Industrial & Scientific Store - Robotics

• Specification 30ft 18 AWG Gauge 0.824mm 4 conductor wire(Red & Black & yellow and green & white). Rated voltage: 300V . Rated temperature : 80 degree C/176?. Cond.resistance: 13.7?/KM20 degree C, Insulation resistance: 10M?/KM20 degree C, Dielectric test: 2000AC V/min.Material:PVC+Tinned Copper.
• Extreme flexible 164pcs strands,0.08mm/strand tinner cooper in every conductor, more than 15 million cycles, suitable for chain system.
• Shield wire The shielding layer can shield this electromagnetic field inside the cable. Shielded cables also serve as grounding protection: if there is damage to the core wire of the cable, the leaked current can flow along the shielding layer, such as the grounding grid. At this point, shielded cables serve as safety protection.
• High Conductivity Tinned copper not only has good electrical conductivity, but the tin coating also has the characteristics of strong corrosion resistance and oxidation resistance.It can greatly extend the service life comparing with ordinary copper wire. It is also more suitable for soldering.
• Application It is widely used for chains in data and signal cables, sensor technology, control equipment and computer control engineering and machinery. It can be used for wet conditions but not for outdooor.

• Capable of handling high current (up to 200A), Anti-spark soft switching for inductive loads
• Input voltage up to 15-60V (12S), 4x XT90 connectors (50A each for ESC with motor)
• Analog battery voltage and current sensors output for flight controllers and robotic applications
• DC-DC converter from 15-60V input (up to 12S battery) to 5V 5A output, DC-DC converter from 15-48 V input (up to 12S battery) to 12V 5A output
• 5V and 12V power output terminals (standard 2.54mm/0.1\" connectors), Power output for flight controller (for eg., Pixhawk, Cube Orange)

• Input Power (VAC): AC 180-260V 50/60 Hz (wide voltage range)
• Output Electricular Voltage Range (VDC): 0-90V / 110V / 180V / 220V (Different versions can be customized)
• Output generator current range(A):8A (0.1A-10A is the assumed output excitation voltage range (VDC):100V / 200V (default full bridge rectifier) 0.9 times the input voltage)
• Operating frequency: 16 KHz

• 1 Pieces of K Thermocouple Probe Range from -200 degree C~260 degree C (-328?F~500?F) Compatible with HUATO S220-T8 & S1516 Data Logger
• Mini Connector with 1 Meter Long Sealed Cable
• Allows Forming and Bending of the Thermocouple Probe
• High Accuracy, Ease of Use and Plug in & Play

• (1)Dual axis Inclination Measuring: X-axis (-90 degree, 90 degree) Y-axis (-90 degree, 90 degree), Dual axis Analog 0-5V Voltage Output
• (2) Kalman Filtering: Integrated Kalman Filtering Algorithm ensures high-stability of angle data output even in high dynamic environment
• (3) In-built MEMS high-precision module: can directly output angle data (default 10 degree), provide PC software to set the alarm angle
• (4) 0.1 degree Precision, IP67 Waterproof Protection, Anti-vibration
• (5) What you get: 1 x WitMotion SINVT inclinometer(9-36V RS232 version) + 1 x USB-TTL converter +1 x instructions card

• Lifting Height This kit will raise the front of your car by 3 inch.Due to the geometry of the suspension,the ratio of lifting height to kit thickness is not 1:1.The actual thickness of the leveling lifting kit itself is less than the lifting height
• Model Compatibility Suitable for 2005-2019 Tacoma 2WD 4WD (6 lugs only),2003-2019 4Runner 2WD 4WD(Does not fit XREAS Suspension),2007-2015 FJ Cruiser 2WD 4WD.This set will raise the front of your car by 3\"
• Process And Material Forged from 6061-T6 aluminum alloy,CNC automatic processing,surface anodizing and heat treatment,and hardened grade 12.9 bolts are installed in advance,which not only ensures high precision and stability,but also improves the hardness and corrosion resistance of the material
• Easy To Install The leveling Lift Kits is equipped with everything you need for a simple bolted installation. This process can be completed within 2 hours without preloading,cutting or modifying any factory parts
• Service And Warranty All PROEZE products are guaranteed for two years.If you have any questions about our products and services, please feel free to contact us

• American Beauty incorporates two cartridge heaters of equal wattage into each solder pot
• RoHS Compliant
• Wattage: 100 watts

