Robotics By RATTMMOTOR

• Basic Parameters - Diameter: 80 mm x Length: 195 mm, Power: 2.2KW, Voltage: 220VAC, Current: 8A, Frequency: 0-400Hz, Collet Size: ER20, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
• Cooling Method - Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
• Rotation Accuracy - The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
• Material & Configure - The spindle has fine workmanship, 3 bearings, stainless steel body and dustproof design make the spindle more durable.
• Main Application This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.

• LAN5160T4 Controller Introduction The LAN5160T4 control board is a newly researched and developed all-in-one 4-axis drive control board with a control cycle of 2 ms per position and high control accuracy. The maximum single axis output pulse is 300KHz, the maximum subdivision is 256, the maximum current is 6A and the common stepper motors are supported.
• LAN5160T4 function Support mach3 control, and computer communication using Ethernet communication method. Equipped with hand pulse interface, supports serial electronic handwheel.
• Equipped with a 4-axis digital handwheel With X1/X2/X100 triple gear ratio, optional emergency stop switch for control switch. the all-plastic housing has high insulation strength, which can realize 4 axis (or 6 axis) selection switching. Metal gear, accutate scale, high precision and good texture.
• LAN5160T4 performance parameters maximum output 300KHz per channel; 7 common digital input interfaces; 3 common digital output interfaces; 1 PWM spindle speed output; support 4 channels stepper motor control, single channel maximum 300KHz control pulse output; ARM main control chip..
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque?0.5NM; Diameter: 52mm.
• Speed Controller: Input Voltage: AC100-AC220V?10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
• Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
• With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
• Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!

• Motor specifications: Holding Torque:3N.m; Current:5A; Phase:2; Size:60x60x88mm; Step Angle:1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000
• 2HSS60 Driver: 2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500M?; Voltage: DC 24-50V input
• Advantages: Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev
• More Functions: It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely
• Widely used: Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions including pulley and low stiffness pulley without adjusting the gain parameters

• Model Number:CW8060
• Driver microstep:256 microstep
• Driver input voltage:24-80VDC
• Driver current:6.0A
• Motor Type:Nema23-34 Stepper Motor

• LAN5160T4 Controller Introduction The LAN5160T4 control board is a newly researched and developed all-in-one 4-axis drive control board with a control cycle of 2 ms per position and high control accuracy. The maximum single axis output pulse is 300KHz, the maximum subdivision is 256, the maximum current is 6A and the common stepper motors are supported.
• LAN5160T4 function Support mach3 control, and computer communication using Ethernet communication method. Equipped with hand pulse interface, supports serial electronic handwheel.
• Equipped with a 4-axis digital handwheel With X1/X2/X100 triple gear ratio, optional emergency stop switch for control switch. the all-plastic housing has high insulation strength, which can realize 4 axis (or 6 axis) selection switching. Metal gear, accutate scale, high precision and good texture.
• LAN5160T4 performance parameters maximum output 300KHz per channel; 7 common digital input interfaces; 3 common digital output interfaces; 1 PWM spindle speed output; support 4 channels stepper motor control, single channel maximum 300KHz control pulse output; ARM main control chip..
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• Motor specifications: Holding Torque:3N.m; Current:5A; Phase:2; Size:60x60x88mm; Step Angle:1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000
• 2HSS60 Driver: 2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500M?; Voltage: DC 24-50V input
• Advantages: Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev
• More Functions: It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely
• Widely used: Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions including pulley and low stiffness pulley without adjusting the gain parameters

• Air Cooled Spindle Power: 500W; Idling Speed: 2000-12000r/min; Torque?0.5NM; Diameter: 52mm.
• Speed Controller: Input Voltage: AC100-AC220V?10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
• Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
• With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
• Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!

• Model Number:CW8060
• Driver microstep:256 microstep
• Driver input voltage:24-80VDC
• Driver current:6.0A
• Motor Type:Nema23-34 Stepper Motor

• 23HS2430B Nema23 Stepper MotorPhase: 2 Phase; Type: Hybrid; Step Angle: 1.8 ; Current: 3.0A; Holding Torque: 425oz-in/280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires: \"A+\"=Red / \"A-\"=Green / \"B+\"=Yellow / \"B-\"=Blue; Motor Size: 57x57x112mm
• DM556S Stepper Motor DriverCurrent: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC; Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
• 4 Axis USB Mach3 Control BoardUSB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
• 36V DC Power supply+24V DC Power Supply400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC;selected by side switch to choose input voltage.
• 75W 24V DC Switching power supplyInput voltage: 100-240V AC; Output voltage: 24V; The built-in potentiometer can adjust the output voltage by 10%.Output voltage24V;Rated Current3.2A;Rated Power76.8W; This 24V power supply is used to power the 4 axis usb mach3 control card.
• ApplicationThis cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.