Industrial & Scientific Store - Robotics

• Te-6000-1
• Johnson Controls TE-6000-1 temperature sensor
• Johnson Controls

• Measures temperature from -58 to +482 degrees F (-50 to +250 degrees C)
• Probe bends at a 45-degree angle and has a flat sensor for surface contact
• Coiled lead with a sub-miniature connector stretches to extend reach

• Intermatic WG1570-10D 125 VAC, 60 Hz Motor for T101, T103, T105

• Type-K thermocouple extension cable with male and female connectors adds length to a probe cable or adds a coil to a stick probe
• Withstands temperatures up to 176 degrees F (80 degrees C)
• Polyurethane outer jacket for protection from heat and damage
• Coils retract to 12\" and extend to 48\" for flexibility

• Polyurethane TPU Rubber Rollers TPU rubber rollers are made of high-quality polyurethane TPU material, with good friction and extremely long service life, other parts are made of aluminum, which will not be easily deformed.
• 30KG Single Wheel Load TPU rubber rollers use one bearing at each end for smoother operation and strong load, 45 degree omnidirectional wheel, single wheel load 30KG.
• Allowing Robot All-round Motion The mecanum wheel allows the robot to achieve all-round motion, not only travel forward and backward, but also side to side, supporting larger loads, with 50mm / 2in wheel width, 100mm / 4.0in ?diameter.
• Good Rigidity Macanum Wheel & Wheel Coupling Macanum wheel(left) and wheel coupling included, the main body is stamped from aluminum, which has good rigidity and strong impact resistance.
• Quality Guarantee Before leaving the factory, this product has been strictly supervised, built to meet standard specification, and strictly follow factory quality control, you can use it with confidence.

• Full Line of Versatile Sensors
• Single Assembly Ordering Simplifies ordering; provides a complete assembly in one box
• Models Featuring an Integral National Pipe Thread (NPT) Adaptor Increase sensor connection strength, which eliminates the need for a special adaptor
• Models with a Stainless Steel Sensor Probe Protect the sensor while increasing corrosion resistance
• Metal Enclosure (TE-63xxE, TE-63xxM, and TE-63xxV Models) Meets plenum requirements

• NOTE: All the carbon fiber tubes will have a deviation of +/- 0.15.
• 3K Pure Carbon Fiber, use for RC Quadcopter, Multicopter, Helicopter and Airplanes.
• Outer Diameter: 22mm Inner Diameter: 20mm
• Length: 420mm
• Package Includes:4 pcs x 20mm*22mm*420mm carbon fiber tube (Matte Surface)

• Connector Type: Mini Connector
• Junction: Grounded
• Probe Type: K
• Sheath material: 304 Stainless Steel
• Temperature Accuracy: ?3.0?F (1.1 degree C) or ?0.4% reading above 212?F(100 degree C); ?3.6?F (2.2 degree C) or 2% of reading between -58 to 211?F (-50 to 99 degree C); ?7.2?F (4 degree C) or ?4% of reading between -60 to -238 (-51 to -150 degree C), whichever is greater

• Robot Butterfly
• Tm 31 for compatible mixing
• High-quality workmanship

• Integrated ignition trigger for easy startup (No independent ignition tool required)
• 14-piece kit offers versatile accessory range for: soldering, hot cutting, shrinking, wood burning and area heating
• Variable temperature for precise control
• Flame lock-on for simplified operation on extended use projects
• Premium Quality for long life durability

• Matter Certified
• Works with Apple Home
• Works with Samsung SmartThings
• Works with Google Home
• Measures Temperature, Humdity and Air Pressure
• Uses Thread for Low Power

• Excellent Internal Components:Internal ASIC devices, high reliability, long life, strong anti - interference performance.
• Important Parameters:The Output Phase is A, B, Z Phase; the Outer Diameter is 38 mm, the Thrust Shaft Diameter is 6mm, the Radial Shaft Loading is 30N, the Thrust Shaft Loading is 20N.
• Safety Design:With load short circuit , power supply reverse wiring , safer and more
• Input Voltage:The rotary encoder uses corresponding power supply voltage DC5 ~ 26V (open collector output type).
• Stainless Steel Spindle And Metal Shell:Stainless steel spindle with higher stability and ability, metal shell is more solid and impact resistance.

• Measures 2.4 inches diameter (60 mm) by 4.1 inches long (104 mm)
• No-load rpm: 4900 at 24 volts; Can be used with voltages ranging from 12V to 48Vdc
• Maximum power: 233 watts (0.31 horsepower); Maximum stall torque: 1.8 Nm (250 oz-in.)
• Peak efficiency at 24V: 70% at 7 amps and 4200 RPM
• Power and torque at peak efficiency: 117 watts (0.16 horsepower), and 270 mNm (38 oz-in.)