Robotics By OONO

• Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 18 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.)
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 5.0mm/0.197\", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
• Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected load and the fuse has blown or has been unplugged, fail indication LED will turn on.
• FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two M3 x 10mm wood screws, you can easily mount it on a wooden board.

• Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 18 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.)
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 5.0mm/0.197\", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
• Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected load and the fuse has blown or has been unplugged, fail indication LED will turn on.
• FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two M3 x 10mm wood screws, you can easily mount it on a wooden board.

• Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
• Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.
• High quality aluminum enclosure, thickness 1.5mm/0.06\". Diameter M6 / 6mm threaded copper terminals for power supply and load. Connect switch terminal block: pitch 5.0mm/0.197\", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28\", Metric M2.5 slotted screw.
• Operating Voltage: 10 ~ 15V DC, Rated current 50 Amp. Power on indicating red LED. Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green.

• Working voltage AC 70 to 250V. Maximum total input current 30 Amps. 12 Channels output, each channel maximum output current 10 Amps.
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 7.62mm/0.3\", wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.
• Rocker switch ON/OFF power output for each channel. With switch power ON LED indication function.
• High quality fireproof nylon material DIN rail mount carrier, can support width 35mm 32mm 15mm rail. FR-4 fiberglass dual copper layers PCB.