Industrial & Scientific Store - Robotics

• Package Dimensions: 1.2 L x 5 H x 1.3 W (inches)
• Package Weight: 0.06 pounds
• Country of Origin : Mexico

• Main Control Chip: BIGTREETECH Octopus V1.1 control board adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash ROM. Notice: Input voltage only supports 24V, 12V is not allowed.
• CAN BUS: BIGTREETECH Octopus V1.1 32bit control board supports CAN Bus connectivity using an ethernet connector. This CAN Bus connection allows to expand control board with other expansion boards very easily.
• 6 PWM Fans Plus 2: The Octopus V1.1 Mainboard offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V. The BTT Octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.
• Supports Klipper/Marlin: BIGTREETECH Direct Octopus V1.1 32bit control board compatible with BTT Pi V1.2/Pi 2, supports running Klipper and Marlin, supports firmware update by USB (recommended) and DFU mode(advanced users). Updating via DFU mode is to send firmware to the board directly from PC with no need for bootloader, which is not recommended for novice users.
• Type C powers the MCU: Plug the jumper cap into the 5V USB power supply port of the motherboard. You can use the Type C interface to power the motherboard, which makes it easier for the computer to program firmware. If the jumper cap is pulled out, the switching power supply must be turned on when the motherboard is connected to the PC.
• Multifunctional interface: BTT Octopus V1.1 control board support Eddy V1.0, BLTOUCH, Microprobe auto bed leveling sensor, SFS V2.0 smart filament runout, power loss detection, CEB V1.0, SKSM V1.0, automatic power down. Display support TFT35 E3 V3.0.1/TFT35 V3.0/TFT50/70. When running Klipper touch mode, please choose HDMI5 V1.2 Touchscreen.

• 4 x 40A ESC
• 4 X 2500KV BLDC Motor
• 4 X 9 inch Propeller (2X clockwise & 2X Anti Clockwise); Propeller: 9 x 4.5 inch (9045)
• Application: Quadcopter, Airplane, Helicopters, DIY Projects
• Soldered Bullet connectors to motor and esc for easy connection.

• Temperature: 75 Series
• For Use With: TMT-2000S-TZ, TZ-KIT-3 w/TMT-2000S
• Tip Style: Tweezers
• Tip Width: 0.04\" (1.00mm)
• Tip Length: 0.32\" (8.20mm)

• LTA, LTB, LTC, LTD, LTH, LTK, LTL, LTM, LT4, LT4X, LT1, LT1L, LT1S, LTS, LT1LX, LTO, LTKN, LTAA, LTBB, LTCC, LTDD (Total 21 Pieces)
• WELLER LT Replacement Soldering Tip, Solder Iron Tips, Handle Tip, Solder Bit, Pencil Tip
• Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects
• Compatable Stations/Irons: WELLER WD1000,WD2000,WSD81,WS81,WSF81D8,WS81D5/WELLER WP80,WSP80,WSFP8
• No Matter for precision electronics but also drag soldering,DIP chips,Narrow Tip for Some Tiny Work,LED and board wiring,Raspberry Pi Zero Projects

• [Quick Temperature]: Good heating performance for quick temperature rise. Better heat transfer effect, stability and reliability, very practical, easy to operate, high toughness, high density, soldering temperature less likely to change over time, longer life than conventional soldered tips.
• [Various Types Tips]: Provides 4 types ST-B2/C4/K/D24 of thick round head/big horseshoe /big knife shape/flat head shape soldering tips to meet your different soldering requirements.
• [Great Soldering Effect]: Made of high-grade Stainless steel alloy with high hardness, high temperature resistance, anti-oxidation and long-term use. Fine workmanship, standardized design, good tin soldering effect.
• [Eco-friendly Tip]: All ST series soldering pen's tips made of Eco-friendly and lead-free materials, harmless to human.
• [Perfect Replacement]: These soldering iron tips are perfect replacement part for Pinecil solder pen, PTS200/TS100/TS101 mini pencil soldering iron, and other micro soldering iron pens models on the market.

• Portable

• Temperature: 75 Series
• For Use With: TMT-2000S-P, TMT-2000S-PM, MFR Systems
• Tip Style: Blade Tip
• Tip Width: 0.41\" (10.41mm)
• Tip Length: 0.35\" (9.00mm)

• Temperature: 700 Series
• For Use With: TMT-9000S-1, TMT-9000S-2, MX-500, MX-5000, MX-5200
• Tip Style: Hoof w/Dent
• Tip Width: 0.09\" (2.40mm)
• Tip Length: 0.57\" (14.50mm)

• 4x ESC: 40 Amperes
• 4x 2500KV BLDC Motor
• 4 x 10inch 1045 Propeller (2x clockwise & 2x Anti Clockwise)
• Application: Quadcopter, Aeroplane, Helicopter, RC Car, DIY Projects
• Soldered Bullet Connector to Motor for easy connection.

• ModleFS-N13 Diffuse Relection. Detection distance (farthest distance mm): 100 for reflection, 400 for countermeasure.
• Supply VoltageDC 12-24V (brown-positive pole, blue-negative pole, black-signal output).
• Simple SetupOne push setting with the PRESET Button?Laser, fiberoptic, and photoelectric models all sharethe same simple functionality.
• Features It is a sensor type component with sButton ,adjustment switch, output indicator light and signal strength indicator light, high sensitivity and low delay.
• Scope of applicationSpecially suitable for relay amplification for long-distance optical communications. (Recommended to use with the store's optical fiber).

• Smart Soldering Iron:TS101 uses DC and PD dual power input.DC5525 interface has been extended to DC 9-24V (up to 65W).USB-C interface replaces the original Micro USB.PD 9-28V power input up to 90W. Design of 128*32 pixel OLED screen.
• Fast Heating:Heats up in about 10s seconds. 50-400 adjustable temperature range with smart algorithm compensation ensure accurate temperature control.
• More Smart:New functionauto sleep, auto screen off, timely monitor the soldering tip status to avoid short circuit protect control handle.Support 3 groups default heating temperature and one key turbo boost heating mode make your soldering projects faster and less time-consuming.
• Portable and Mini:168mm long compact pen shape size,built-in smart MCU with application layer open source design,use USB-C Silicone cable can be powered by laptop power supply, the power bank or smart phone quick power charger directly to reset own temperature rising curves and custom functions.
• Package List: TS101 Controller (Gray) x 1;Soldering I Tip x 1;Anti-slip Cap x 1;USB-C Silicone Cable x 1;User Manual x 1;