Industrial & Scientific Store - Robotics

• Best quality It has high precision, high sensitivity, high stability and durable use.
• FEATURE The internal high output device when used to accurately amplify the sensor sensor, internal voltage regulation, constant current flow, voltage conversion and voltage ratio, adaptation of the 'impedance, linear compensation, humidity compensation, etc.
• PROTECTION FUNCTION With external zero adjustment of standard , external gain function, input overload protection, output short circuit protection.
• USAGE This load cell transmitter can be directly connected with the PLC single-chip host computer terminal or computer interface of the automatic control device.
• CONVERTION RANGE Convert the mechanics and output quantity of the standard current and voltage , which can be switched from 0 ~ 5V / 0 ~ 10V.

• 4 pre-set V/f modes; 1 user-defined V/f program
• Input: Three phase 415V AC, 50/60 Hz
• Output: Three phase 415V AC, 0 to 400 Hz
• Output power: 2HP/1.5kW
• 5 (PNP/NPN) Inputs, 2 Analog Inputs (0-10 V/0-20 mA/4-20 mA), 1 Relay Outputs, 1 Analog Output (0-10 V/0-20 mA), and 1 Open Collector Outputs
• Supports the RS485 Modbus Communication Protocol
• Protection against Over voltage, Under voltage, Over temperature, Over load, Under current, Over current and Short circuit
• Suitable for applications like pumps, fans, conveyors, food and drink packaging machinery, industrial washing machines, and most general industries, etc.

• Material Alloy steel
• Type S-shaped , micro load cell can bear both tension and pressure
• Feature With overload protection device, good output symmetry, high accuracy, compact structure and complete specifications
• Suitable for Batching scale, electronic-mechanical scale, crane scales, automatic weighing instrument and other force value measurement and control
• Service guarantee CUSTOMER FIRST, if you are not sure about the size or have any issue about the product, please feel free to contact us via email. We will provide help for you

• Rework & Soldering 2 in 1 SMD Hot Air Soldering Station for Electronics Repair.
• Hot Air Gun PartHeat quickly, only 15 seconds temperature can reach 450?. Adjustable temperature and air flow, air volume is strong and gentle, can be a variety of purposes.
• Soldering Iron PartLED display, high power, quick warming-up, temperature accuracy and stabilization.
• Automatic Sleep SystemThe hot air rework station'ssystem has automatic cold air function, can extend the life of the heater and protect the hot air gun.
• Widely UsedThis soldering station with heat gun designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering.

• Heavy Duty

• Small size, Strong driving ability
• It can be directly mounted onto NEMA 17, 23, 24 series stepper motors.
• Miniature size 42.3 x 42.3 x 16.5 mm
• 1.5 - 4 A adjustable output current
• 5 selectable microstep resolutions including 100,200,400,800,1600

• Efficient and Fast Soldering Tip Cleaner: Compared to traditional brass wool tip cleaner, this tool can remove dirty solder from the soldering tip in just 2 seconds. This tool is suited for those who need the tip cleaned in an instant for continuous soldering work.Note: The tip cleaner is designed to work with soldering iron tips that have an outer diameter between approximately 4.6mm to 5.5mm (eg. Soldering irons that use 900M series, YIHUA #1200, YIHUA #1300, YIHUA #1401). Before purchasing, please measure the diameter of your soldering iron tip to ensure it falls within this compatible size range.
• Smart Sensor Technology: This soldering iron tip cleaner features infrared sensor detection for automatic activation when the soldering iron tip is within proximity. The brass cleaner is equipped with two rotating brass wool brushes powered by a stepper motor for fast cleaning. Great for improving soldering workflow and efficiency.
• User-friendly Design: This copper cleaner's compact and lightweight design saves the user's precious workspace. It is only 4.33*2.76*2.95 inches (L*W*H) in dimension, ideal for a workbench with limited space. The soldering iron tip cleaner features a heat-resistant metallic front panel to prevent accidental damage when in contact with heated soldering iron tips. The brass cleaner's compact body also includes a detachable solder residue tray for easy cleaning and convenient use.
• Complete Soldering Tip Cleaner Kit: This soldering iron tips cleaner is complete with necessary accessories and replacement parts, such as 2-prong US-specification 12V power adaptor, 4 extra brass wool brushes for replacement, and a pry bar for case opening and brush replacement, an essential addition to your soldering accessories.
• Choose YIHUA with Confidence - Enjoy our 12-month US- exclusive manufacturer technical coverage and 24/7 professional assistance on Amazon. Note: This model is designed to operate on 110-127V with a US-standard power plug.

• WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp any project (circuit board) to solder, paint or repair with precision. Work smarter not harder!
• STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) to the base then clip a project using the 360 rotating alligator clamps with locking thumb nuts. Connect, move and position the 4 magnetic, adjustable arms so you work with ease and accuracy.
• COMPACT & PORTABLE BASE: Smallest vise kit. Strong magnetic attraction lets you stick the arms anywhere on the steel base. A flat bottom with no feet can be used between a vise base and clamp. Throw in your bag and go - perfect for electricians!
• INNOVATIVE FLEX DESIGN: Free your hands! Flex Plus kit is the perfect work station assistant. Heat resistant arms lets you steadily use a soldering iron for prolonged periods of time on electronics and can even be used when working on machinery or cars.
• SATISFACTION GUARANTEE: QuadHands is engineered to last and designed to provide a third hand right where you need it. Made in the USA, we offer a lifetime satisfaction guarantee. Not happy with a product We will repair, replace or refund your money.

• Use for multi-rotor such as Tri, Quad, Hexa, and Octo...etc.
• Designed for Multi-rotor fast transient
• 2 x Emax MT2213-935KV CW Brushless Motor

• TS101 uses DC and PD dual power input. The power range of the DC5525 interface has been extended to DC 9-24V (up to 65W). A USB-C interface replaces the original Micro USB interface, which serves for firmware upgrades, and a standard PD power input of up to 45W.
• The TS101 Soldering Iron embeds a smart processor chip to accurately control temperature and monitor the soldering iron tip. It also has an automatic sleep mode and an automatic overheat warning.
• The newly added \"Boost\" heating function can quickly heat up in a short time to meet the welding needs of special scenes. Also, the temperature is displayed on the OLED screen, which can be accurately and easily adjusted from 122 F to 752 F (50 C to 400 C).
• TS101 controller has a sharp and tough overall appearance and uses a larger 128*32 pixel OLED screen to display more heating data.
• TS101 and TS100 use the same soldering iron tips, so your existing TS100 soldering tips can continue to be used for this upgrade version of iron.

• It Will Fit Directly
• Genuine Oem Replacement Part
• Package Weight: 2.0 Pounds
• Package Dimensions: 4.0 L X 4.0 H X 3.0 W (Inches)

• With this kit you can create amazing projects. The tutorials are easy to use
• All the components are ready to use. You can connect them using the protoboard and the cables.
• Pdf with More than 30 Tutorials with rich images and Diagrams available for download in the product page
• External Power supply not included. But we include a power adapter module.
• More than 36 types of components included . More than 70 items.
• For creators ages 12 and up
• With this Kit you can learn to create an access control system, a small robot, detect obstacles, presence, movement, build a siren and beacons and much more.
• Learn how to use the servo, motor, ultrasound sensor and other components using the lessons included in the CD.
• Would you like to detect water Do it with the water level sensor included.
• Hot in summer Build an small air conditiones with the fan included.

• The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control
• Whether you want the best servo control available (0.25's resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver
• This fully-assembled version ships with header pins installed

• Portable

• Ultimate Friendly Starter KitWITHOUT micro: bit!!! The Easy Plug Starter Kit contains 21 sensors modules and an Easy Plug shield for micro:bit, also with a micro USB cable. It's a great gift for kids and also good for adults to build things more advanced and more fun.
• Super Advanced to Get StartedThe expansion board is well-made and rich in RJ11 6P7C interfaces. It is much more safe and fast to connect multiple sensors. In addition there are sensors of all kinds to do many projects: PIR motion sensor, IR Receiver, LED modules, OLED display, light sensor and many others.
• Tutorials Easy to Follow It supports MakeCode graphical programming, JavaScript programming, Python code and other programming modes. Provide 33 projects with demo codes, documents and circuits to get started, which you can find, searching for 'wiki keyestudio ks4022'. It serves to get started in programming without having to write lines of code.
• Fantastic Package GiftAll the components are contained in a beautiful transparent acid green case that inside it also contains a removable compartment. It is a good box for those who learn to approach this programming world, or a good gift for kids passionate about electronics.
• Warm Note & SupportYou will need to prepare the micro:bit v1 or v2 board and 6 AA dry batteries additionally. Our technical support team is ready to answer any questions.