SA011, 61222SA011. The window regulators are manufactured according to OEM standards and fit the original car.
• APPLICABLE MODELS: Replace for 2003-2008 For Subaru Forester.(Please confirm if the item fit your vehicle model at the upper left before purchasing)
• REINFORCED COMPONENTS: The window motor Front Left is made of thickened steel wire and steel plate, which has a stronger load-bearing capacity, is tough and firm and runs smoothly.
• HIGH QUALITY MOTOR: The power window motor is surrounded by high-quality copper wire, which has good performance, which can lift and lower the window powerfully and run smoothly.
• EASY INSTALLATION: Simple plug-and-play design for quick installation and immediate operation

• 3220 Solderless Breadboard plus Electronics fun kit,Compatible with Arduino and Raspberry Pi
• Power Supply Module,Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• 140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation
• Better improvement on product quality and durablity
• Perfect for Arduino/Raspberry Shield Prototyping and Testing. Powered by Makeronics Technology

• Traditional Mullen style curb bit with straight bar
• Stainless Steel
• Includes curb chain
• Weymouth curb cheekpieces
• Pair with Bradoon bit for complete dressage double bridle

• The tekmar Outdoor Sensor 070 includes a 10 k thermistor which provides an accurate measurement of the outdoor temperature
• The 070 sensor is protected by a white U.V. resistant PVC plastic enclosure.
• Outdoor Surface Sensor

• LD06 is mainly composed of laser ranging core, wireless transmission unit, wireless communication unit, angle measuring unit, motor driving unit and mechanical housing. The LD06 ranging core adopts DTOF technology to measure 4500 times each second.
• LD06 emits the infrared laser forward, the laser is reflected to the single photon receiving unit after encountering the target object. Thus, we get both time of laser emitting and receiving, the gap between them is time of flight.
• After receiving distance data, LD06 will combine them with angel value getting from angle measurement unit to comprise the points cloud data, then transmitting the points cloud data to external interface via wireless communication.
• Meanwhile the external interface provides PWM to allow motor driving unit to drive the motor. After the external control unit gets the rotational speed , it will reach to specified speed through PID algorithm closed-loop control to ensure LD06 work stably.
• We provide a variety of development boards, microcontrollers, electronic chips, electronic components, integrated circuits, and support business trade.

• [High-precision Fused 2D LiDAR] RPLIDAR C1 2D lidar sensor support ranging radius up to 12m, Ranging blind spot as low as 0.05m, Scanning frequency 8~12Hz, Typical: 10Hz (600rpm), 5K sampling frequency, 0.72 angular resolution, IP54 Proof Level, Light intensity resistance: 40,000lux, Ranging Resolution: ?30mm, Pitch Angle: 0?-1.5?, Range Accuracy: 15mm.
• [HD High Definition and Cost-Effective] RPLIDAR C1 lidar scanner integrates the technical advantages accumulated in triangulation and TOF ranging for many years, enabling C1 rangefinder to meet the requirements of robot positioning, mapping, and navigation in terms of ranging accuracy, distance measurement, anti-interference, and anti-adhesion performance.
• [Compact in Size and Easy to Integrate] RPLIDAR C1 lidar sensor not only delivers powerful performance but also features a compact and agile design. It is small and has low levels of noise and vibration, making it easy to integrate into various applications. Its compact size and versatility open up a wide range of possibilities and uses.
• [Comprehensive SDK tutorial and Support ROS] WayPonDEV can provides SDK development packages that can run on different platforms such as x86 Windows, x86 Linux, and arm Linux. RPLIDAR C1 2D LiDAR supports ROS and ROS2 operating systems, assisting customers in development and integration across various operating systems and architectures.
• [Widely Application Scenarios] RPLIDAR C1 Lidar Sensor rangefinder can be applied to Home Robots, Environmental scanning and 3D reconstruction, Commercial Robot, Obstacle detection and avoidance, Autonomous Vehicles in Low-Speed Parks, Parking Lot Space Monitoring and so on.
• [Wiki] SDK Document: \"https://www.slamtec.com/cn/Support#rplidar-c1\". Please click \"WayPonDEV\" store and ask the question. All technical and after-sales questions, please leave the message to \"wpd#youyeetoo&com (#--->@,&--->.)\" .

• Coding circuits was never easier. The BrainClip Kit with the BrainPad Pulse uses alligator clips to easily connect the clips to any BrainPad.
• Solderless connections using included alligator clips
• Several sensors for understanding inputs from physical world into the ?brain?.
• Several outputs for understanding how the ?brain controls the physical world.
• NOT compatible with micro:bit or micro:bit accessories!

• Dual heat gun 300 produced or 200 watt
• Nickel-plated copper secondary, heat resistant thermoplastic housing
• Heavy Duty Grounded Cord
• 2-wire cord
• UL and culling listed.