• SxP-Solder Tip Cartridges are the standard soldering tip range for the Metcal MFR-1110, MFR-2210 and MFR-1351-series soldering systems.
• SFP-Cartridges are nominally 390 ?C. for the majority of applications, while SCP-Cartridges, nominally 450 ?C, are for high temperature and thermally demanding applications, and STPP-Cartridges, nominally 330 ?C for light load application.
• Metcal SmartHeat Technology adjusts the power levels during soldering to suit the application.
• Knife, 5 mm, 450 ?C

• Portable

• The package length is 6.89 inches
• The package height is 2.76 inches
• The package width is 4.72 inches
• Package Weight : 4.17 pounds

• VERY VERSATILE: many applications, including pool/hot tub & fish tank water, wood boiler, fridge and deep freezer, livestock water trough, milk, beer, wine, water, steam and pipe temperature monitoring. Additional uses include composting, HVAC/heating/cooling/ventilation management (YoLink smart plugs and switches purchased separately).
• THAT WAS EASY! After the hub is set-up, adding new devices takes just a couple minutes with our app's convenient and lightning-fast Scan & Play QR code scanner. No more waiting for WiFi! Installation can be as simple as hanging the sensor on a nail or command hook, or by placing on or inside the box or enclosure to monitor.
• KNOW NOW: be informed immediately of off-normal conditions when you easily set up one or more optional notification methods, including SMS*, phone push notifications, emails, siren and/or SpeakerHub audible notifications for your home or business. *Each YoLink app account receives 5 free SMS per month per device plus five. Additional 200 or 500 SMS are available for 2 and 5 dollars per month, respectively. There are no required subscriptions and the app is always free.
• NO WIFI WORRIES! And no WiFi required! YoLink utilizes a unique wireless format very different from WiFi. Based on LoRa, our devices boast 1/4 mile open-air wireless range, long battery life, and superior obstruction penetration (allowing for placement inside freezers, etc.). Communication is two-way encrypted, protecting your network security and privacy.

• Fast Heating & Auto Heating - SI012 Pro soldering iron controls the intelligent temperature between 100-450 degree C /223 to 1000?, reach melting point 800 in just 8 seconds, no long heating process before using. Automatic heating when starting, save more time on welding.
• SAFETY WARNING - With buzzer, it has a soldering iron tip warning that can help check the condition of the tip, a high voltage warning protects the iron pen from high voltage. The low voltage warning can warn the user to use the correct power supply and make sure the tip works normally. Ultra temperature warning and PCB high temperature warning protect the tip and PCB board (circuit board)
• 3 MODES SWITCH: In working mode, the soldering iron will enter sleep mode automatically without any operation. The temperature will be automatically set to SleepTemp. In sleep mode, automatically restore by pressing or turning the rotary switch or shaking the soldering machine. If it does not wake up, during IdleTime it will stop working and enter Stop mode. After 180 seconds and can come out by pressing or turning the rotary switch or shaking the soldering iron.
• OLED Display & ?/ degree C Conversion - A clear display of temperature preset will bring more convenience in preheating, temperature setting and welding. With Fahrenheit and Celsius conversion function, you can choose between Fahrenheit and Celsius to meet different usage habits
• Wide Application Widely used for soldering circuit board, home appliance repair, jewelry making and metal headdresses, computer hardware and various DIY repaired uses, small electronic works, etc.Very suitable for beginners, welders, basic household equipment, welding engineer training, etc.

• PRODUCT SIZE & PACKAGE - 19.6 inch X 4 ft (50cm X 122cm), 20 mesh, Aperture 0.77mm/0.03inch, wire diameter 0.5mm/0.02inch; 2.3kg/5lb. NOTED Package: The stainless steel mesh screen is rolled in mailing tubes with caps, intact packaging, no creases.
• PREMIUM MATERIAL - The stainless steel mesh screen are made of high-qualified 304 stainless steel, mesh is well made. anti rust, anti acid and alkali, anti-corrosion, and long service life. High temperature resistance, high strength, strong tensile, wear resistance. The smooth surface facilitates quick cleaning.
• 304 STAINLESS STEEL MATERIAL - Durable, very stiff and heat resisting and not rusty, mesh screen roll is cut with tin snips, because it's sturdy, you can cut off any shape you need.
• WIRE MESH SCREEN PRECAUTIONS - Because the mesh screen is rolled up and put into the mailing tubes with caps, and the screen is strong, before you use the screen, please wear gloves, please flatten the screen under a full flattening surface under load, and then use tin scissors to cut carefully.
• MULTIFUNCTION FINE MESH SCREEN - Wire mesh screen can be used for security mesh, building meshes, It's also suitable for a variety of filtration, dust removal and separation, such as septa, sieve powder, or air conditioning, range hood, air filter, petroleum, chemical and other industries filtering. It was an easy material to handle, this material for any application that would be satisfied by fine mesh metal screen.