Robotics By PGFUN

• This 3-coordinate XYZ axis CNC probe is designed for wide DIY CNC applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing. ( Tips: It's developed for DIY applications, not recommended for industrial use.)
• Main Specs: power: DC5-24V, NPN-NC wiring (Low-level IO signal output when powered and turns to High-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feed rate: 50-200 mm/min, over travel protection distance: XY- ?4mm/0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 1.6 N. (Note: if working with a tool setter to test the height of the probe, please ensure the sensitivity of the tool setter is better/ trigger force less than 1.6 N.)
• Application: theoretically it can work with GRBL, MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input (contact your software, and controller manufacturer or lookup forums for probe wiring and connections).
• Upgraded Digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it look great and protects the touch probe well from dropping. Besides, this tool can be modified to a tool setter by a tool setter base and flat tip.
• Package Includes: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, tungsten steel ball tip x 1, wire connector kit x 1 (to solve the lack of control board wiring ports and extend the wire ).

• Easily processes large-capacity G code or PLT file based on 512MB RAM, compatible with TYPE3, ARTCAM, CASTMATE, Pro/E, MasterCAM, Cimatron, UG Software, etc., so it works for most CNC routers on the market.
• Multi-function CNC Controller: multi-coordinate memory function, intelligent file checking, parameter backup and restore function to prevent the loss of important parameters, Intelligent processing memory, supports power fail safeguard and breakpoint memory.
• Customizable I/O interfaces provide a wide development platform, there are 8 input and output signals in every basic I / O signal node, the expansion I / O nodes can be expanded to 32 input and output signals, which is convenient for secondary development and meets the needs of different machine, project, and application.
• The system supports high subdivide controlling, to make the motor/machine smooth processing at high speed, which ensures process efficiency and saves processing time.
• DSP A11E ( English Version) is the upgraded DSP 0501 three-axis linkage motion controller, with more reliable functions, the upgraded A1X series controller contains A11, A12, and A18 controllers, if you do not know the difference between the controllers, please contact us first in case of purchasing by mistake.

• This 3-coordinate XYZ axis CNC probe is not recommended for new DIY users, before purchasing, please make sure your machine needs an NPN-NC touch probe, rather than an NPN-NO probe, and you know how to wire and how to connect to the software or edit the scripts.
• Functions & Features: fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.
• Main Specs: power: DC5-24V, NPN-NC wiring (Low-level IO signal output when powered and turns to High-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ?4mm/0.16 in, Y- ?4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.8N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
• Application: theoretically it can be compatible with most 3-wire probe systems, like MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, GRBL, Centroid Acorn, Mach Motion, Masso, EMC2, and other CNC control software with a probing routine and a control board that will accept probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
• Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip (plate).

• Easily processes large-capacity G code or PLT file based on 512MB RAM, compatible with TYPE3, ARTCAM, CASTMATE, Pro/E, MasterCAM, Cimatron, UG Software, etc., so it works for most CNC routers on the market.
• Multi-function CNC Controller: multi-coordinate memory function, intelligent file checking, parameter backup and restore function to prevent the loss of important parameters, Intelligent processing memory, supports power fail safeguard and breakpoint memory.
• Customizable I/O interfaces provide a wide development platform, there are 8 input and output signals in every basic I / O signal node, the expansion I / O nodes can be expanded to 32 input and output signals, which is convenient for secondary development and meets the needs of different machine, project, and application.
• The system supports high subdivide controlling, to make the motor/machine smooth processing at high speed, which ensures process efficiency and saves processing time.
• DSP A11E ( English Version) is the upgraded DSP 0501 three-axis linkage motion controller, with more reliable functions, the upgraded A1X series controller contains A11, A12, and A18 controllers, if you do not know the difference between the controllers, please contact us first in case of purchasing by mistake.